• 전기학회논문지P
• /
• 제57권4호
• /
• pp.404-407
• /
• 2008

Because of directly receiving the thing in which a microwave is reflected and comparing the frequency, the microwave sensor with doppler effect completely overcomes the problem of the passive infrared sensor. The microwave sensor with doppler effect well operates about a temperature, the dust, and the peripheral noise because of being dull in the most of ambient conditions. The system developed in this research is the electricity saving detection sensor which it senses the real time action of a man as the microwave sensor and automatically turns on the electric lamp and turns off, minimizes the electrical energy consumption. Since the microwave sensor is not influenced in the light, the dust, and the natural element like the ambient temperature, the effectiveness is considered to be superior to the passive infrared sensor being used currently. There was the energy reduction effect more than about 60% in the performed example which established this system. When this was compared with the construction cost, the cost of establishing payback period was about 1-1.5 year. The microwave sensor with doppler effect developed from this research result is convinced in the future to do enough for the electric energy saving.

• 센서학회지
• /
• 제20권2호
• /
• pp.114-117
• /
• 2011

A thick 25 ${\mu}m$ thickness poled P(VDF/TrFE) film pyroelectric infrared ray sensor has been fabricated and then thin 1.6 ${\mu}m$ thickness P(VDF/TrFE) film pyroelectric infrared ray sensor has been fabricated also. These thick and thin P(VDF/TrFE) film pyroelectric infrared ray sensor was mounted in TO-5 housing to detect infrared light of 5.5 ~ 14 ${\mu}m$ wavelength for human body detecting with each other. The noise output voltage of the thick P(VDF/TrFE) film pyroelectric infrared ray sensor were 380 mV and NEP(noise equivalent power) is $3.95{\times}10^{-7}$ W which is the similar value with the commercial pyroelectric infrared ray sensor using ceramic materials as a sensing material. The NEP and specific detectivity $D^*$ of the thin P(VDF/TrFE) film pyroelectric infrared ray sensor were $2.13{\times}10^{-8}$ W and $9.37{\times}106$ cm/W under emission energy of 13 ${\mu}W/cm^2$ respectively. These result caused by lower thermal diffusion coefficient of a thin 1.6 ${\mu}m$ thickness PVDF/TrFE film than the thick 25 ${\mu}m$ thickness poled P(VDF/TrFE) film pyroelectric infrared ray sensor.

• 한국인터넷방송통신학회논문지
• /
• 제11권4호
• /
• pp.31-38
• /
• 2011

본 논문에서는 실내 전력소모를 효율적으로 줄이기 위하여, 무선센서네트워크 기반의 자율 실내조명 제어 시스템을 제안한다. 제안된 시스템에서는 먼저 출입문에 부착된 수동 적외선 (Passive Infrared: PIR) 센서를 이용하여 각 출입문을 통해 실내로 들어오고 나아가는 사람 수를 감지하다. 각 출입문에서 측정된 센서 값들은 무선센서네트워크를 통해 중앙 제어장치로 전송된다. 중앙제어장치는 전송된 센서 값을 이용하여 실내에 사람의 존재 유무를 파악할 수 있는 제어 알고리즘을 통해 실내조명을 자율적으로 제어 한다. 비용분석 및 시뮬레이션을 통해 제안된 시스템이 일상생활에 적용될 경우 약 20%의 전기소모를 절약할 수 있음을 보였다.

• 조명전기설비학회논문지
• /
• 제23권6호
• /
• pp.31-39
• /
• 2009

본 논문은 기존의 자동문시스템의 단점을 개선하여 보다 지능적인 기능을 추가함으로써 통행자에게 편의를 제공하고, 전격손실을 낮추는 보다 효율적인 초음파센서 기반의 지능형 자동문 시스템을 제안한다. 기존의 자동문시스템에서는 물체 및 인체 감지 기능 센서로서 원적외선 열선 감지센서와 근적외선 반사식 감지센서를 사용해 왔나. 기존의 방식은 상황에 맞지 않는 문닫힘에 의한 전력손실, 빠르게 다가오는 물체에 대한 적응 부족, 그리고 안전에 대한 문제점이 있었다. 제안된 초음파센서를 이용한 지능형자동문 시스템은 기존의 자동문시스템에 비교하여 필요없는 문닫힘 방지에 의한 전력손실 방지와 빠르게 접근하는 물체에 적응적으로 자동문이 빠르게 열릴 수 있게 하며, 안전도를 높여 기존 방식의 자동문보다 운용적, 경제적, 안정 면에서 성능을 개선하였다.

