• Journal of the Korean Wood Science and Technology
• /
• 제41권2호
• /
• pp.100-104
• /
• 2013

Bearing occurs by the rotations of members induced from horizontal or vertical load at traditional wooden joint in frame. The bearing between wooden members is not occurring at the whole surface of joint, but occurring only at the particular bearing area. In this study, partial bearing according to the different grain direction was evaluated. The partial compressive strength showed 3 times higher than pure compressive strength perpendicular to grain, 1.5 times higher than parallel to grain and 3.3 times higher than both of them. It is expected that this result can be very importantly applied when evaluating and analyzing the actual behavior of traditional wooden mortise and tenon joint.

• Journal of Information Processing Systems
• /
• 제8권2호
• /
• pp.331-346
• /
• 2012

Task-based programming is becoming the state-of-the-art method of choice for extracting the desired performance from multi-core chips. It expresses a program in terms of lightweight logical tasks rather than heavyweight threads. Intel Threading Building Blocks (TBB) is a task-based parallel programming paradigm for multi-core processors. The performance gain of this paradigm depends to a great extent on the efficiency of its parallel constructs. The parallel overheads incurred by parallel constructs determine the ability for creating large-scale parallel programs, especially in the case of fine-grain parallelism. This paper presents a study of TBB parallelization overheads. For this purpose, a TBB micro-benchmarks suite called TBBench has been developed. We use TBBench to evaluate the parallelization overheads of TBB on different multi-core machines and different compilers. We report in detail in this paper on the relative overheads and analyze the running results.

• Structural Engineering and Mechanics
• /
• 제5권5호
• /
• pp.635-644
• /
• 1997

The paper reviews the implementation and evaluation of exact methods for the computation of transcendental structural eigenvalues, i.e., critical buckling loads and natural frequencies of undamped vibration, on multiple instruction, multiple data parallel computers with distributed memory. Coarse, medium and fine grain parallel methods are described with illustrative examples. The methods are compared and combined into hybrid methods whose performance can be predicted from that of the component methods individually. An indication is given of how performance indicators can be presented in a generic form rather than being specific to one particular parallel computer. Current extensions to permit parallel optimum design of structures are outlined.

• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.12-17
• /
• 1996

This study was carried out to investigate some mechanical properties for wood rational utilization of heartwood and sapwood in radiata pine according to basic density, ring width and proportion of latewood which were grown in New Zealand. This result were summarized as follow: Heartwood showed 35.78(MPa) of the compression strength parallel to the grain while sapwood showed 42.08(MPa). The modulus of rupture in static bending was higher in sapwood showing 86.12(MPa) than in heartwood 72.99(MPa) Heartwood had 7.38(GPa) for the modulus of elasticity in static bending and sapwood 8.17(GPa). As the basic density and proportion of latewood increased: compression strength parallel to the grain, MOR and MOE in static bending had a tendency to increase. As ring width increased, the mechanical properties decreased.

• Journal of the Korean Wood Science and Technology
• /
• 제50권1호
• /
• pp.1-11
• /
• 2022

To evaluate the bearing strength of red pine cross-laminated timber (CLT) with self-tapping screw (STS), which is widely used as a fastener for connection in CLT building, the bearing test was conducted. Accoring to the STS's diameters (8, 10, 12 mm), the bearing test specimens with half hole were manufactured. Bearing strength was compared and reviewed in consideration of the configuration in STS and the loading direction to the grain of red pine. As a result of the bearing test on the STS's diameter, the yield bearing load increases as the larger diameter of the STS in all directions of the red pine. The bearing strength of the thread part (thread + tip) was higher than the shank part (shank + shank cutter). In compared with the directions to the grain of red pine, the bearing strength of the cross section parallel to the loading direction was the highest, and the tangent section was the lowest bearing strength. The average bearing strength of the loading direction in parallel to the grain was 23.43 MPa, which was about 45% higher than the average 16.16 MPa in perpendicular to the grain. The predicted bearing strength calculated by Eurocode (EN) and Korean Building Code (KBC)'s equation was lower than the experimental value. It is nessesary to propose the new equations of bearing strength reflected the configuration information of STS.

