• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.19-25
• /
• 2015

Nowadays, CAD/CAM is broadly used in dentistry for inlays, crowns, implant abutments and its spectrum is expanding to complete dentures. Utilizing CAD/CAM to fabricate complete dentures is expected to decrease chair time and the number of visits, thus decreasing total fabrication time, expenses and errors caused during fabrication processes. One of the systems using CAD/CAM, DENTCA$^{TM}$ CAD/CAM denture (DENTCA Inc. Los Angeles, USA) scans edentulous impressions, designs dentures digitally, fabricates try-in dentures by 3D printing and converts them into final dentures. Patients can wear final dentures after only 2 - 3 visits with satisfying adaptation. This case report introduces a 71-year-old male patient who visited to consult remaking of existing old dentures. Residual teeth with bad prognosis and root remnants were extracted and the patient used reformed existing mandibular denture for 2 months. And then DENTCA system started. One-step border molding was done using conventional tray of adequate size provided by DENTCA system and wash impression was taken. Gothic arch tracing was completed based on the vertical dimension of existing dentures. Both maxillary and mandibular trays were placed to the resultant centric relation and bite registration was taken. Then DENTCA scanned the bite registration, arranged the teeth, completed the festooning and fabricated the try-in dentures by 3D printing. The try-in dentures were positioned, occlusal plane and occlusal relations were evaluated. The try-in dentures were converted to final dentures. To create bilateral balanced occlusion, occlusal adjustment was done after clinical remounting using facebow transfer. The result was satisfactory and it was confirmed by patient and operator.

• Journal of the Korean earth science society
• /
• v.33 no.2
• /
• pp.126-138
• /
• 2012

Ultrasonic method is widely used for the evaluation of weathering index and of degree of deterioration because it is easily applicable $in$ $situ$. The basic idea of the method is that the ultrasonic velocity decreases as a rock is being weathered. Thus, the difference of ultrasonic velocities between fresh rock and weathered rock indicates the degree of weathering. In this method, the ultrasonic velocity of fresh rock is assumed to be 5,000 m/s. However, this assumption can cause significant errors in estimating weathering index, especially in case that those rocks of the same type have a wide range of ultrasonic velocities such as in Korea. Therefore, we obtained twenty rock specimens and sixty core samples commonly used for stone cultural heritages in Korea, and measured ultrasonic velocities. From the results, we found that the ultrasonic velocities of the same rock type, granite samples range from 3,118 to 5,380 m/s, and that the estimated weathering index can be highly biased if we use the fixed value of 5,000 m/s. We created a database (DB) by combining the measurement data and reported it. We also measured ultrasonic velocities by direct and indirect methods to quantify the calibration coefficient for each sampling site. We found that the calibration coefficients vary widely from site to site (1.31-1.76). Other factors, such as operator bias and temperature did not show any significant effect on errors in ultrasonic velocity measurements. Lastly, we applied our ultrasonic velocity DB and calibration coefficients to a stone cultural heritage, Bonghwang-ri Buddha statue. Our estimation of the weathering index was 0.3, 0.1 smaller than that by conventional method. The degree of deterioration was also different, "moderately weathered", while conventional method gave "highly weathered". Since other independent studies reported that the degree of deterioration of the Buddha statue was "moderately weathered", our estimation seems to be more accurate. Thus our method can help accurately evaluate the weathering index and the conservation planning for a stone cultural heritage.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.159-174
• /
• 2000

Many treatment approaches of Cl III malocclusion have been introduced and the choice of treatment should be a function of the individual problem, not of the clinician(personal preference, experience and success rate of the operator). Therefore a function of the individual problem should be analysed exactly Much has been written in the orthodontic literature concerning the nature of Cl III malocclusion. It has been reported by many investigators that a Cl III malocclusion occurs in a variety of skeletal and dental configurations by differences of race and age. Lateral cephalometric radiographs of 125 individuals were studied for the presence and distibution of four horizontal components and one vortical component in a manner similar to McNamara. The results were as follows : 1. Cl III malocclusion is not a single clinical entity. It can result from numerous combinations of skeletal and dental components. 2. Maxillary skeletal retrusion was the most common single charateristic of the Cl III sample. 3. Only a small percentage of the cases in this study exhibited maxillary dentoalveolar protrusion. 4. Only a small percentage of the cases in this study exhibited mandibular dentoalveolar retrusion. 5. Mandible was usually well-positioned, but a wide variation was observed. 6. A large percentage of the cases in this study exhibited excessive vertical development. Thus, it appears that in designing the ideal treatment regime, those approaches which might restrict vertical development and promote maxillary horizontal growth could be more appropriate in many cases.

