• The Korean Journal of Food And Nutrition
• /
• v.9 no.3
• /
• pp.325-330
• /
• 1996

Foaming capacity (FC) and stability (FS) of protein recovered from red crab (Chitinonecetes opilio) processing in water and soybean protein isolate were determined at pH 2.0~10.0 in water and NaCl solution. The FC values for both proteins showed the lowest values at the isoelectric point (pH 4.0) and increased nth an increase in pH above the isoelectric point. FC of RCP was higher than that of SPI at pH 10.0 in water and both NaCl solutions. FC of SPI increased with an increase in NaCl concentration at pH 4.0 and 6.0, but FC of RCP was not affected. The highest FS values for both proteins were obtained at pH 4.0 in water. At pH 2.0, FC of RCP decreased with NaCl concentration increase, but FS increased. NaCl concentration had little effect on FS of RCP at pH 4.0 and 6.0, but the FS decreased at pH 10.0. FS of SPI was similar to that of RCP at pH 2.0 and increased with NaCl concentration Increase from 0.1 to 0.5M NaCl at pH 10.0.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.382-385
• /
• 2003

Chemical mechanical polishing(CMP) is an essential process in the production of copper-based chips. On this work, the stability of Hydrogen Peroxide($H_2O_2$) as oxidizer of Cu CMP slurry has been investigated. $H_2O_2$ is known as the most common oxidizer in Cu CMP slurry. Copper slowly dissolves in $H_2O_2$ solutions and the interaction of $H_2O_2$ with copper surface had been studied in the literature. Because hydrogen peroxide is a weak acid in aqueous solutions, a passivation-type slurry chemistry could be achieved only with pH buffered solution.[1] Moreover, $H_2O_2$ is so unstable that its stabilization is needed using as oxidizer. As adding KOH as pH buffering agent, stability of $H_2O_2$ decreased. However, stability went up with putting in small amount of BTA as film forming agent. There was no difference of $H_2O_2$ stability between KOH and TMAH at same pH. On the other hand, $H_2O_2$ dispersion of TMAH is lower than that of KOH. Furthermore, adding $H_2O_2$ in slurry in advance of bead milling lead to better stability than adding after bead milling. Generally, various solutions of phosphoric acids result in a higher stability. Using Alumina C as abrasive was good at stabilizing for $H_2O_2$; moreover, better stability was gotten by adding $H_3PO_4$.

• Journal of Life Science
• /
• v.23 no.5
• /
• pp.669-675
• /
• 2013

The stability of monascus pigment produced by Monascus sp. MK2 was investigated according to light, pH, temperature, organic acid, synthetic antioxidant, and natural substance. The light stability was increased (sun light < fluorescent lamp < ultraviolet rays < dark condition) when storing the monascus pigments. Although the monascus pigments were stable in the range of pH 3.0, the degradation rate of pigment was increased at pH 11.0. The stability of monascus pigment gradually decreased as temperature increased. In addition, pigment stability was increased by adding the synthetic antioxidant and natural substance.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.7
• /
• pp.996-1000
• /
• 2016

Effects of copigments (succinic acid, $Cu^{2+}$, ascorbic acid, sucrose, and pH) on stability of anthocyanin extracted from black beans (Glycine max Merrill.) were investigated during storage for 8 days at 4 and $40^{\circ}C$. Succinic acid improved stability of anthocyanin by 7~15% compared to the non-treatment group at $40^{\circ}C$. $Cu^{2+}$ maintained stability of anthocyanin by about 100% for 8 days at $4^{\circ}C$. Ascorbic acid reduced stability of anthocyanin by 64~72% of non-treatment at $40^{\circ}C$. Sucrose treatment did not significantly affect stability compared to the control. The lower pH improved stability of anthocyanin. Stability at pH 1 was improved by 81~87% compared to that at pH 7. These results show that temperature, organic acid, and pH were effective in improving storage stability of anthocyanin from black beans.

• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.331-335
• /
• 1997

The stability of carotenoid pigments extracted from Chrysanthemum petals against pH, sugar, and organic acid was investigated. The contents of total carotenoids in C. boreale and C. morifolium were 3.37mg% and 4.56mg% Per fresh weight, respectively. The elect of pH on the stability of extracted carotenoids showed that the periods reaching 50% of pigment retention were more than 5 to 6 days in pH 4, and the longer periods in pH 6 to 7 in both samples. The addition of sugars such as sucrose, sorbitol, glucose and fructose resulted in the reduction in pigment stability of C. boreale, but C. morifolium was contrast to C. boreale. However, citric acid and ascorbic acid were found to have a protective effect on both carotenoid samples extracted from C. boreale and C. morifolium.

