• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.369-372
• /
• 1996

The factory under this study consists of mixed-model assembly lines and workcenters which provide parts to the main lines. Parts produced by the workcenter have different specifications for different product models. The workcenters fabricate parts in batches, and they are divided into two types. A type 1 center supplies parts only to the main line that is designated to the center while type 2 center provides parts to all the main lines. The purpose of this study is to develop a scheduling scheme for the workcenter, and the main objective of the schedules is to provide parts for the main lines without delay. The facts that make the scheduling challengeable are that 1) the different models existing together on a main line request different parts, 2) the spaces for part inventories are limited and 3) set up times are sequence dependent and long in some cases. This study presents developed scheduling schemes for the type 1 center and explains the scheduling and control structure used.

• 생약학회지
• /
• 제22권2호
• /
• pp.85-90
• /
• 1991

The seasonal variation of two flavonol glycosides, icariin and epimedoside A, in the aerial parts and underground parts of Epimedium koreanum from June through September was investigated. The icariin concentration was decreased with time in both parts. Epimedoside A concentration was fluctuated, being highest in June and lowest in July in the underground parts. In the aerial parts, however, it was almost same in concentration. Determinations were made of the occurrence of two new flavonol glycosides, 2‘-O-rbamnosyl ikarisoside A and 2’-O-rhamnosyl icarisid II in the aerial parts and their changes in concentration were similar to those in the underground parts, being highest in July in both parts.

• 대한안전경영과학회지
• /
• 제12권2호
• /
• pp.133-138
• /
• 2010

The environmental regulation of a product is a global trend. The environmental regulation directives such as RoHS, WEEE, ELV and REACH have impacted Korean export-oriented auto parts manufacturer and affects the export of the product to aboard. In electronics manufacture and auto parts manufacturer, there are different systems for environmental regulation compliance. Nowadays the automotive mechatronics parts in a car are increasing. The HEV and intelligent car will need more mechatronics parts. It is necessary to apply the environmental regulation system of electronics to the automotive parts. In this paper, we proposed the application of PDX standard used in electronic industry to the BOM of the auto parts manufactures and showed an example of generated BOM for selected auto part using PDX. The PDX-based BOM can be used for the recording of environmental substances of the automotive mechatronics part and help the collaboration across auto parts manufactures in accordance with environmental regulation.

• 한국지역지리학회지
• /
• 제7권3호
• /
• pp.29-43
• /
• 2001

본 논문에서는 제주도의 기후 자료와 문헌 자료, 현지 답사 자료를 분석하여, 기후 특성과 관련된 제주도의 민가 특성을 파악하고자 하였다. 여름철의 강수와 습도는 한라산 남쪽의 민가에, 겨울철의 바람은 한라산의 북쪽 민가에 영향을 미쳤다. 축굽은 강수와 관련이 있으며 제주도 전역에 분포한다. 재창문은 여름철 습도가 높은 한라산의 남쪽에 분포한다. 겹집 구조와 낮은 처마, 완만한 경사의 지붕, 돌담 등은 제주도 전역에 분포하며, 강한 바람과 관련 있다. 겨울 계절풍이 강한 한라산 북쪽에는 이중문이 보편적이며, 북쪽 해안지역에서는 이문간이 추가된다. 외벽, 풍채, ㄱ랑채 등은 강한 바람과 동시에 많은 강수에 대비한 것이다. ㄱ랑채는 한라산 북쪽 전지역과 한라산의 남동쪽에 분포한다. 한라산 남쪽의 민가가 한라산 북쪽의 것보다 개방적이다. 한라산 북쪽의 민가는 이문간의 유무에 의해 해안형과 중산간형으로 구분할 수 있으며, 한라산 남쪽에서는 ㄱ랑채 시설의 빈도에 의해 동부형과 서부형으로 구분된다.

• 한국군사과학기술학회지
• /
• 제15권3호
• /
• pp.231-240
• /
• 2012

During the past two decades, Metal Injection Molding(MIM) has become a very competitive technology to fabricate small, precise and complex-shaped parts in large quantities. In this research, the applicability of MIM technology in the mass-production of the high precision fuze parts to save manufacturing cost was investigated. The water-atomized 17-4PH stainless steel powder, one of the best corrosion-resistant high strength materials, was injection-molded into real-shape fuze part and flat tensile specimens. The injection-molded parts were thermally debound in hydrogen gas flow without solvent extraction. Sintering of the debound parts was carried out in vacuum at temperatures ranging from $1150^{\circ}C$ to $1370^{\circ}C$. The sintering behavior, mechanical properties, dimensional precision, corrosion resistance of the MIMed 17-4PH stainless parts were investigated. It was found that almost all the properties of the MIMed parts were comparable to those of the mechanically machined parts. Also, actual military field tests using both MIMed and mechanically machined fuze parts were performed as well and were found to be very successful.

