• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.418-418
• /
• 2000

This paper proposes a path planning algorithm for mobile robot. To generate an optimal path and minimum time path for a mobile robot, we use the Genetic Algorithm(GA) and Visibility Graph. After finding a minimum-distance between start and goal point, the path is revised to find the minimum time path by path-smoothing algorithm. Simulation results show that the proposed algorithms are more effective.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.639-647
• /
• 2017

This basic study is focused on the physically removal method of carbon dioxide from the decomposition of ammonium carbarmate to prevent the recombination of ammonium salts. A basic visual experimental set-up was designed and constructed to observe the recombination phenomena from the proper composition of ammonia gas, carbon dioxide gas, and compressed air dilution gas. To quantify the recombination phenomena, a simple device was designed to measure the weight change under severe cases for three different tube sizes. The temperature and pressure in the visual tube and the volumetric flow rates of the nitrogen dilution gas were studied and the conditions to avoid recombination were analyzed according to mean free path theory. Diffusivity values based on the Chapman-Enskog theory were calculated from the experimental data. These value may serve as an index for the prevention of recombination.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1289-1297
• /
• 2005

The flow in a microchannel is usually characterized as a low Reynolds number (Re) so that good mixing is quite difficult to be achieved. In this regard, we developed a novel chaotic micromixer, named Serpentine Laminating Micromixer (SLM) in the present study, Part 1. In the SLM, the higher level of chaotic mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other term, lamination) mechanism is obtained by the successive arrangement of 'F'-shape mixing units in two layers. The chaotic advection is induced by the overall three-dimensional serpentine path of the microchannel. Chaotic mixing performance of the SLM was fully characterized numerically. To compare the mixing performance, a T-type micromixer which has the same width, height and length of the SLM was also designed. The three-dimensional numerical mixing simulations show the superiority of the SLM over the T-type micromixer. From the cross-sectional simulation results of mixing patterns, the chaotic advection effect from the serpentine channel path design acts favorably to realize the ideal lamination of fluid flow as Re increases. Chaotic mixing mechanism, proposed in this study, could be easily integrated in Micro-Total-Analysis-System, Lab-on-a-Chip and so on.

• STI Policy Review
• /
• v.1 no.1
• /
• pp.93-109
• /
• 2010

Over the last decade, some Korean enterprises have emerged to become global players in their specialized products. How have they achieved such tremendous technological progress in a short period of time? This paper explores that question by examining the characteristics of technological innovation activities at major Korean enterprises. The paper begins with a brief review of the stages of economic growth and science and technology development in Korea. Then, the existing literature, explaining the Korean innovation model, is analyzed in order to establish a new framework for the Korean innovation model. Specifically, Korean firms have experienced three sequential phases, and thus, the Korean model, at the firm level, can be coined as "path-following," "path-revealing," and "path-creating." Then, the stylized facts in the first phase (path-following) and the second phase (path-revealing) are discussed, in the context of empirical evidence from the areas of memory chips, automobiles, shipbuilding, and steel. In terms of technology development, the Korean model has evolved as "collective learning" in the first phase, "collective recombination" of existing knowledge and technology in the second phase, and is assumed as "collective creativity" in the third phase. Ultimately, all three can be classified as "collective creation". Korean firms now face a transition in the modes of technological innovation in order to efficiently implement the third phase. To achieve remarkable progress again, as they did in the past, and to sustain the growth momentum, Korean firms should challenge new dimensions such as creative technological ideas, distinctive technological capabilities, and unique innovation systems -- all of which connote 'uniqueness'. Finally, some lessons from the Korean technological innovation experience are addressed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.457-457
• /
• 2013

Current-voltage (I-V) measurements of crystalline silicon solar cells was conducted under dark conditions with the temperature range of 260 K~350 K. Using the calculation method, we extracted the crucial factors of ideality factor (n) and activation energy (Ea) to investigate the carrier conducting path in the space charge region (SCR) and the quasi-neutral region (QNR). Values of n were decreased with increasing temperature in both SCR and QNR. We also conformed that the value of Ea of SCR was larger than that of QNR about 0.4 eV. The temperature dependence of n indicates that the carrier conducting path is dominated by carrier recombination-generation in the SCR region than in the QNR region.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2765-2768
• /
• 2013

