• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.17-20
• /
• 1999

In these days, wavelength division multiplexing(WDM) all-optical network are being deployed to support various multimedia communication services. In this paper, various WDM all-optical network are discussed, and a design of an all-optical backbone network has been proposed by using multiple self-healing ring technology. The proposed multiple self-healing ring network improves network expandability and efficiency of bandwidth, while it retains simplicity and ease of network control, which are from the nature self-healing ring. Using PDI traffic modeling technique, a well-balanced all-optical backbone network using multiple self-healing ring is designed for the 2010s in Korea.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.3
• /
• pp.342-347
• /
• 1998

An OptiNeural system is developed for optical pattern classification. It is a novel hybrid system which consists of an optical processor and a multilayer neural network. It takes advantages of two dimensional processing capability of an optical processor and nonlinear mapping capability of a neural network. The optical processor with a binary phase only filter is used as a preprocessor for feature extraction and the neural network is used as a decision system through mapping. OptiNeural system is trained for optical pattern classification by use of a simulated annealing algorithm. Its classification performance for grey tone texture patterns is excellent, while a conventional optical system shows poor classification performance.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2492-2494
• /
• 1998

Recently the optical fiber lines have been widely deployed in the trunk lines and digital data service network. The unexpected failures of optical fiber lines by natural disasters and road construction work have increased rear by rear and the number of damaged telecommunication lines per failures is on increasing. In the meantime, it takes long time to recover the optical fiber lines failures. So, it is important to maintain and monitor the status of optical fiber lines for prevention of optical fiber lines failures. Therefore, KT(Korea Telecom) needs efficient and automatic maintenance system to operate and monitor the optical fiber lines. FLOMS(Fiber Line Operation and Monitor System) had been developed in '96 and pilot system was installed at telephone offices in '97. This paper describes the FLOMS which carries out the functions of efficient maintenance and supports for monitoring optical fiber lines and managing facilities in optical fiber lines.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.351-356
• /
• 2015

Visible light communication (VLC) is considered to be an attractive scheme to realize the broadband wireless communication for an indoor environment. We present a room division multiplexing (RDM) mechanism for an indoor multi-room VLC network, which utilizes the spatial position of the LED lamp in different rooms as a novel dimension of network resource for multiplexing, and thus the network capacity is increased. In such a network, the service interruption caused by user cross-room movement is an important problem, and we propose a double-area-positioning based cross-room switch solution. An experimental platform demonstrates the RDM-deployed VLC network, and validates the performance of the presented switch mechanism.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2464-2466
• /
• 1998

A switch is a component with two or more ports that selectively transmits, redirects, or blocks optical power in a fiber transmission line. Our switch uses rotation mechanism using stepping motor, hence the common optical fiber can scan and allign to one of the arrayed N optical fibers to provide optical path by electronic precise control. The developed switch is consisted of switching module and its control module. The performance parameters of a switching loss and a repeatability are considered very important. We performed the study to reduce the switching loss and improve the repeatability of switch. The switch can be widely used as a test instrument of optical device and of optical cable in factory, also of optical cable monitoring systems.

• Journal of the Optical Society of Korea
• /
• v.20 no.3
• /
• pp.335-342
• /
• 2016

We demonstrate an optical asynchronous transfer mode/wavelength division multiplexing (OATM/WDM) optical access network, using a router based on an optical header decoder to conduct next-generation communications. The router consists of a decoder or hardware analysis processing of the header bit and switches. The router in the OATM/WDM optical access network is a key technology by which to satisfy subscribers’ requests, including reliability, cost efficiency, high speed, large-capacity transmission, and elevated information security. In this study, we carry out experiments in which a header decoder delivers to 16 and 32 subscribers with a single wavelength in the router. These experiments confirm the decoder’s successful operation via hardware using 4 and 5 header bits. We propose that this system may significantly contribute toward the realization of an optical access network that provides high-quality service to subscribers of next-generation communications.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.666-671
• /
• 2000

With the current advances in optical WDM (Wavelength Division Multiplexing) networking technologies and the increasing demand for network bandwidth the Next Generation Internet is expected to be a network that runs IP(Internet Protocol) directly over WDM-based optical networks. The network control architecture for the IP over WDM networks is different from that of traditional Internet since the underlying WDM devices have more constraints than electronic IP routers such as the lack of optical buffers and wavelength continuity property etc. In this paper we introduce several architectural models for implementing IP over WDM networks and propose an integrated network control framework for the IP over WDM networks. This framework leverages the traffic engineering control architecture for the MPLS (Multi-Protocol Label Switching) networks and is mainly developed for the IP over packet-switched WDM networks. We also report several preliminary simulation results of contention resolution schemes in the packet-switched WDM networks.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.1-6
• /
• 2004

As optical internet network uses WDM links and provides connection-oriented services, the routing and signaling protocols of Internet should be modified to accomodate optical internet network. This paper provides the routing and signaling protocols proper to optical internet network and designs a network architecture that can support autoconfiguration of optical internet network.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.953-954
• /
• 2006

Guaranteeing survivability is the most important issue in designing and operating optical transmission network. For dual system of optical transmission network, there should be two routes of the optical to prepare an error in one cable route. If a route is selected based on the standard of unused optical core when choosing an optical cable, dual optical cable routes could be installed in duplicated line. This paper simulates the installation of duplicated line when designing an optical transmission network, detects the status of duplicated line that could happen during transfer construction and switching and accomplishes a system that can confirm the location based on a map.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.174-175
• /
• 2001

This paper theoretically demonstrates that our proposed method improves the Signal-to-Noise Ratio (SNR) of significantly increase the number of acceptable optical signals in FDMA(SCMA) systems. This method reduced Optical Beat Interference(OBI) by using CDMA.