• Archives of design research
• /
• v.11 no.2
• /
• pp.129-140
• /
• 1998

This study aimed to grqJe for and present guideline roodel when the qJerator of domestic small manufacturing industry try to introch1ce the first industrial design by easier and more effective method. As the method of study, first of aiL examined the necessary of introducing industrial design throogh coosidering about the role and importance of small business. And next, analysed and examined the result of researching by enquete that is for qJerators of cbnestic small business. As a result, preconditioos for effective introducing industrial design were found. And, based 00 the preconditioos that were found through researching by enquete, examined the approachable introducing methods. Finally, set up the effectivable introducing methods of industrial design for doo1estic small manufacturing industry as a graphical model. As a result of study, First, the operator of small business who try to introduce industrial design needs to be well aware of these six cooditions as a prenise of effective awroach.1) coosciousness of role and versus a nation and a people of own industry Cereative 2) managing coosideratim and examinatim of a necessity of introducing industrial design as a cata1yst 3) A certain understanding aIntt essence and value of industrial design 4) Study and examinatim about a case of sucessful introducing industrial design arxl common introducing method of small business.5) Befarehand examinatim of introducing method making use of professional design organization and consultatim wicket 6) Prodent examination about the appointlrent puprpose, method of designer and infonmtion about designer. Second, as the position of small bnsiness that introduce industrial design fur the first time, it is confirmed that the aroroach going with introducing types - preliminary introducing, partitial introducing, regular introducing, whole industry level introducing - considered necessity rate of introducing industrial design and introducing range at the same time. This method is able to approach step by step, but it is confinmed that there is a characteristic in being able to select the method freely, and understanding easily for being coostructed visual form.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.177-180
• /
• 2010

Purpose: As PET test came to be covered by the pay system of medical insurance (July 1, 2006) and the needs for it becoming increased for laboratory purpose, it became necessary to purchase expensive medical equipments to solve those problems. However, as most of equipments that are operated by cyclotron are very expensive as to amount from tens of millions up to hundreds of millions of won, it is difficult to purchase those equipments from the point of medical organizations. It may be possible to self manufacture those equipments with least costs if their parts functions that meets the operators demands. The Nuclear Medicine department of National Cancer Center (NCC) is trying to manufacture and use equipments that can be made with least costs, including introducing 2 medical equipments that can improves the operator's works. Materials and Methods: Example 1: Self production of radioisotope($^{18}F$) divider was fabricated. The NCC's Nuclear Medicine department acquired one acrylic panel, seven 3-way valve, tubing etc. that can be found in the market to make the main body of divider in cooperation with biomedical engineering, and placed them inside hot cell, and installed switching box outside of hot cell to make it possible to control them from outside. This main body of divider were placed in radioisotope transfer line that are manufactured in the cyclotron. Example 2: Self production of $^{18}F$-FDG automated divider was fabricated. The NCC's Nuclear Medicine department used cavro pump syringe that consists the main body of divider in cooperation with biomedical engineering, biomedical engineering developed programs that divides a certain amount. $^{18}F$-FDG automated divider is placed inside hot cell, and cable chords were used in the equipment, and then it was connected to PC outside hot cell to make it possible to control the $^{18}F$-FDG automated divider. Results: From the NCC's Nuclear Medicine department tests that were carried out from March, 2007 until now, we found out that radioisotope can be sent to radiopharmaceuticals composite module we want, and from the tests that are carried out at NCC's Nuclear Medicine department using $^{18}F$-FDG automated divider since August, 2009 it was possible to distribute radiopharmaceuticals into vial intended. Conclusion: Through the two examples above, we found out that costs can be reduced by self manufacturing expensive equipments from NCC's cyclotron room with least costs. Also, it decreased radiation exposure dose on workers, and set up problem solving processes in cooperation with lots of parties related.

• The Korean Society of Law and Medicine
• /
• v.20 no.3
• /
• pp.143-174
• /
• 2019

Our Constitution obliges the state to protect the health of the people, and the Medical Law, which embodied Constitution, sets out in detail the matters related to open the medical institution, and one of them is to prohibit the operation of multiple medical institutions. By the way, virtually multiple medical institutions could be opened and operated because the Supreme Court had interpreted that several medical institutions could be opened if medical activities were not performed directly at the additional medical institution which was opened under the another doctor's license. However, some health care providers opened the several medical institutions with another doctor's license for the purpose of the maximization of profit, and did illegal medical cares like the unfair luring of patients, over-treatment, and commission treatment. Also, realistic problems such as the infringed health rights have arisen. Accordingly, lawmakers had come to amend the Medical Law to readjust the system of opening for medical institution so that medical personnel could not open or operate more than one medical institution for any reason. For this reason, the Constitutional Court recently declared a constitutional decision through a long period of in-depth deliberation because the constitutional petition and the adjudication on the constitutionality of statutes had been filed on whether Article 33 paragraph 8 of the revised medical law is unconstitutional. The Constitutional Court acknowledged the "justice of purpose" in view of the importance of public medical institutions, of the prevention from seduction of for-profit patients and from over-treatment, and of the fact that health care should not be the object of commercial transactions. Given the risk that medical personnel might be subject to outside capital, the concern that the holder of the medical institution's opening certificate and the actual operator may be separated, the principle that the human body and life should not be just a means, and the current system's inability to identify over-treatment, it also acknowledged the 'minimum infringement'. Furthermore, The Constitutional Court judged it is constitutional in compliance with the principle of restricting fundamental rights, such as 'balance of legal interests'. In this regard, legislative complements are needed in order to effectively prevent the for-profit management and the over-treatment the Constitutional Court is concerned about. In this regard, consumer groups actively support the need for legislation, and health care providers groups also agree on the need for legislation. Therefore, the legislators should respect the recent Constitutional Court's decision and in the near future complete the complementary legislation to reflect the people's interests.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.81-85
• /
• 2009