• Journal of Food Hygiene and Safety
• /
• v.12 no.1
• /
• pp.15-19
• /
• 1997

The stability of monascin yellow pigment isolated from Monascus purpureus was determined over a period of storage for the wide range of pH, various metal ions and antioxidants. The absorption maximum of monascin pigment was 385 nm. Monascin pigment was more stable in acid solutions than in alkaline (pH 9 and pH 11) during storage period. It was also observed the reduction of absorption was occur after 3 days storage. The stability of monascin pigment was not changed by adding the various metal ions of the concentration of 10-4 M, however, it was unstable by adding the Zn2+, Al3+ and Fe3+ of 103- M concentration. The antioxidants. BHA, BHT, cysteine and L-ascorbic acid, have no effects on the stability of monascin yellow pigment. Thus, it may be concluded that the monascin pigment is stable and useful food additives as the natural colorant except for the alkaline food and food containing the Zn2+, Al3+ and Fe3+.

• Korean Journal of Mathematics
• /
• v.24 no.2
• /
• pp.297-305
• /
• 2016

In this paper, by using fixed point theorem, we obtain the stability of the following functional equations $$f(pr,qs)+g(ps,qr)={\theta}(p,q,r,s)f(p,q)h(r,s)\\f(pr,qs)+g(ps,qr)={\theta}(p,q,r,s)g(p,q)h(r,s)$$, where G is a commutative semigroup, ${\theta}:G^4{\rightarrow}{\mathbb{R}}_k$ a function and f, g, h are functionals on $G^2$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.12
• /
• pp.1999-2007
• /
• 2020

Objective: This study was aimed to investigate the muscle-specific beef color stability at normal and high ultimate pHs. Methods: The impact of muscle (Longissimus lumborum [LL] vs psoas major [PM]) and pH (normal ultimate pH [Np] vs high pH dark cutting beef [Hp]) on color stability, indicated by basic color traits, metmyoglobin reducing activity (MRA) and oxygen consumption (OC), as well as the lipid oxidation, were determined over 7 days of display at 4℃. Results: Hp-LL had the highest pH (6.92), followed by Hp-PM (6.01), Np-PM (5.76), and Np-LL (5.52). Hp-LL had increased (p<0.05) a^⋆, chroma and % oxymyoglobin during display. Hp-LL also had the highest metmyoglobin (MMb) reducing activity and OC among all the samples, thus, the greatest color stability, although very dark throughout storage, with lowest values for lightness (L^⋆) and yellowness (b^⋆). Np-LL also exhibited relatively high color stability, as a result of its lower % MMb and OC and higher MRA than psoas muscle samples. The 0.2 unit difference of the pH between Hp and Np psoas muscle, resulted in the difference of the color intensity, not the color stability. Interestingly, high pH psoas muscle (Hp-PM) did not have better color stability than Np-PM, and in fact had lower color stability than even Np-LL. The similar level of OC and lipid oxidation cannot explain the difference in color stability between Hp-PM and Np-LL. Conclusion: The Hp does not always show better color stability compared with Np beef, which depends on the muscle type. The balance of MRA and OC is important to keep the color in great intensity and stability in the meantime.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.6
• /
• pp.1022-1027
• /
• 2004

The monacolin K content was determined to investigate the stability of monacolin K from red yeast rice after heating (20∼8$0^{\circ}C$), adjusting the pH (2∼8) by adding 3 N HCl or 3 N NaOH, adding the organic acid (6.0% acetic acid, 0.6% citric acid, 1.5% lactic acid) to pH 4.0 and adding the water (0∼80%). And the monacolin K was isolated from red yeast rice by conducting open column chromatography using neutral aluminum oxide. As a result, the stability of monacolin K decreased with increasing the temperature. The stability for pH was in the order of the unadjusted pH (pH 5.9)>8>4 and pH 2>10. The stability for organic acid was high in the order of lactic acid>citric acid>acetic acid, and the stability of monacolin K under acid was different according to the acid type. The degradation rate of monacolin K increased with increasing the water content. Moreover monacolin K was able to isolate from red and pink pigments as well as the other noncoloric compounds in red yeast rice. The yield of monacolin K was found to be 70%.

• Current Research on Agriculture and Life Sciences
• /
• v.28
• /
• pp.9-15
• /
• 2010

Extraction Efficiency of colorants from sorghum and its storage stability were examined according to the various extracting and storage conditions in this study. The obtained results were as follows ; The absorbance values of extracted colorants were increased with increasing extract time and temperature. The extraction at pH 4 extract was most efficient among the various pH conditions. In the juice extractor system, the amount of extracted colorant was more in distilled water pre-treatment than pH 5, but it was more in pH 5 in the long time pre-treatment above 20 hour. The color of extract solutions changed through variation of the pH. Its color changed from light yellow to heavy yellow finally red ton by pH increasing. The Methionine addition gave an effect on the storage stability of colorant solution and then had better storage stability. And so it delayed the color change up to storge period 18th day and the stabilizing effect was revealed in order of Methionine 10mmol-addition>20mmol-addtion>non-addtion.