The effect of $TiO_2$ nanorods (TNR) and nanoparticles (TNP) composite photoelectrodes and the role of TNR to enhance the energy conversion efficiency in dye-sensitized solar cells (DSSCs) was investigated. The 5% TNR content into the TNP photoelectrode significantly increased the short-circuit current density ($J_{sc}$) and the open-circuit potential ($V_{oc}$) with the overall energy conversion efficiency enhancement of 13.6% compared to the pure TNP photoelectrode. From the photochemical and impedemetric analysis, the increased $J_{sc}$ and $V_{oc}$ for the 5% TNR/TNP composite photoelectrode was attributed to the scattering effect of TNR, reduced electron diffusion path and the suppression of charge recombination between the composite photoelectrode and electrolyte or dye.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1248-1251
• /
• 1995

This paper reports some results of an experimental investigation of planar double injection magnetic sensors. The threshold voltage proved to be very sensitive to an applied magnetic field. The magnitude and direction of the threshold voltage variation depends on the field strength and its orientation with respect to the conduction chennel. The positively-directed field pushes the carriers into the bulk causing an increase in the threhold voltage. These results seem to agree with a path modulation due to Lorentz force. The application of a negative field causes a negative variation, which is dependent on the surface recombination velocity of the silicon-$SiO_2$ interface.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1285-1293
• /
• 2014

Several interesting features in trajectory were observed in the direct dynamics study of formaldehyde dissociation above radical dissociation limit. The hydrogen atom deliberately placed on the radical dissociation path can turn around at some distance from C without completion of dissociation and return to HCO moiety, colliding with it just as in a radical-radical recombination and producing a highly energized molecule. Excursion of a hydrogen atom to a distance of 6-8 bohrs and migration of a hydrogen atom back and forth between C and O are two of the most interesting features exhibited by the energized molecule. A series of excursions is seen to lead to a different kind of dissociation resembling roaming-like dissociation characterized by high vibrational excitation of $H_2$ fragment. It is suggested that excursion occurs due to involvement of two different force field systems that exhibit discontinuity in 6-8 bohrs from HCO moiety. We argue that roaming is a non-zero impact parameter version of the excursion.

• Knowledge Management Research
• /
• v.24 no.1
• /
• pp.127-145
• /
• 2023

This paper analyzed a patent trend for technological domain of hydrogen fuel cell, can improve future energy and pollution problems. Patent analysis is used in establishing a technological roadmap which it can discover the current technology capability and future technological development direction. However, the previous patent analysis is qualitative analysis and simple statistical analysis. The reason why it incorrectly analysis patent does not reflect the current technology environment. The current technology environment is development through recombination of technologies. In addition to, the speed of technological development is rapidly growing. So, qualitative analysis does not satisfy the analysis requirements of the times. This paper utilized KP(Knowledge Persistence)-based main path analysis and text mining methods to reflect the current technological environment. As a result, we found core patents, main technology development, and promising technologies for technological domain of the hydrogen fuel cell.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.2
• /
• pp.110-115
• /
• 2011

The effect of $TiO_2$ nanotube (TNT) and nanoparticle (TNP) composite photoelectrode and the role of TNT to enhance the photo conversion efficiency in dye-sensitized solar cell (DSSC) have investigated in this study. Results demonstrated that the increase of the TNT content (1-15 %) into the electron collecting TNP film increases the open-circuit potential ($V_{oc}$) and short circuit current density ($J_{sc}$). Based on the impedance analysis, the increased $V_{oc}$ was attributed to the suppressed recombination between electrode and electrolyte or dye. Photochemical analysis revealed that the increased Jsc with the increased TNT content was due to the scattering effect and the reduced electron diffusion path of TNT. The highest $J_{sc}$ (12.6 mA/$cm^2$), Voc (711 mV) and conversion efficiency (5.9%) were obtained in the composite photoelectrode with 15% TNT. However, $J_{sc}$ and $V_{oc}$ was decreased for the case of 20% TNT, which results from the significant reduction of adsorbed dye amount and the poor attachment of the film on the fluorine-doped tin oxide (FTO). Therefore, application of this composite photoelectrode is expected to be a promising approach to improve the energy conversion efficiency of DSSC.