• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.174-179
• /
• 2009

To track moving tumor in real time, CyberKnife system imports a technique of the synchrony respiratory tracking system. The fiducial marker which are detectable in X-ray images were demand in CyberKnife Robotic radiosurgery system. It issued as reference markers to locate and track tumor location during patient alignment and treatment delivery. Fiducial marker implantation is an invasive surgical operation that carries a relatively high risk of pneumothorax. Most recently, it was developed a direct lung tumor registration method that does not require the use of fiducials. The purpose of this study is to measure the accuracy of target applying X-sight lung tracking using the Gafchromic film in dynamic moving thorax phantom. The X-sight Lung Tracking quality assurance motion phantom simulates simple respiratory motion of a lung tumor and provides Gafchromic dosimetry film-based test capability at locations inside the phantom corresponding to a typical lung tumor. The total average error for the X-sight Lung Tracking System with a moving target was $0.85{\pm}0.22$ mm. The results were considered reliable and applicable for lung tumor treatment in CyberKnife radiosurgery system. Clinically, breathing patterns of patients may vary during radiation therapy. Therefore, additional studies with a set real patient data are necessary to evaluate the target accuracy for the X-sight Lung Tracking system.

• Journal of Oriental Neuropsychiatry
• /
• v.9 no.1
• /
• pp.1-24
• /
• 1998

The effects of Hyungbangjiwhangrang on the enhancement of learning and memory of AD model rats were studied with Morris water maze and radial arm maze. Sample group was electrolytically lesioned on nbM, and then daily treated with the medicine for two months. Control group with nbM lesion, and sham group with the sham operation were treated the vehicle for same duration. The following results were observed.1. As the learning trials of Morris water maze processed repeatedly, sham group achiened 201.64${\pm}$33.13 seconds in 1st trial, 153.14${\pm}$61.80 seconds in 2nd, 106.21${\pm}$46.81 seconds in 3rd, 76.64${\pm}$48.40 seconds in 4th, and 52.29${\pm}$38.25 seconds in 5th. The control group achieved 224.08${\pm}$29.16 in 1st trial, 191.77${\pm}$67.97 seconds in 2nd, 177.77${\pm}$65.44 seconds in 3rd, 140.92${\pm}$68.27 seconds in 4th, and 126.46${\pm}$79.15 seconds in 5th. The sample group achieved 223.36${\pm}$23.33 seconds in 1st trial, 215.86${\pm}$38.93 seconds in 2nd, 190.79${\pm}$51.57 seconds in 3rd, 155.79${\pm}$62.67 seconds in 4th, and 127.93${\pm}$62.11 seconds in 5th. Therefore, these data shows that all three groups were improved in learning capacity as trials were repeated, but the shame group showed prominent improvement in learning compared with the control group(p<0.05).2. In memory retention test of Morris water maze that counts the staying time in the target area, sham group stayed for 15.36${\pm}$5.39 seconds, the control group stayed for 5.54${\pm}$5.64 seconds, and the sample group stayed for 7.43${\pm}$6.09 seconds. The analysis of the memory retention data shows that the sham group marked more significant improvement stati- stically in memory retention compared with the control group(p<0.05).3. In the learning of radial arm maze, the number and rate of animals that arrive the learning criteria amounted 12 out of 14, 85.7% in sham group, 4 out of 13, 30.8% in the control group, and 10 out of 14, 71.4% in the sample group So, the sample group shows better learning capacity significantly compared with the control group(p<0.05). With the experimental results above, Hyungbangjiwhangtang can be supposed to have the improving effects on the learning and memory of AD rats induced by eletronical injury of nbM.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.4
• /
• pp.473-485
• /
• 2015

The problems for non-rotating of a disc cutter proceed from the faults in inner parts of the disc cutter such as the leak of hydraulic fluid, the intrusion of tunnel mucks and water, overloading, overheating, poor assembly and substandard material. The rotating of a disc cutter is an indicator to show that the inner parts of disc cutter is operable, although the rotational torque depends on the extent of the damage. Therefore, the key in the problems for non-rotating of disc cutter is to maintain that the tapered roller bearings are working properly. This study aims to investigate the inner parts disassembled from disc cutters applied to the field tests in order to help decision for reuse of the disc cutters. As results, surface finishing to remove the scratch on the load zone of the hubs is needed, with the intent to reuse a hub. And the investigation of lapping surface by optical microscope of floating seals and the contamination test of oil need to be performed for reuse of a disc cutter. Especially, the analysis results show that the floating seals play a key role in the normal operation of bearings. There is nothing significant to report in the rest parts such as bearing, shaft, seal retainers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.97-107
• /
• 2017

