• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.225-228
• /
• 2000

In this paper, we demonstrated an analytical description method of forward voltage drop and reverse voltage of $P^{+}N$ junction diode with <111> oriented antimony doped silicon wafer 60keV boron implantation computer simulation results. In order to make electrical activation of implanted carriers, thermal annealing are carried out by RTP method for 1min at $1000^{\circ}C$ inert gas condition.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권6호
• /
• pp.737-743
• /
• 1995

Two step RTD(Rapid Thermal Diffussion) of P into silicon wafer using tungsten halogen lamp was used to fabricated very shallow n$^{+}$p junction. 1st RTD was performed in the temperature range of 800.deg. C for 60 see and the heating rate was in the 50.deg. C/sec. Phosphrous solid source was transfered on the silicon surface. 2nd RTD process was performed in the temperature range 1050.deg. C, 10sec. Using 2 step RTD we can obtain a shallow junction 0.13.mu.m in depth. After RTD, the Ti-silicide process was performed by the two step RTA(Rapid Thermal Annealing) to reduced the electric resistance and to improve the n$^{+}$p junction diode. The titanium thickness was 300.angs.. The condition of lst RTA process was 600.deg. C of 30sec and that of 2nd RTA process was varied in the range 700.deg. C, 750.deg. C, 800.deg. C for 10sec-60sec. After 2 step RTA, sheet resistance was 46.ohm../[]. Ti-silicide n+p junction diode was fabricated and I-V characteristics were measured.red.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.195-196
• /
• 2009

This paper describes the fabrication and characteristics of polycrystalline 3C-SiC thin film diodes for extreme environment applications, in which the this thin film was deposited onto oxidized Si wafers by APCVD using HMDS In this work, the optimized growth temperature and HMDS flow rate were $1,100^{\circ}C$ and 8sccm, respectively. A Schottky diode with a Au, Al/poly 3C-SiC/$SiO_2$/Si(n-type) structure was fabricated and its threshold voltage ($V_d$), breakdown voltage, thickness of depletion layer, and doping concentration ($N_D$) values were measured as 0.84V, over 140V, 61nm, and $2.7{\times}10^{19}cm^2$, respectively. To produce good ohmic contact, Al/3C-SiC were annealed at 300, 400, and $500^{\circ}C$ for 30min under a vacuum of $5.0{\times}10^{-6}$Torr. The obtained p-n junction diode fabricated by poly 3C-SiC had similar characteristics to a single 3C-SiC p-n junction diode.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.179-182
• /
• 2007

Polycrystaline (poly) 3C-SiC thin film on n-type and p-type Si were deposited by APCVD using HMDS, $H_2$, and Ar gas at $1180^{\circ}C$ for 3 hour. And then the schottky diode with Au/poly 3C-Sic/Si(n-type) structure was fabricated. Its threshold voltage ($V_d$), breakdown voltage, thickness of depletion layer, and doping concentration ($N_D$) value were measured as 0.84 V, over 140 V, 61nm, and $2.7{\times}10^{19}\;cm^3$, respectively. The p-n junction diode fabricated by poly 3C-SiC was obtained like characteristics of single 3C-SiC p-n junction diode. Therefore, its poly 3C-SiC thin films are suitable MEMS applications in conjuction with Si fabrication technology.

• Transactions on Electrical and Electronic Materials
• /
• 제3권2호
• /
• pp.10-15
• /
• 2002

In this paper, the electrical characteristics of fabricated p+-n junction diode are demonstrated and interpreted with different theoretical calculations. Dopants distribution by boron ion implantation on silicon wafer were simulated with TRIM-code and ICECaEM simulator. In order to make electrical activation of implanted carriers, thermal annealing treatments are carried out by RTP method for 1min. at $1000^{circ}C$ under inert $N_2$ gas condition. In this case, profiles of dopants distribution before and after heat treatments in the substrate are observed from computer simulations. In the I-V characteristics of fabricated diodes, an analytical description method of a new triangular junction model is demonstrated and the results with calculated triangular junction are compared with measured data and theoretical calculated results of abrupt junction. Forward voltage drop with new triangular junction model is lower than the case of abrupt junction model. In the C-V characteristics of diode, the calculated data are compared with the measured data. Another I-V characteristics of diodes are measured after proton implantation in electrical isolation method instead of conventional etching method. From the measured data, the turn-on characteristics after proton implantation is more improved than before proton implantation. Also the C-V characteristics of diode are compared with the measured data before proton implantation. From the results of measured data, reasonable deviations are showed. But the C-V characteristics of diode after proton implantation are deviated greatly from the calculated data because of leakage currents in defect regions and layer shift of depletion by proton implantation.