• 센서학회지
• /
• 제28권3호
• /
• pp.152-156
• /
• 2019

An ultraviolet (UV) image sensor is an extremely important optoelectronic device used in scientific and medical applications because it can detect images that cannot be obtained using visible or infrared image sensors. Because photodetectors and transistors are based on different materials, conventional UV imaging devices, which have a hybrid-type structure, require additional complex processes such as a backside etching of a GaN epi-wafer and a wafer-to-wafer bonding for the fabrication of the image sensors. In this study, we developed a monolithic GaN UV passive pixel sensor (PPS) by integrating a GaN-based Schottky-barrier type transistor and a GaN UV photodetector on a wafer. Both individual devices show good electrical and photoresponse characteristics, and the fabricated UV PPS was successfully operated under UV irradiation conditions with a high on/off extinction ratio of as high as $10^3$. This integration technique of a single pixel sensor will be a breakthrough for the development of GaN-based optoelectronic integrated circuits.

• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.11-17
• /
• 2019

In this paper, we propose a method to recognize the moving direction in the indoor environment by using the sensing system equipped with passive infrared (PIR) sensors and a deep learning algorithm. A PIR sensor generates a signal that can be distinguished according to the direction of movement of the user. A sensing system with four PIR sensors deployed by $45^{\circ}$ increments is developed and installed in the ceiling of the room. The PIR sensor signals from 6 users with 10-time experiments for 8 directions were collected. We extracted the raw data sets and performed experiments varying the number of sensors fed into the deep learning algorithm. The proposed sensing system using deep learning algorithm can recognize the users' moving direction by 99.2 %. In addition, with only one PIR senor, the recognition accuracy reaches 98.4%.

• 한국정보통신학회논문지
• /
• 제26권1호
• /
• pp.140-145
• /
• 2022

고도화된 현대사회는 도시산업화와 대중교통으로 인한 대기오염 물질 중 미세먼지는 실외에서 실내로 유입되는 현상이 있다. 실내에서 사용하는 미세먼지 측정기는 제한적인 정보 제공과 오염 수치가 다르게 측정되어 사용자에게 원하는 데이터와 모니터링을 할 수 없는 문제점이 발생하고 있다. 이러한 문제점을 해결하기 위해 본 논문에서는 실내 공기 질 데이터 미세먼지와 초미세먼지인 Dust(PM1.0, PM2.5, PM10), VOC(Volatile Organic Compounds)와 PIR(Passive Infrared Sensor)로 미세먼지 측정기와 모니터링시스템을 설계 및 구현하였다. 측정기는 지정한 구역에 설치하여 미세먼지를 실시간 측정하고 Google Cloud Platform의 App Engine을 통하여 데이터 수집 및 저장하고 시각화하여 사용자에게 제공하는 미세먼지 측정기와 모니터링시스템을 제안한다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.73-76
• /
• 2004

0-3 PbTiO$_3$/P(VDF/TrFE) nanocomposite thin films for passive pyroelectric infrared sensors were fabricated by a two-step spin coating technique. 65wt% VDF and 35 wt% TrFE was formed into a P(VDF/TrFE) powder. Nano size PbTiO$_3$ powder was used. 0-3 connectivity of PbTiO$_3$/P(VDF/TrFE) composite film was successfully achieved and observed using SEM photography. The dielectric constant and pyroelectric coefficient were measured and compared with P(VDF/TrFE). A very low dielectric constant (13.48 at 1KHz and sufficiently high pyroelectric coefficient (3.101 nC/$\textrm{cm}^2$ㆍk at 5$0^{\circ}C$) were measured. This nanocomposite can be used for a new pyroelectric infrared sensor to achieve better performance.

• 산업기술연구
• /
• 제32권A호
• /
• pp.109-114
• /
• 2012

In this paper, We studied LED(Light Emitted Diode) sensor lights system using PIR(Pyroelectric Infrared Ray) sensor, CdS and MCU(Micro Controller Unit). And applied the valley fill circuit to improve the power factor. We designed the amplifier for each sensor and the LED driver for constant current which is the buck converter. Also, we proposed the algorithm of LED control by each sensors using MCU. Experimental results showed that power factor is 92% with valley fill circuit.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.236-238
• /
• 2007

[ 0-3PbTiO_3/P$ ](VDF/TrFE) nanocomposites thin films for passive pyroelectric infrared sensor have been fabricated by two-step spin coating technique. 65 wt% VDF and 35 wt% TrFE was formed to a P(VDF/TrFE) poder Nano size $PbTiO_3$ powder was used. 0-3 connectivity of $PbTiO_3$(VDF/TrFE) composites film is achieved and also observed by SEM photography successfully. The dielectric constant, and pyroelectric coefficient measured and compared with P (VDF/TrFE). A very low dielectric constant (13.48 at 1 kHz) and high enough pyroelectric coefficient (3.101 $nC/cm^2$.k at $50^{circ}C$) neasured. This nanocomposites can be used for a new pyroelectric infrared sensor for better performance.