In the field of automatic door, the infrared rays and microwave sensor are much used as the important components in charge of the motor's operation control of open and close through the incoming signal of object recognition. In case of existing system that the sensor of the infrared rays and microwave are applied to the automatic door, there are many malfunctions by the infrared rays and visible rays of the sun. Because the automatic doors are usually installed outside of building in state of exposure. The environmental change by temperature difference occurs the noise of object recognition detection signal. With this problem, the hardware fault that the detection sensor is unable to follow the object moving rapidly within detection area makes the sensing blind spot. This fault should be improved as soon as possible. Because It influences safety of passengers who use the automatic doors. This paper conducted an experiment to improve the detection area by installing extra ultrasonic sensor besides existing detection sensor. So, this paper realize the computing circuit and detection algorithm which can correctly and rapidly process the access route of objects moving fast and the location area of fixed obstacles by applying detection and advantages of ultrasonic signal to the automatic doors. With this, It is proved that the automatic door applying ultrasonic sensor is improved detection area of blind spot sensing through field test and improvement plan is proposed.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.2
• /
• pp.35-44
• /
• 2002

The translation and the rotation of camera occur global motion which affects all over the frame in video sequence. With the video sequences containing global motion, it is practically impossible to extract exact video objects and to calculate genuine object motions. Therefore, high compression ratio cannot be achieved due to the large motion vectors. This problem can be solved when the global motion compensated frames are used. The existing camera motion estimation methods for global motion compensation have a large amount of computations in common. In this paper, we propose a simple global motion estimation algorithm that consists of linear equations without any repetition. The algorithm uses information .of symmetric points in the frame of the video sequence. The discriminant conditions to distinguish regions belonging to distant view from foreground in the frame are presented. Only for the distant view satisfying the discriminant conditions, the linear equations for the panning, tilting, and zooming parameters are applied. From the experimental results using the MPEG test sequences, we can confirm that the proposed algorithm estimates correct global motion parameters. Moreover the real-time capability of the proposed technique can be applicable to many MPEG-4 and MPEG-7 related areas.

• Management & Information Systems Review
• /
• v.37 no.2
• /
• pp.259-281
• /
• 2018

Advocates of mandatory IFRS adoption claim that IFRS increase financial statement comparability, which in turn leads to greater cross-border investment(Securities and Exchange Commision, 2008). The notion is that improved financial statement comparability reduces the information acquisition costs of global investors and thereby increase their investment in foreign firms. The purpose of this study is to examine this assertion by examining whether the K-IFRS adoption rusults in improved comparability that leads to increased investment by foreign investment. We also examined whether the relation between comparability and foreign investment has strengthen after adoption of K-IFRS. To achieve the purpose of our study, we measure Korean firms comparability using stock price model, stock return model and cash flow from operation model by Barth et al.(2012). We use both foreign ownership in the end of year and average during the year for dependent variables were to reduce bias. We test our hypothesis using 1,817 firm-year observation of KOSPI firms during the period of our analysis, 2011-2015. Consistent with our hypothesis, we find K-IFRS adoption results in a greater increase in foreign investment in firms with high comparability firms. This result indicate that the adoption of K-IFRS intends to achieve the international accounting convergence as stated in the roadmap and to reduce the Korea Discount.

• Journal of the Korean Dietetic Association
• /
• v.4 no.2
• /
• pp.235-244
• /
• 1998

Hand washing is an important component of hygiene program for food handlers. Hands can be a source of direct or indirect contamination of foods with pathogenic microorganisms. In this study, the effectiveness of hand washing methods and the use of 70% alcohol solution against transient skin bacteria was tested in an university foodservice facility. 70% alcohol solution is sprayed for 5 seconds automatically when hands are placed in the dispenser. Samples were taken using swab technique in meat cutting area, vegetable trimming area, and vegetable cutting area: before and after washing hands according to planned methods, and after being sprayed with 70% alcohol solution after washing hands. The bacteriological analysis of total plate counts, coliform, fecal coliform of food handlers' hands was done. Statistical data analysis was completed with Mann-Whitney U test and Kruskal-Wallis model using the SPSS program. The levels of initial contamination of workers' hand were significantly different by the work areas($x^2$=9.156, p<0.01). Workers in the vegetable trimming area had more heavily soiled hands than in the other work areas. Mean of TPC counts and coliform was 8.97×$10^5$ CFU/12.4$cm^2$, 2.93×$10^2$ MPN/12.4$cm^2$ respectively, but fecal coliform was not detected. Transient bacteria were removed from hands after washing and using 70% alcohol solution but were not removed completely. Mean reduction percentage in TPC varied among work areas and ranged from 93.19% to 94.99%, and in coliforms from 97.31% to 100%. A significant difference in TPC was found between before and after hand disinfection (Z=-2.714, p<.01) and between standardized hand washing procedures and un-standardized hand washing procedures(z=-2.301, p<.01). Subjects using the hand sanitizer showed a great elimination of TPC(99.45% reduction), but this effect was valid only after following proper washing procedures. Based on the results, the most effective hand washing method was recommended as the combination of the standardized hand washing procedure with warm-water and use of the 70% alcohol solution. The results can be used to develop hand hygiene programs and training strategies for enhancing hand hygiene practices for food handlers in foodservice operations.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.137-146
• /
• 2012