• 대한전자공학회논문지SD
• /
• 제39권10호
• /
• pp.25-34
• /
• 2002

본 논문에서는 코발트 실리사이드가 형성된 얕은 p+-n과 n+-p 접합의 전류-전압 특성을 분석하여 silicidation에 의해 형성된 Schottky contact 면적을 구하였다. 역방향 바이어스 영역에서는 Poole-Frenkel barrier lowering 효과가 지배적으로 나타나서 Schottky contact 효과를 파악하기가 어려웠다. 그러나 Schottky contact의 형성은 순방향 바이어스 영역에서 n+-p 접합의 전류-전압 (I-V) 동작에 영향을 미치는 것으로 확인되었다. 실리사이드가 형성된 n+-p 다이오드의 누설전류 증가는 실리사이드가 형성될 때 p-substrate또는 depletion area로 코발트가 침투퇴어 Schottky contact을 형성하거나 trap들을 발생시켰기 때문이다. 분석결과 perimeter intensive diode인 경우에는 silicide가 junction area까지 침투하였으며, area intensive junction인 경우에는 silicide가 비록 공핍층이나 p-substrate까지 침투하지는 않았더라도 공핍층 근처까지 침투하여 trap들을 발생시켜 누설전류를 증가시킴을 확인하였다. 반면 p+-n 다이오드의 경우 Schottky contact이발생하지 않았고 따라서 누설전류도 증가하지 않았다. n+-p 다이오드에서 실리사이드에 의해 형성된 Schottky contact 면적은 순방향 바이어스와 역방향 바이어스의 전류 전압특성을 동시에 제시하여 유도할 수 있었고 전체 접합면적의 0.01%보다 작게 분석되었다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.19-23
• /
• 2012

This paper presents a practical methodology for realistic simulation on reverse characteristics of Wide Bandgap (WBG) SiC and GaN p-n junctions. The adjustment on certain physic-based model parameters, such as the trap density and photo-generation for SiC junction, and impact ionization coefficients and critical field for GaN junction are described. The adjusted parameters were used in Synopsys Medici simulation to obtain a realistic p-n junction avalanche breakdown voltage. The simulation results were verified through benchmarking against independent data reported by others.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.908-913
• /
• 2000

CoSi$_2$/p+/n diodes(bilayer diodes) were fabricated by using epitaxial CoSi$_2$grown from Co/Ti bilayer as a diffusion source. The I-V characteristics of p+/n diodes were measured and compared with those of diode made from Co monolayer (monolayer diode). Monolayer diodes showed typical p+n junction characteristics with the leakage current of as low as 10$^{-12}$ A and forward current 6-orders higher than the leakage current, when drive-in annealed at 90$0^{\circ}C$ for 20 sec.. On the other hand, bilayer diodes showed the Schottky-like behaviors with forward currents rather higher than those of monolyer diodes, but with too high leakage currents, when drive-in annealed at $700^{\circ}C$ or higher. However, when the annealing temperature was lowered to $700^{\circ}C$ and annealing time was increased to 60 sec., the leakage current was reduced to 10$^{-11}$ A and thus sho3wed typical diode characteristics. The high leakage currents for diodes annealed at $700^{\circ}C$ or higher was attributed to Shannon contacts formed due to unremoved Co-Ti-Si precipitates. But when annealed at 50$0^{\circ}C$, B ions diffused in the direction of the surface layer, and thus the leakage currents were reduced by removing Shannon contacts.

• 대한전자공학회논문지SD
• /
• 제44권2호
• /
• pp.7-12
• /
• 2007

고휘도 LED(Light-Emitting Diode)를 구현하기 위한 칩 설계의 최적화에 이용할 수 있는 SPICE 기반의 LED 3차원 회로 모델을 개발하였다. 본 모델은 LED를 일정한 면적의 픽셀로 구획하고, 각각의 픽셀은 n-전극, n-형 반도체, p-형 반도체, 및 p-전극 등의 일반적인 LED 레이어 구조를 반영하는 회로망으로 나타낸다. 개별의 박막 층과 접촉 저항은 저항 네트웍으로, pn-접합부는 일반적인 pn-접합 다이오드로 각각 모델링 한다. 별도의 테스트 패턴을 이용하여 독립적으로 추출한 파라미터를 이용한 시뮬레이션 결과는 실험 결과와 정확하게 일치함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.348-349
• /
• 2007

This paper describes the electrical characteristics of polycrystalline (poly) 3C-SiC thin film diodes, in which poly 3C-SiC thin films on n-type and p-type Si wafers, respectively, were deposited by APCVD using HMDS, Hz, and Ar gas at $1180^{\circ}C$ for 3 hr. The schottky diode with Au/poly 3C-SiC/Si(n-type) structure was fabricated. Its threshold voltage ($V_d$), breakdown voltage, thickness of depletion layer, and doping concentration ($N_D$) values were measured as 0.84 V, over 140 V, 61nm, and $2.7\;{\times}\;10^{19}\;cm^3$, respectively. The p-n junction diodes fabricated on the poly 3C-SiC/Si(p-type) were obtained like characteristics of single 3C-SiC p-n junction diodes. Therefore, poly 3C-SiC thin film diodes will be suitable microsensors in conjunction with Si fabrication technology.