• Industrial Engineering and Management Systems
• /
• 제4권2호
• /
• pp.198-206
• /
• 2005

The single sourcing policy, in which an automobile manufacturer purchases identical or similar parts from one supplier, has an advantage of scale economy. Meanwhile, multiple sourcing policy, which allows procuring similar parts from multiple suppliers, has benefits of dispersing risks and promoting competition among suppliers. This paper analyzes the procurement policies by presenting a model of the Japanese automobile parts trade. It concludes that maturity of technology involved should be taken into account besides above-mentioned factors which have traditionally been recognized. For parts produced using evolving technologies, the single sourcing enhances purchaser’s benefits because of the scale economy in learning process. In the meantime, multiple sourcing is more beneficial to the purchaser if the parts are based on mature technologies. In either policy, if the technology involved is evolving, motivating suppliers by returning a great part of cost reduction as a reward to them may eventually increase profit for the purchaser. The conclusion supports the situation where the number of suppliers is being cut down as the trend of modularization and system deliveries of parts progresses in the auto parts industry, and suggests that returning part of benefits to parts suppliers may be encouraged from the viewpoint of auto manufacturers’ own interest.

• Journal of Computational Design and Engineering
• /
• 제2권4호
• /
• pp.248-252
• /
• 2015

Currently composite manufacturing process, such as linear friction welding plus NC machining, is the main method for the manufacturing and repairing of complex parts with integrated structure. Due to different datum position and inevitable distortion from different processes, it is important to ensure sufficient machining allowance for complex parts during the NC machining process. In this paper, a workpiece localization approach for machining allowance optimization of complex parts based on CMM inspection is developed. This technique concerns an alignment process to ensure sufficient stock allowance for the single parts as well as the whole integrated parts. The mathematical model of the constrained alignment is firstly established, and then the symmetric block solution strategy is proposed to solve the optimization model. Experiment result shows that the approach is appropriate and feasible to distribute the machining allowance for the single and whole parts for adaptive machining of complex parts.

• Asian Journal of Innovation and Policy
• /
• 제7권1호
• /
• pp.207-234
• /
• 2018

A manufacturer of a durable good typically purchases supplies, including parts for assembly - that are also useful for repairs - from independent "original equipment suppliers" with which it contracts. The manufacturer is a branded monopolist of its final assembled product. To put into effect also a monopoly of the replacement parts, it must stipulate in its arrangements with independent suppliers of the parts that they not supply such patented parts to any other buyer. Durable good owners would then only be able to obtain their requirements of replacement parts from the same company that supplied the durable. This would amount to a tie-in of replacement parts to the direct purchase of new durables. And that describes the apparently widespread practice of automobile manufacturers in India, as exposed in a recent case before the Competition Commission of India (Samsher Kataria v Honda Siel Cars India Limited and others). Here, I will argue that such tie-in enabled automotive manufacturers to more fully appropriate consumer surplus, which induced them to lower the price of new cars, sell more cars and also sell more repair parts. The tie-in expanded the auto parts industry and promoted new entry. The main restraint on expansion of India's automotive manufacturing is not monopoly. It is government protection in the form of tariffs on automobiles and auto parts.

• 복식
• /
• 제56권9호
• /
• pp.24-36
• /
• 2006

The consumption became a virtue of social in 20th century, and this consumption culture created an ideal body image through mass media. Sexual image became a new standard of 'beauty' in a modern fashion, and designs which expressed sexual image appear every season. Individuals were fascinated with some parts of human body. These body parts are different based on the time period and the culture that the individual belonged to. This study focused on the erotic body parts and expression on the editorial fashion photography. Eroticism represented in the editorial fashion photographs can be divided into the expression by clothing design and by creating erotic atmospheres. Erotic expressions by clothing design can be presented by 1)exposing directly 2)exposing indirectly 3)emphasizing the body parts. The most frequently presented erotic body parts in fashion photographs were legs(25%), followed by the bodice with breast (21%), the waist (16%), the hip (12%), neck & shoulder (10%), arms (9%), and abdomen (7%). The results indicated that legs were considered to be a erotic body parts often than the traditionally referred erotic body parts, such as bodice with breast or hip. While direct exposing method (e.g., adhesion, see-though) was frequently used for other body parts.

• 대한영양사협회학술지
• /
• 제19권4호
• /
• pp.389-399
• /
• 2013

This study compared the nutritional composition and antioxidative activity of different parts of Taraxacum coreanum (aerial parts and roots) according to different drying methods (natural drying and freeze-drying). There were no significant differences in vitamin C content in roots depending on the drying methods. However, vitamin A (P<0.01), E (P<0.001) and C (P<0.001) content of aerial parts, and vitamin A (P<0.001) and E (P<0.05) content of roots were significantly higher after freeze-drying compared to natural drying. For organic acids, the oxalic acid content of the aerial parts and roots were the highest. The total polyphenol and total flavonoid content in extracts from the aerial parts (P<0.01) and roots (P<0.05) were significantly higher after freeze-drying compared to natural drying. In addition, the total polyphenol and flavonoid content, DPPH radical scavenging activity, and antioxidative index from the natural drying and freeze-drying of Taraxacum coreanum extracts were significantly higher in the aerial parts compared to the roots (P<0.05). These results suggest that the nutritional composition and antioxidative activity of Taraxacum coreanum are higher in the aerial parts compared to the roots, and higher after freeze-drying compared to natural drying. Therefore, the aerial parts of Taraxacum coreanum could be suggested as an antioxidative functional food source.