In SCM(Supply Chain Management), a management paradigm where the customer satisfaction is to be achieved by minimizing the cost, reducing the uncertainty, and obtaining the overall optimization. As it performs the integrated operation of the paths of information, assets, and knowledge from the raw material providers to the retailers, the adoption of RFID(Radio Frequency Identification) in SCM could be expected to magnify the effectiveness of the system. However, there is a huge risk by deciding whether or not RFID system is adopted without the objective analysis under the uncertain circumstances. This research paper presents the statistical analysis methodologies for the comparison of RFID with Barcode on the aspect of utility and the statistical analysis tool, RUSAT, which was programmed for nonstatisticians' convenience. Assuming a pharmaceutical industry, this paper illustrates how the data were entered and analyzed in RUSAT. The results of this research are expected to be used not only for the pharmaceutical related company but also for the manufacturer, the whole-saler, and the retailer in the other logistic industries.

• Journal of Environmental Impact Assessment
• /
• v.21 no.6
• /
• pp.823-839
• /
• 2012

Environmental Specimen Banks (ESBs) are playing pivotal role in monitoring the effect of environmental pollution on the ecosystem based on the retrospective analysis of the representative samples collected regularly and stored in cryogenic condition. In Korea, National Environmental Specimen Bank (NESB) was established in 2009 and the standard operating procedures (SOPs) for sampling, and cryogenic milling and storage had been prepared during 2007-2010. Since then, the tentative SOPs for the seven kinds of specimens (shoots of Red Pine (Pinus densiflora) and Korean Pine (Pinus koraiensis), leaves of Mongolian Oak (Quercus mongolica) and Zelkova Tree (Zelkova serrata), eggs of Feral Pigeon (Columba livia var. domestica), muscles and organs of Common Carp (Cyprinus carpio), and Freshwater Bivalve (Unio (Nodularia) douglasiae)) have been put to test in the field and laboratory as well against the practicality and feasibility. The SOPs were improved by reflecting the findings from the research and the following discussion regarding the selection of specimen (Feral Pigeon suffering from a control management), sample size (a problem of decreasing number of sampling trees related to increasing sampling time) and period (a problem related to a bud growth), and sampling methods etc.. In addition, barcoding system for the management of the specimen information, and monitoring system of the cryogenic storage to regulate the optimum temperature and the liquid nitrogen level were also developed for the efficient and effective control of the samples. Lastly, the safety guide and emergency protocol were augmented to guarantee a safe work environment with the cryogenic facility. These improvements of the SOPs are expected to contribute to more stable operation of the NESB.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.208-223
• /
• 1994

The purpose of this study was to evaluate the efficiency of diffusive(or passive) sampler in measuring airbone organic solvents. Diffusive samplers are generally simple in construction and do not require power for operation. The efficiency of the diffusive samplers has not sufficiently been investigated in Korea. Three types of samplers were studied in this study. The sampling and analytical results by passive samplers were compared with results by charcoal tube method recommended by NIOSH(National Institute for Occupational Safty and Health). The following characteristics are identified and studied as critical to the performance passive monitors; recovery, reverse diffusion, storage stability, accuracy and precision, face velocity and humidity, n-Hexane, TCE(trichloroethylene) and toluene were used as test vapors. A dynamic vapor exposure system consisting of organic vapor generator and sampling chamber for evaluating diffusive samplers are made. The results of the study are summarized as follows. 1. NIOSH recommands that the overall accuracy of a sampling method in the range of 0.5 to 2.0 times the occupational health standard should be ${\pm}25$ percent for 95 percent confidence level. Among three types of diffusive samplers, sampler A has permeation membrane and samplers Band C have diffusive areas, samplers A and B met the criterion that overall accuracy for 95% confidence level of the samplers were within ${\pm}25$ percent of the reference value. Sampler C had overall accuracy ${\pm}9.6%$ and ${\pm}11.8%$ in hexane and TCE, respectively. The concentration of toluene was overestimated in sampler C with overall accuracy of ${\pm}43.9%$. 2. The desorption efficiencies of diffusive samplers were 96-107%. 3. There was no significant sampe loss during four weeks of storage both with and without refrigeration. 4. There was no significant reverse diffusion, when the samplers were exposure to clean air for 2 hours after sampling for 2 hours at the level of 2 TLY. 5. In case of 8 hours sampling, relative differences(RD) of concentrations between charcoal tube method and diffusive method were 15-39%, 13-46%, and 4-35% for sampler A, B and C, respectively. The performance was poor in 8 hours sampling for multiple substance monitors. 6. At high velocity(100 cm/sec), samplers B and C overestimated the concentrations of organic vapors, and sampler A with permeation membrance gave better results. 7. At 80% relative humidity, samplers showed no siginificant effect. Low humidity also did not affect the diffusive samplers.