• 암석학회지
• /
• 제13권3호
• /
• pp.133-141
• /
• 2004

포천지역의 쥬라기 화강암내 결의 특성을 규명하였다 3가지 미세균열의 분포상은 박편의 확대사진(x6.7)에서 잘 나타난다. 우세균열 면은 1번 결의 면에 평행하며, 준 우세균열 면은 2번 결의 면에 평행하다. 이러한 1번 결 및 2번 결을 형성하는 미세균열은 3번 결의 면상에서 상호 거의 수직을 이룬다. 따라서, 연구지역의 화강암질암의 결은 미세균열의 선택적 배향성에 지배된다고 할 수가 있다. 결은 리프트, 그레인, 하드웨어 면의 순으로 발생빈도, 길이 및 밀도가 발달하고 있다.

• Journal of Electrical Engineering and information Science
• /
• 제1권1호
• /
• pp.118-128
• /
• 1996

In safety critical hard real-time systems, a timing fault may yield catastrophic results. In order to eliminate the timing faults from the fast responsive real-time control systems, it is necessary to schedule a code based on high precision timing analysis. Further, the schedulability enhancement by having multiple processors is of wide spread interest. However, although an instruction level parallel processing is quite effective to improve the schedulability of such a system, none of the real-time applications employ instruction level parallel scheduling techniques because most of the real-time scheduling models have not been designed for fine-grain execution. In this paper, we present a timing constraint model specifying high precision timing constraints, and a practical approach for constructing static schedules for a VLIW execution model. The new model and analysis can guarantee timing accuracy to within a single machine clock cycle.

• 대한산업공학회지
• /
• 제24권4호
• /
• pp.591-600
• /
• 1998

The scheduling of parallel computing systems consists of two procedures, the assignment of tasks to each available processor and the ordering of tasks in each processor. The assignment procedure is same with a clustering. The clustering is classified into linear or nonlinear according to the precedence relationship of the tasks in each cluster. The parallel computing system can be modeled with a Directed Acyclic Graph(DAG). By the granularity theory, DAG is categorized into Coarse Grain Type(CDAG) and Fine Grain Type(FDAG). We suggest the linear clustering method for the scheduling of CDAG using the genetic algorithm. The method utilizes a properly that the optimal schedule of a CDAG is one of linear clustering. We present the computational comparisons between the suggested method for CDAG and an existing method for the general DAG including CDAG and FDAG.

• Journal of the Korean Wood Science and Technology
• /
• 제52권2호
• /
• pp.157-174
• /
• 2024

This study investigates the influence of varying concentrations of boric acid (BA) preservative on the physical and mechanical properties of light red meranti (LRM) found in Sarawak. LRM or Shorea leprosula samples were treated with various concentrations of BA via the dip diffusion method using American Society for Testing and Materials (ASTM) standards. The physical property, particularly the retention rate and mechanical properties, bending strength, modulus of elasticity (MOE), tensile and compression strength parallel to grain of impregnated and control samples were tested to determine the effects of BA preservative. The retention rate was found to increase with increasing BA concentration and higher surface area to volume ratio. The mechanical properties in terms of the MOE and tensile strength parallel to grain were found to be greater than those of the control samples, whereas the bending strength and tensile strength parallel to grain were lower. Amongst the results, only the retention rate and MOE showed significant interaction effects at 5% level of significance between all factors tested (samples size and BA concentration for retention rate and BA concentration for MOE).

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.385-392
• /
• 2014

우리나라의 중요한 조림 수종 중에서 낙엽송을 대상으로 하여, 간벌실시에 따른 물리 역학적 성질을 비교 평가함으로써 간벌 실시가 목재의 재질에 미치는 영향과 양질재 생산 및 목재의 효율적 이용을 위한 연구결과는 다음과 같다. 간벌정도에 따른 시료는 무간벌, 약도간벌, 강도간벌을 실시한 광릉시험림에서 벌채하여 사용하였다. 간벌 정도에 따른 평균 만재율은 무간벌 < 약도간벌 < 강도간벌의 경향이었고 평균 연륜폭은 무간벌 < 약도간벌 또는 강도간벌의 경향이었다. 간벌 정도에 따른 평균 휨강도는 무간벌 > 약도간벌 >강도간벌의 경향이었고 간벌 정도에 따른 평균 압축강도는 무간벌 > 약도간벌 >강도간벌의 경향이었다. 이러한 결과로 낙엽송은 간벌에 의하여 휨 및 종압축강도가 감소하는 경향이었다.