• Communications for Statistical Applications and Methods
• /
• 제16권3호
• /
• pp.463-477
• /
• 2009

극단치 분포의 모수 추정방법으로 최우추정법, 확률가중적률법, 회귀분석법은 기존 연구에서 활발하게 적용되어져 왔다. 그러나 이들 세 가지 추정방법 가운데, 회귀분석법의 우수성은 엄격하게 평가되어진 적이 없다. 본 논문에서는 몬테칼로 시뮬레이션을 통하여 Generalized Extreme Value(GEV) 분포와 Generalized Pareto(GP) 분포의 모수 추정에 회귀분석법 및 다른 추정방법을 적용하여 비교 연구한다. 시뮬레이션 결과, 표본의 크기가 작은 경우 회귀분석 법은 GEV 분포의 위치모수 추정시 편의 측면과 효율성 측면에서 다른 방법보다 우수한 경향을 나타내었다. GP 분포의 규모모수 추정시에는 표본의 크기 가 작을 경우 회귀분석법이 다른 방법보다 작은 편의를 나타내었다. 회귀분석법은 표본의 크기 가 작거나 적당히 큰 경우에도 GEV 분포나 GP 분포의 형태모수 추정시에 형태모수의 값이 -0.4일 경우, 다른 방법보다 우수한 경향을 나타내었다.

• Communications for Statistical Applications and Methods
• /
• 제12권2호
• /
• pp.285-294
• /
• 2005

This paper deals with the comparison of parameter estimation methods in a 3-parameter Kappa distribution which is sometimes used in flood frequency analysis. Method of moment estimation(MME), L-moment estimation(L-ME), and maximum likelihood estimation(MLE) are applied to estimate three parameters. The performance of these methods are compared by Monte-carlo simulations. Especially for computing MME and L-ME, three dimensional nonlinear equations are simplified to one dimensional equation which is calculated by the Newton-Raphson iteration under constraint. Based on the criterion of the mean squared error, L-ME (or MME) is recommended to use for small sample size( n$\le$100) while MLE is good for large sample size.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.314-317
• /
• 1993

In this paper, the IPE(Iterative Parameter Estimation) methods for the nonlinear measurements are proposed. The IPE methods convert the problems of the parameter estimation for the nonlinear measurements to that of the solution of the nonlinear equations approximately and use several iterative numerical solutions, such as fixed points theory, Newton's methods, quasi-Newton's methods and steepest descent techniques. the IPE methods for the nonlinear measurements-in the case of the error estimation for the inertial navigation systems are simulated, and it is found that the estimation errors for the nonlinear measurements decrease rapidly and converge to almost that of the linear LSE(Least Squares Estimation) when the IPE methods are applied.

• 품질경영학회지
• /
• 제46권1호
• /
• pp.39-74
• /
• 2018

Purpose: For more than 30 years, robust parameter design (RPD), which attempts to minimize the process bias (i.e., deviation between the mean and the target) and its variability simultaneously, has received consistent attention from researchers in academia and industry. Based on Taguchi's philosophy, a number of RPD methodologies have been developed to improve the quality of products and processes. The primary purpose of this paper is to review and discuss existing RPD methodologies in terms of the three sequential RPD procedures of experimental design, parameter estimation, and optimization. Methods: This literature study composes three review aspects including experimental design, estimation modeling, and optimization methods. Results: To analyze the benefits and weaknesses of conventional RPD methods and investigate the requirements of future research, we first analyze a variety of experimental formats associated with input control and noise factors, output responses and replication, and estimation approaches. Secondly, existing estimation methods are categorized according to their implementation of least-squares, maximum likelihood estimation, generalized linear models, Bayesian techniques, or the response surface methodology. Thirdly, optimization models for single and multiple responses problems are analyzed within their historical and functional framework. Conclusion: This study identifies the current RPD foundations and unresolved problems, including ample discussion of further directions of study.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2006년도 PROCEEDINGS OF JOINT CONFERENCEOF KDISS AND KDAS
• /
• pp.163-169
• /
• 2006

This paper deals with the comparison of parameter estimation methods in a 3-parameter Kappa distribution which is sometimes used in flood frequency analysis. The method of moment estimation(MME), L-moment estimation(L-ME), and maximum likelihood estimation(MLE) are applied to estimate three parameters. The performance of these methods are compared by Monte-carlo simulations. Especially for computing MME and L-ME, ike dimensional nonlinear equations are simplied to one dimensional equation which is calculated by the Newton-Raphson iteration under constraint. Based on the criterion of the mean squared error, the L-ME is recommended to use for small sample size $(n\leq100)$ while MLE is good for large sample size.

