DOI QR코드

DOI QR Code

The treatment of an edentulous patient with DENTCA$^{TM}$ CAD/CAM Denture

CAD/CAM Denture를 이용한 완전 무치악 환자 수복 증례

  • Park, Joon-Ho (Department of Prosthodontics, School of Dentistry, Dankook University) ;
  • Cho, In-Ho (Department of Prosthodontics, School of Dentistry, Dankook University) ;
  • Shin, Soo-Yeon (Department of Prosthodontics, School of Dentistry, Dankook University) ;
  • Choi, Yu-Sung (Department of Prosthodontics, School of Dentistry, Dankook University)
  • 박준호 (단국대학교 치과대학 치과보철학교실) ;
  • 조인호 (단국대학교 치과대학 치과보철학교실) ;
  • 신수연 (단국대학교 치과대학 치과보철학교실) ;
  • 최유성 (단국대학교 치과대학 치과보철학교실)
  • Received : 2014.09.01
  • Accepted : 2014.09.29
  • Published : 2015.01.30

Abstract

Nowadays, CAD/CAM is broadly used in dentistry for inlays, crowns, implant abutments and its spectrum is expanding to complete dentures. Utilizing CAD/CAM to fabricate complete dentures is expected to decrease chair time and the number of visits, thus decreasing total fabrication time, expenses and errors caused during fabrication processes. One of the systems using CAD/CAM, DENTCA$^{TM}$ CAD/CAM denture (DENTCA Inc. Los Angeles, USA) scans edentulous impressions, designs dentures digitally, fabricates try-in dentures by 3D printing and converts them into final dentures. Patients can wear final dentures after only 2 - 3 visits with satisfying adaptation. This case report introduces a 71-year-old male patient who visited to consult remaking of existing old dentures. Residual teeth with bad prognosis and root remnants were extracted and the patient used reformed existing mandibular denture for 2 months. And then DENTCA system started. One-step border molding was done using conventional tray of adequate size provided by DENTCA system and wash impression was taken. Gothic arch tracing was completed based on the vertical dimension of existing dentures. Both maxillary and mandibular trays were placed to the resultant centric relation and bite registration was taken. Then DENTCA scanned the bite registration, arranged the teeth, completed the festooning and fabricated the try-in dentures by 3D printing. The try-in dentures were positioned, occlusal plane and occlusal relations were evaluated. The try-in dentures were converted to final dentures. To create bilateral balanced occlusion, occlusal adjustment was done after clinical remounting using facebow transfer. The result was satisfactory and it was confirmed by patient and operator.

오늘날 치과 분야에서 CAD/CAM (computer-aided design/computer-aided manufacturing)은 인레이나 크라운, 임플란트 등에 광범위하게 사용되고 있으며 총의치로도 그 영역을 넓히고 있다. CAD/CAM을 이용하여 총의치 제작 시 환자의 chair time과 방문 횟수를 줄일 수 있고 이로 인해 총 제작기간의 단축과 비용절감을 노릴 수 있으며 기공과정의 오차 감소를 기대할 수 있다. 최근 CAD/CAM을 이용한 여러 시스템 중 DENTCA$^{TM}$ CAD/CAM denture (DENTCA Inc. Los Angeles, USA)는 무치악 인상체를 스캔한 후 디지털 상에서 의치를 디자인한 뒤 3D 프린팅을 사용하여 시적의치를 제작해 이를 최종의치로 변환하는 기술을 이용하고 있다. 이로 인해 최적의 경우 2~3번의 내원으로 의치 장착이 가능하며 정확한 의치적합도를 기대할 수 있다. 본 증례의 환자는 71세 남자로, 기존 의치를 장기간 착용하여 재제작 상담을 위해 내원하였으며 예후가 불량한 잔존 치아와 치근을 발거하고 기존 하악의치를 수정하여 2달 간 사용한 뒤, 치료를 시작하였다. DENTCA에서 제공하는 알맞은 크기의 기성 트레이를 선택하여 one-step border molding을 시행한 후, wash impression을 채득하였다. 기존의치의 수직고경을 바탕으로 고딕 아치 트레이싱을 시행한 후 결정된 중심위로 상하악 트레이를 고정하고 교합인기를 시행하였다. DENTCA에서 이를 스캔하여 인공치 배열 및 festooning을 시행하고 3D 프린팅을 이용해 시적의치를 제작하였다. 환자 구강 내에 시적하고 교합평면 및 교합관계를 평가한 뒤 다시 교합인기를 시행하였으며, 이를 바탕으로 최종의치로 변환하였다. 양측성 균형교합을 형성하기 위해 안궁 이전을 이용하여 임상적 재부착 후 교합조정을 시행하였으며 이로 인해 양호한 결과를 얻었기에 보고하는 바이다.

Keywords

References

  1. Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater J 2009;28:44-56. https://doi.org/10.4012/dmj.28.44
  2. Goodacre CJ, Garbacea A, Naylor WP, Daher T, Marchack CB, Lowry J. CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data. J Prosthet Dent 2012;107:34-46. https://doi.org/10.1016/S0022-3913(12)60015-8
  3. Maeda Y, Minoura M, Tsutsumi S, Okada M, Nokubi T. A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures. Int J Prosthodont 1994;7:17-21.
  4. Kawahata N, Ono H, Nishi Y, Hamano T, Nagaoka E. Trial of duplication procedure for complete dentures by CAD/CAM. J Oral Rehabil 1997;24:540-8. https://doi.org/10.1046/j.1365-2842.1997.00522.x
  5. Sun Y, LuP, Wang Y. Study on CAD&RP for removable complete denture. Comput Methods Programs Biomed 2009;93:266-72. https://doi.org/10.1016/j.cmpb.2008.10.003
  6. Inokoshi M, Kanazawa M, Minakuchi S. Evaluation of a complete denture trial method applying rapid prototyping. Dent Mater J 2012;31:40-6. https://doi.org/10.4012/dmj.2011-113
  7. Kattadiyil MT, Goodacre CJ, Baba NZ. CAD/CAM complete dentures: a review of two commercial fabrication systems. J Calif Dent Assoc 2013;41:407-16.
  8. Kanazawa M, Inokoshi M, Minakuchi S, Ohbayashi N. Trial of a CAD/CAM system for fabricating complete dentures. Dent Mater J 2011;30:93-6. https://doi.org/10.4012/dmj.2010-112

Cited by

  1. 3D Printing of Resin Material for Denture Artificial Teeth: Chipping and Indirect Tensile Fracture Resistance vol.11, pp.10, 2018, https://doi.org/10.3390/ma11101798
  2. CAD/CAM system과 전통적인 방법을 이용한 총의치 동시 제작 증례 vol.32, pp.2, 2016, https://doi.org/10.14368/jdras.2016.32.2.141
  3. Color stability of three dimensional-printed denture teeth exposed to various colorants vol.58, pp.1, 2015, https://doi.org/10.4047/jkap.2020.58.1.1
  4. 통상적인 총의치 제작과정에서의 스캔 정보를 활용한 three-dimensional printed complete denture의 제작 vol.36, pp.3, 2015, https://doi.org/10.14368/jdras.2020.36.3.196