Purpose: The examination of nuclear medicine observes the change in accordance with the time elapsed in the same region purposed and there are many examinations to acquire the image during the same term. At this time, the same parameter should be applied. The hepatobiliary scan, lung scan etc, are the acquired examination in the divided time with a regular term. Pre-set time that is applied in continued next image is set in order to acquire the fixed counts. The same scan time should be applied for each image. This study will look for the rational plan and analyze the change of scan time in accordance with the time of the decision of scan time at examination that pre-set time is applied. Methods: The hapatobiliary scan that use the radio pharmaceutical $^{99m}Tc$-mebrofenin is choosed as compensation from Jan. 2009 to Mar. 2009 in the department of nuclear medicine in ASAN MEDICAL CENTER. Scan is started after 5 minutes from when 222 MBq (6 mCi) is injected to patient. We let patient stand up between both detectors, and possibly close to the front of detector. When scan time reach 10%, 25%, 50%, 75% of total scan time, we measured the expected total scan time. After finishing all of scan, we compared the total scan time and the expected total scan time, while image is acquiring. and we observed the change of scan time in accordance with radio activity by using phantom. Results: After starting scan, a difference of when scan time reach 10%, 25%, 50%, 75% of total scan time is that the biggest difference is 5 seconds on 10%. There statistically is difference between 25% (t:2.88, p<0.01) and 50% (t:2.05, p<0.01). Conclusions: When the same the scan time is applied in the examination that acquire the many frame, concluding the same scan time has a important effect on a quantitative analysis. Although method that decide the scan time after finish all of the examinations, there is a few problem to apply practical affairs. This may cause an inaccurate result on the examination that need a quantitative analysis. We think that operator should try to improve it. At least, after reach 50% of total scan time, deciding the total scan time mean that you can minimize error of a quantitative analysis caused by unmatched scan time from a gap of image.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.16 no.2
• /
• pp.175-199
• /
• 2005

Family Restaurant is a service business of a kind. The role of service operator is to improve a sales of service goods through maximizing the service value with customer satisfaction at the moment of MOT(moment of truth). Family Restaurant come to the great growth on the face of it. In future, it will place emphasis more and more on not hardware but software including service quality. The purpose of this study, therefore, is to research the effect on service quality of the job satisfaction of Family Restaurant's service staff. Data was collected from the employee who are working at Family Restaurant located in Taegu. The empirical research has been done over 50days from 1April, 2004 to 20May, 2004. In conclusion of empirical analysis, 4 hypotheses were significant among 7 hypotheses suggested in this study. The research showed as follows : First, the organic trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed positive influence on job satisfaction. Second, the personal trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed positive influence on service quality. Third, the official trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed negative influence on job satisfaction. Fourth, the organic trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed positive influence on service quality. Fifth, the personal trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed negative influence on service quality. Sixth, the organic trait among the effect factor of job satisfaction perceived by Family Restaurant service staff showed negative influence on service quality. Seventh, the job satisfaction of Family Restaurant service staff showed positive influence on service quality. Besides, the critical points of this study are as follows; First, we designated the subject of research to the employee of Family Restaurant only. Second, multi-situations(time, holiday) which can happen as service was offered, wasn't concerned. Third, as service quality was estimated by general service quality, the research in future should subdivide service quality more. I, finally, applied the pervious researches on job satisfaction and service quality in the employee of Family Restaurant. To extend more this research model in future, the variables like customer satisfaction should be added.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.65-76
• /
• 1982

