• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.211-220
• /
• 2012

Coarse granular materials such as gravel, rubble is used as major fill materials in earth structures of railway, road and dam. Therefore, it is essential to accurately evaluate properties of these materials for reasonable design and construction. In the precedent study, we built large triaxial testing system and verified system compliance with a focus on the dynamic properties. And we could secured the reliability of the system. In this study, the cyclic triaxial tests were performed in various experimental conditions on coarse granular material. Two series of parallel graded samples are prepared by mixing crushed rock. The influence of grain size, loading pattern, loading frequency, and fine contents were analyzed and discussed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.3
• /
• pp.39-52
• /
• 2009

Scale Invariant Feature Transform (SIFT) is an effective algorithm in object recognition, panorama stitching, and image matching, however, due to its complexity, real time processing is difficult to achieve with software approaches. This paper proposes using a reconfigurable hardware processor with integer half kernel. The integer half kernel Gaussian reduces the Gaussian pyramid complexity in about half [] and the reconfigurable processor carries out a parallel implementation of a full search Fast SIFT algorithm. We use a low memory, fine grain single instruction stream multiple data stream (SIMD) pixel processor that is currently being developed. This implementation fully exposes the available parallelism of the SIFT algorithm process and exploits the processing and I/O capabilities of the processor which results in a system that can perform real time image and video compression. We apply this novel implementation to images and measure the effectiveness. Experimental simulation results indicate that the proposed implementation is capable of real time applications.

• Transactions of Materials Processing
• /
• v.19 no.7
• /
• pp.416-422
• /
• 2010

The $\{10\bar{1}2\}$ twinning characteristics, such as active twin variants, volume fraction of twins with strain, twin morphology, twin texture and angle relationship between twins, were dependent on the activation mode (i.e., tension parallel to the caxis or compression perpendicular to the c-axis). The selection criterion of active twin variants was governed by the Schmid law. This activation of selected twin variants depending on the activation mode consequently caused a totally different plastic deformation behavior in two activation modes. The differences in the deformation characteristics, such as flow stress and work hardening rate, between both activation modes were explained in relation with activation stresses for slips and twinning, relative activities of twinning and slips during plastic deformation, grain refining effect by twin boundaries (Hall-Petch effect), and twinning-induced change in activities of slips.

• Journal of the Korea Furniture Society
• /
• v.16 no.2 s.30
• /
• pp.77-83
• /
• 2005

The specific gravity of wood treated with the essential oil penetration was higher than that of untreated wood. However, in case of oven-dried wood the difference of treated and untreated products decreased, compared with air-dried wood. The shrinkage of treated wood showed no consistent trend and the difference was trivial. In addition, similar trend was shown in each direction. Compression strength parallel to grain of treated wood was somewhat higher than that of untreated wood and the difference was trivial. The difference in static bending strength was slight and showed no consistent trend. The stage of check for Pinus koraiensis and Populus tomentiglandulosa and Alnus hirsuta was 2 stage and 3 stage, respectively. Deformation stage with no relation to the essential oil treatment was 1 stage for Pinus koraiensis, 2 stage Populus tomentiglandulosa and 3 stage for Ainus hirsuta, respectively, and there was no difference in essential oil penetration.

• Journal of the Korean Ceramic Society
• /
• v.53 no.2
• /
• pp.150-161
• /
• 2016

The conventional brick-layer model is not satisfactory either in theory or in practice for the description of dispersive responses of polycrystalline solid electrolytes with current-constriction effects at the grain boundaries. Parallel networks of complex dielectric functions have been shown to successfully describe the AC responses of polycrystalline sodium conductors over a wide temperature and frequency range using only around ten model parameters of well-defined physical significance. The approach can be generally applied to many solid electrolyte systems. The present work illustrates the approach by simulation. Problems of bricklayer model analysis are demonstrated by fitting analysis of the simulated data under experimental conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.200-202
• /
• 2004

