• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.651-652
• /
• 2008

This research presents a multi-objective optimal design employing topological approach to maximize magnetic energy while minimizing structural deformation which is caused by magnetic reluctance force and magnetostriction. A design sensitivity formula is derived by employing the adjoint variable method (AVM) to avoid numerous sensitivity evaluations for a coupled magneto-mechanical analysis. The sensitivity analysis is verified using the finite difference method (FDM) in a C-shape actuator. A linear actuator used in a home appliance is examined for optimal design and demonstrates the strength of the proposed topology optimization approach.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.106-112
• /
• 1998

Experience and experiments show that in many cases the buckling limit is reached at a much smaller load level than is predicted by linear buckling analysis. In this paper, it is considered linear and nonlinear of plane vehicle structure and estimates design sensitivity of the cross sectional area that is composed plane vehicle structure and performs optimal design. It compares linear vehicle structure with nonlinear vehicle structure for optima design result that is selected constraint condition of buckling load.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권2호
• /
• pp.56-61
• /
• 2000

In the paper, the system loss sensitivity index that implies the incremental system loss with respect to the change of bus power is derived using optimization technique. The index λ reaches $\infty$ at critical loading point and can be applied to actual power systems for following purposes. 1) Evaluation of system voltage stability 2)Optimal investment of reactive power focused on minimizing system loss and maximizing system voltage stability 3)Optimal re-location of reactive power focused on minimizing system loss and maximizing system voltage stability 4)Optimal load shedding in case of severe system contingency focused on minimizing system loss and maximizing system voltage stability. Case studies for each application have proved their effectiveness.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2883-2893
• /
• 1994

Use of computers in design is a trend in recent years. Mechanism design also uses computers extensively and the concept of optimal mechanism design is developed in many ways. Various authors presented methods based on sensitivity analysis but in these cases, the governing equation of the mechanism has to be derived and calculations become very complicated. In this papers, a method based on the least experimental plan is presented. To make a model of a mechanism, a general purpose mechanism analysis program is used. To obtain an optimal design of a mechanism, the relationship between design variables and the objective function is represented as the nonlinear equation. Optimal design variables are found by solving this derived equation and its result is verified. An example is presented to show the effectiveness of this method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.40-43
• /
• 2000

A process optimal design methodology applicable to steady-state forming with a strain-hardening material is presented. in this approach the optimal design problem is formulated on the basis of a rigid-viscoplastic finite element process model and a derivative based approach is adopted as an optimization technique The process model the schemes for the evaluation of the design sensitivity considering the effect of strain-hardening and an iterative procedure for design optimization are described. the validity of the proposed approach is demonstrated through application to die shape optimal design in extrusion.

• 한국항해학회지
• /
• 제4권1호
• /
• pp.19-30
• /
• 1980

The usual procedure for the optimal design of ship's steering system is to minimize a chosen quadratic performance index, which isdetermined from the view point of economic run. However, the optimal control synthesized in such a straightforward fashion is unsatisfactory because ship's parameters differ from their nominal values due to uncertainties and errors in measurement and/or simplifications in mathematical modelling, and/or the variation of the ship's loading condition. In an attempt to resolve this difficulty, this paper presents a method for designing a low sensitive optimal steering system in a way as to minimize not only given performance index but also the sensitivity of the performance index and trajectory sensitivity. It is also shown that the optimal control so obtained will result in a system whose performance index and transient response are low sensitive to small varation in ship's time constant.

• 한국전산구조공학회논문집
• /
• 제28권4호
• /
• pp.425-431
• /
• 2015

본 논문에서는 균열 진전문제에 대하여 페리다이나믹스 이론을 이용하여 설계민감도 해석 및 구조 최적설계를 수행하였다. 페리다이나믹스는 해의 불연속성을 다루기 어려웠던 기존의 연속체 이론에 비해 균열 진전문제와 같은 불연속성을 가지는 문제를 자연스럽게 표현할 수 있다는 장점을 가지고 있다. 최적설계를 진행하기 위하여 애조인 변수법으로 설계민감도를 유도하였다. 특히 균열이 진전되더라도 애조인 변수법으로 계산된 변위장과 변형에너지에 대한 설계민감도 값은 유한차분법과 비교하여 매우 정확하고 효율적임을 보였다. 이를 바탕으로 간단한 인장응력 하의 균열진전 문제에 대하여 균열의 분기가 발생하는 위치를 조절하기 위하여 정해진 시간구간에서 변형에너지 값을 줄이는 방향으로 최적설계를 수행하였다. 최적의 재료분포로 해석을 수행한 결과 균열의 분기점을 늦출수 있음을 확인하였다.

• Smart Structures and Systems
• /
• 제2권2호
• /
• pp.189-208
• /
• 2006

Monitoring large-scale civil engineering structures such as offshore platforms and high-large buildings requires a large number of sensors of different types. Innovative sensor data information technologies are very extremely important for data transmission, storage and retrieval of large volume sensor data generated from large sensor networks. How to obtain the optimal sensor set and placement is more and more concerned by researchers in vibration-based SHM. In this paper, a method of determining the sensor location which aims to extract the dynamic parameter effectively is presented. The method selects the number and place of sensor being installed on or in structure by through the tolerance domain statistical inference algorithm combined with second order sensitivity technology. The method proposal first finds and determines the sub-set sensors from the theoretic measure point derived from analytical model by the statistical tolerance domain procedure under the principle of modal effective independence. The second step is to judge whether the sorted out measured point set has sensitive to the dynamic change of structure by utilizing second order characteristic value sensitivity analysis. A 76-high-building benchmark mode and an offshore platform structure sensor optimal selection are demonstrated and result shows that the method is available and feasible.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.894-900
• /
• 2000

Optimization of chassis frame is performed according to the minimization of eleven responses representing one total frame weight, three natural frequencies and seven strength limits of chassis frame that are analyzed by using each response surface model from D-optimal design of experiments. After each response surface model is constructed form D-optimal design and random orthogonal array, the main effect and sensitivity analyses are successfully carried out by using this approximated regression model and the optimal solutions are obtained by using a nonlinear programming method. The response surface models and the optimization algorithms are used together to obtain the optimal design of chassis frame. The eleven-polynomial response surface models of the thirteen frame members (design factors) are constructed by using D-optimal Design and the multi-disciplinary design optimization is also performed by applying dual response analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.567-569
• /
• 1992

Design sensitivity analysis is proposed for the optimal shape design of three dimensional magnetostatic problems. The direct differentiation method is introduced for design sensitivity analysis and the boundary element method with reduced magnetic scalar potential as the state variable is used to analyze the magnetic characteristics. In the direct differentiation method, the design sensitivity, defined as the total derivative of the objective function with respect to the design variables, is calculated based on the variation of the state variable with respect to the design variable. And the variation of He state variable is calculated by differentiating the both sides of the system matrix equation obtained by applying boundary element method. Through the numerical example with simple electromagnet, the usefullness is proved.