This survey was conducted to investigate the status of repair and maintenance of 4 wheel tractor for a basic reference to the improvement of quality and proper utilization of tractors. Thirty two counties from eight provinces, except Jeju, were covered in this study in order to investigate annual break-down and repair of tractor in 1980. The analyzed results are summarized as follows; 1. The average number of break-down of large size tractors(47ps) was 5.0 times in a year and it was about twice of that of small size tractors(19-23ps). The break-down frequency per 100 hours of use was 1.11 times in the large size and 0.65 times in the small size tractors. 2. 75.6 percent of total break-down was occured in main body of tractor and 24.4 percent in attachments. In particular, the break-down of plow and rotavator was more than 80 percent of total break-down of the small size tractor attachments. 3. The large size tractors which were occured more than one times of break-down a year was 75 percent and its rate of the small size tractor was 62 percent. But 9 percent of tractor surveyed had more than ten times of break-down in a year 4. The frequency of break-down had a peak in May, and it was directly proportional to the hours of use. 5. The causes of break-down were poor maintenance and operation by 29.8 precent, old parts by 30.2 percent, poor quality of parts by 20.6 percent, poor field condition by 16.3 percent and others by 3.1 percent. 6. Annual number of repair was 5.5 times and among them 55.6 percent was done by shop and 44.4 percent by operator. 7. Total required repair time was 30.6 hours a year in the large size tractor and 19.9 hours in the small size tractor. Average repair time was 3.62 hours a time. 8. Annual repair cost was 278 thousand won in the large size tractor and 70 thousand won in the small size tractor. The repair cost per hour of use was 621 won in the large size and 198 won in the small size tractor. 9. The repair cost rate of tractor(Y) was regulated with tractor age (X) as follow; Y=0.752X In case of the service life of tractor was 10 years, the total repair cost rate was 64 percent.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1619-1637
• /
• 2000

A review was undertaken to obtain information on the range of beak-trimming methods available or under development. Beak-trimming of commercial layer replacement pullets is a common yet critical management tool that can affect the performance for the life of the flock. The most obvious advantage of beak-trimming is a reduction in cannibalism although the extent of the reduction in cannibalism depends on the strain, season, and type of housing, flock health and other factors. Beak-trimming also improves feed conversion by reducing food wastage. A further advantage of beak-trimming is a reduction in the chronic stress associated with dominance interactions in the flock. Beak-trimming of birds at 7-10 days is favoured by Industry but research over last 10 years has shown that beak-trimming at day-old causes the least stress on birds and efforts are needed to encourage Industry to adopt the practice of beak-trimming birds at day-old. Proper beak-trimming can result in greatly improved layer performance but improper beak-trimming can ruin an other wise good flock of hens. Re-trimming is practiced in most flocks, although there are some flocks that only need one trimming. Given the continuing welfare scrutiny of using a hot blade to cut the beak, attempts have been made to develop more welfare friendly methods of beak-trimming. Despite the developments in design of hot blade beak-trimmers the process has remained largely unchanged. That is, a red-hot blade cuts and cauterises the beak. The variables in the process are blade temperature, cauterisation time, operator ability, severity of trimming, age of trimming, strain of bird and beak length. This method of beak-trimming is still overwhelmingly favoured in Industry and there appears to be no other alternative procedures that are more effective. Sharp secateurs have been used trim the upper beak of both layers and turkeys. Bleeding from the upper mandible ceases shortly after the operation, and despite the regrowth of the beak a reduction of cannibalism has been reported. Very few differences have been noted between behaviour and production of the hot blade and cold blade cut chickens. This method has not been used on a large scale in Industry. There are anecdotal reports of cannibalism outbreaks in birds with regrown beaks. A robotic beak-trimming machine was developed in France, which permitted simultaneous, automated beak-trimming and vaccination of day-old chicks of up to 4,500 chickens per hour. Use of the machine was not successful because if the chicks were not loaded correctly they could drop off the line, receive excessive beak-trimming or very light trimming. Robotic beak-trimming was not effective if there was a variation in the weight or size of chickens. Capsaicin can cause degeneration of sensory nerves in mammals and decreases the rate of beak regrowth by its action on the sensory nerves. Capsaicin is a cheap, non-toxic substance that can be readily applied at the time of less severe beak-trimming. It suffers the disadvantage of causing an extreme burning sensation in operators who come in contact with the substance during its application to the bird. Methods of applying the substance to minimise the risk to operators of coming in contact with capsaicin need to be explored. A method was reported which cuts the beaks with a laser beam in day-old chickens. No details were provided on the type of laser used, or the severity of beak-trimming, but by 16 weeks the beaks of laser trimmed birds resembled the untrimmed beaks, but without the bill tip. Feather pecking and cannibalism during the laying period were highest among the laser trimmed hens. Currently laser machines are available that are transportable and research to investigate the effectiveness of beak-trimming using ablasive and coagulative lasers used in human medicine should be explored. Liquid nitrogen was used to declaw emu toes but was not effective. There was regrowth of the claws and the time and cost involved in the procedure limit the potential of using this process to beak-trim birds.