ZnO thin films were grown at different plume-substrate angles by pulsed laser deposition(PLD). From the X-ray diffraction(XRD) result, all ZnO thin films were found to be well c-axis oriented and c-axis lattice constant approached the value of bulk ZnO as plume-substrate(P-S) angle decreased. The grain size of ZnO thin films measured by atomic force microscopy increased and the UV intensity of ZnO thin films investigated by photoluminescence increased as P-S angle decreased. It is found that the improvement of structural and optical properties mainly comes from the reduction of the flux of ablated species arriving on a substrate per a laser shot by tilting a substrate parallel to the plume propagation direction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.5
• /
• pp.359-363
• /
• 2011

To integrate the sensor driver and logic circuits, fabricating down scaled transistors has been main issue. At this research, short channel effects were analyzed after n channel polycrystalline silicon thin film transistor was fabricated at high temperature. As a result, on current, on/off current ratio and transconductance were increased but threshold voltage, electron mobility and s-slope were reduced with a decrease of channel length. When carriers that develop at grain boundary in activated polycrystalline silicon have no gate biased, on current was increased with punch through by drain current. Also, due to BJT effect (parallel bipolar effect) that developed under region of channel by increase of gate voltage on current was rapidly increased.

• Korean Journal of Agricultural Science
• /
• v.37 no.3
• /
• pp.465-469
• /
• 2010

In order to develop effective recycling technologies of disused railway wood ties, wood properties and residual creosote oil of wood ties were investigated. Among the total 50 wood ties, 32 wood ties were identified as tropical hardwood tree, such as, Keruing (Dipterocarpus spp.), Kempas (Koompassia malaccensis), Kapur (Dryobalanops spp.) Naytoh (Palaquium rostratum), and so on. Disused wood ties showed mostly sound structure without degradation of cell walls by decay fungi. Disused wood ties showed high strengths of bending and compressive parallel to grain because degradation of wood properties was hardly occurred in use under exterior condition. Disused railway wood ties had relatively poor depth of penetration and residual of creosote oil because of refractory wood structures. These results suggest that disused railway wood ties may be useful as recycling wood wastes.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.218-221
• /
• 1999

Magnetization measurements have been carried out on grain aligned Hg-1223 with the applied field parallel to the c-axis. The temperature dependence of the lower critical field H$_{cl}$(T) was determined by considering the effect of the surface barrier on the magnetization. H$_{cl}$(T) have been determined .from magnetic hysteresis loops within the framework of the modified Kim-Anderson critical-state model, where the surface barrier and the lower critical field are explicitly considered. At high temperature, H$_{cl}$(T) is identified as H$_p$(T). This results are agreed with the theory of Bean-Livinston surface barriers.

• Journal of the Korean Society of Costume
• /
• v.56 no.4 s.103
• /
• pp.48-64
• /
• 2006

The purpose of the study was to demonstrate how to recreate spencer jacket in the empire style in an attempt to apply this historic style to theatrical costumes and other high fashion items in modern times. The study was carried out through 2 steps. (1)Block patterns of spencer jacket of its basic design were developed through draping based on the design characteristics mentioned above. (2)Spencer jackets of three designs, which were the typical designs of each category have been made of velvet to find out more specific structural characteristics. The structural characteristics of Spencer jacket in draping were as follows: (1)Jacket length position was suitable 9cm below body's bust line and neckline should be enlarged front & side neck point 2cm, back neck point 1.5cm. (2)Cut out the front bodice after CF line moved 1cm outwards and bust dart amount should not exceed 2-3cm. Shoulder point moved inwards. (3)Side back grain line was parallel to princess line of the back bodice. Add 0.5cm ease to the under arm of the front and side bark bodice, it was good for the activity of arm. (4)Armhole line was trued as maintaining to across back width 14-15cm at least. Shoulder line was to connect from the point 2cm depart shoulder point along armhole line to point 2cm side neck point along neck line. (5)Sleeve length was suitable 70cm, cut out the bias direction to move forwards the grain line from shoulder point. Puff position was good from the 2cm depart shoulder point to shoulder line.