• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.2 s.120
• /
• pp.54-59
• /
• 2007

Cereal, computer software, wine, small appliances, and fast foods are examples of products that have switched from folding carton to microflute corrugated paperboard. Microflute corrugated paperboards have their unique wonderful packaging characteristics that are driving forces for people to use more and more. Good strength property, excellent shock absorbing ability, and beautiful outer appearance of microflute corrugated paperboards go hand and hand with their environmental advantages. It is known that physical properties of microflute corrugated paperboards depend on not only properties of base paper but corrugator operating conditions. This study was carried out to investigate on the corrugator's optimum operating conditions for making micro flute corrugated paperboards. Lab-scaled micro flute corrugator was installed and run with systematic changes of operation conditions to investigate the effects of operation conditions on physical properties of micro flute corrugated paperboards.

• Journal of the Korean Vacuum Society
• /
• v.10 no.4
• /
• pp.440-448
• /
• 2001

The operation properties of DBD plasma reactors were observed by using 20 kV square pulse at the cylindrical and planar type of reactors in the condition of air pressure. The optimum operation frequency $f_0$ which optimizes the efficiency of operation was found as such $f_0\proptoexp(-C)$ when the current-voltage curve and charge-voltage curve were observed. Using these properties the dissipated power was evaluated. The dissipated power at the optimum frequency of operation was varied as the value of capacitance which is dependent on the structure and the dielectric material of the reactor, and had the maximum value at the specific value of capacitance. With these value of capacitance, DBD reactors which has a high level of efficiency can be formed.

• Communications of the Korean Mathematical Society
• /
• v.29 no.4
• /
• pp.555-568
• /
• 2014

A set with an operation defined on a family of subsets is studied. The operation is used to generalize the topological space itself. The operation defines the operation-open subsets in the set. Relations are studied among two types of the interiors and the closures of subsets. Some properties of maximal operation-open sets are obtained. Semi-open sets and pre-open sets are defined in the sets with operations and some relations among them are proved.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.73-80
• /
• 2016

The preliminary test for the dual mode plasma torch system was carried out to explore the operation properties in advance. The dual mode plasma torch system that is able to operate in transferred, non-transferred, or dual mode is very adequate for melting the mixed wastes including nonconductive materials such as concrete, asbestos, etc. since it exploits both the high efficiency of heat transfer to the melt in transferred mode and stable operation in non-transferred mode. Also, system operation including restarting is reliable and very easy. A stationary melter with a refractory structure was designed and manufactured considering the melting behavior of slags to minimize the refractory erosion. The power supply for the dual mode plasma torch system built with high power insulated gate bipolar transistor (IGBT) modules has functions for both current control and voltage control and is sufficient to suppress the harmonics during the operation of the plasma torch. The power supply provides two different voltages for transferred operation and non-transferred. It is confirmed that the operation voltage in transferred is always higher than non-transferred. The dual mode plasma torch system was successfully developed and is under operation for a melting experiment to optimize operation data.

• 보존과학연구
• /
• s.29
• /
• pp.239-254
• /
• 2008

In this division, regarding the establishment of operation system of Conservation Science Center, we have tried to find out research trends and advanced operation system of Italian conservation centers, which play an active part in the field of restoration of cultural properties internationally. And the results will be utilized for the establishment of Conservation Science Center. Italy is a country having a long history of restoring cultural properties. In this field, it is largely divided into research & development institutes. And restoration institute and they are operated under system in which research & development institute implement research projects for restoring cultural properties and restoration specialists take receive the results and utilize them. They have different business processing system compared to Conservation Science Center which will implement research-development and restoration(conservation treatment) concurrently. Each institute, carrying out differentiated and specialized research projects per region, maintains smooth cooperative relationship with national institutes, neighboring universities and even afflated schools through horizontal-mutual collaboration joint research, and sharing of equipments, in the field of cooperation between national institutes, cooperation with neighboring universities, and connection to belonging schools. There institutes show us a good example which can be utilized in the future organizational structure of Conservation Science Center. It is expected that their operation system and possessed technologies such as utilization of human resources pool and cooperation with relevant fields can be used usefully in the management and operation of Conservation Science Center.