• Journal of Electrical Engineering and Technology
• /
• 제3권4호
• /
• pp.451-459
• /
• 2008

Accurate load modeling is essential for power system static and dynamic analysis. By the nature of the problem of parameter estimation for power system load modeling using actual measurements, multiple local optimal solutions may exist and local methods can be trapped in a local optimal solution giving possibly poor performance. In this paper, Trust-Tech, a novel methodology for global optimization, is applied to tackle the multiple local optimal solutions issue in measurement-based power system load modeling. Multiple sets of parameter values of a composite load model are obtained using Trust-Tech in a deterministic manner. Numerical studies indicate that Trust-Tech along with conventional local methods can be successfully applied to power system load model parameter estimation in measurement-based approaches.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.163-175
• /
• 1996

This paper invetigates estimation methods of mapping parameters in object-oriented coding. In this paper, we propose a fast parameter estimation method with its performance similar to that of the conventional methods. We employ hierarchical structure in difference images to redcue the computational complexity and also combine conventional six- and eight-mapping parameter estimation methods to compensate for the performance degradation caused by employment of hierarchical structure. Computer simulation shows that the proposed mehtod gives results similar to conventional methods with greatly reduced computational complexity.

• 한국임상약학회지
• /
• 제23권2호
• /
• pp.137-141
• /
• 2013

Purpose: This study compared the performance of new NONMEM estimation methods using a population analysis dataset collected from a clinical study that consisted of 40 individuals and 567 observations after a single oral dose of glimepiride. Method: The NONMEM 7.2 estimation methods tested were first-order conditional estimation with interaction (FOCEI), importance sampling (IMP), importance sampling assisted by mode a posteriori (IMPMAP), iterative two stage (ITS), stochastic approximation expectation-maximization (SAEM), and Markov chain Monte Carlo Bayesian (BAYES) using a two-compartment open model. Results: The parameters estimated by IMP, IMPMAP, ITS, SAEM, and BAYES were similar to those estimated using FOCEI, and the objective function value (OFV) for diagnosing the model criteria was significantly decreased in FOCEI, IMPMAP, SAEM, and BAYES in comparison with IMP. Parameter precision in terms of the estimated standard error was estimated precisely with FOCEI, IMP, IMPMAP, and BAYES. The run time for the model analysis was shortest with BAYES. Conclusion: In conclusion, the new estimation methods in NONMEM 7.2 performed similarly in terms of parameter estimation, but the results in terms of parameter precision and model run times using BAYES were most suitable for analyzing this dataset.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권1호
• /
• pp.17-33
• /
• 2001

The characteristics of Weibull distribution are investigated as a function of shape parameter. The statistical estimation methods of the shape parameter and statistical comparison methods of two or more shape parameters are studied. Assuming Weibull distribution, statistical analysis of bending-strength data of alumina titanium carbide ceramic matrix composites machined two different methods are performed.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.302-307
• /
• 2006

The purpose of this paper is to develop an improved three-phase transformer model for ATP and parameter estimation methods that can efficiently utilize the limited available information such as factory test reports. In this paper, improved topologically-correct duality-based models are developed for three-phase autotransformers having shell-form cores. The problem in the implementation of detailed models is the lack of complete and reliable data. Therefore, parameter estimation methods are developed to determine the parameters of a given model in cases where available information is incomplete. The transformer nameplate data is required and relative physical dimensions of the core are estimated. The models include a separate representation of each segment of the core, including hysteresis of the core, ${\lambda}-i$ saturation characteristic and core loss.