• Agricultural and Biosystems Engineering
• /
• v.6 no.2
• /
• pp.59-64
• /
• 2005

In the study, the cone index, the cohesion and the internal resistant angle of soil were measured before and after tillage in order to suggest relative improvement in soil properties. The tillage methods tested in the study were five combinations of plow and rotary tillage operation and the experiments were performed on five selected test fields. The maximum tillage depth was 20 cm under the ground. The CIs for all the tillage operations were improved in comparison with those before tillage. The best combination of tillage operations for improving the CIs of soil was one plow operation followed by one rotary. After applying the tillage operations, the internal resistance angle reduced by 7-8 degree and the cohesion decreased up to about $1N/cm^2$ in comparison with those before tillage. We concluded that the cone index, the cohesion and the internal resistant angle of soil could be used as measures for representing the relative degree of tillage for a specific tillage operation. In addition, the study was useful as a basic research tool for developing an decision making system that determines an optimal tillage method with soil properties.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1329-1330
• /
• 2007

Phase-change random access memory(PRAM) has many advantages compare with the existing memory. For example, fast programming speed, low programming voltage, high sensing margin, low power consume and long cyclability of read/write. Though it has many advantages, there are some points which must be improved. So, we invented and studied new constitution of $Ge_{1}Se_{1}Te_{2}$ chalcogenide material. Actually, the performance properties have been improved surprisingly. However, crystallization time was as long as ever for amorphization time. In this paper, we studied in order to make set operation time and reset operation voltage reduced. In the present work, by alloying Sb in $Ge_{1}Se_{1}Te_{2}$. we could confirm that improved its set operation time and reset operation voltage. As a result, the method of Sb-alloyed $Ge_{1}Se_{1}Te_{2}$ can be solution to decrease the set operation time and reset operation voltage.

• Journal of Applied and Pure Mathematics
• /
• v.5 no.1_2
• /
• pp.1-8
• /
• 2023

This study is on a Boolean B or Boolean lattice L in abstract algebra with closed binary operation *, complement and distributive properties. Both Binary operations and logic properties dominate this set. A lattice sheds light on binary operations and other algebraic structures. In particular, the construction of the elements of this L set from idempotent elements, our definition of k-order idempotent has led to the expanded definition of the definition of the lattice theory. In addition, a lattice offers clever solutions to vital problems in life with the concept of logic. The restriction on a lattice is clearly also limit such applications. The flexibility of logical theories adds even more vitality to practices. This is the main theme of the study. Therefore, the properties of the set elements resulting from the binary operation force the logic theory. According to the new definition given, some properties, lemmas and theorems of the lattice theory are examined. Examples of different situations are given.

• Journal of the Chungcheong Mathematical Society
• /
• v.32 no.2
• /
• pp.245-250
• /
• 2019

In this paper, the notion of ${\gamma}$-operation on a supratopological space is introduced. We found that the ${\gamma}$-operation induces a supratopology (topology) containing a given supratopology. We also introduce the notions of (${\gamma}$, S)-continuous function and almost ${\Gamma}$-supracompact defined by ${\gamma}$-operation on a supratopological space and investigate some properties for such notions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.63-71
• /
• 2012

This study was carried out to investigate pulping properties of the forest biomass arising from the national forest management operation. The forest biomass was collected and classified into many groups according to their species and age. After the chips were made from the forest biomass, the measurement of chip size and chemical analysis were performed. To make the pulps from the forest biomass, the kraft pulping was applied and thereafter the physical and optical properties of kraft pulps were measured. The pulp fibers from the forest biomass had the similar mean fiber length, but their properties became different according to wood species and ages. Differently from the other species, kraft pulps from chestnut wood had the highest kappa number. Acacia, paulownia and chestnut woods made kraft pulps with lower tensile strength and brightness than the others. It could be concluded that acacia, paulownia and chestnut woods must be screened out in order to make a good quality of kraft pulps while being collected during Forest Management Operation.