• The Journal of Korea Robotics Society
• /
• v.1 no.1
• /
• pp.17-24
• /
• 2006

Though the final goal of mobile robot navigation is to be autonomous, operators' intelligent and skillful decisions are necessary when there are many scattered obstacles. There are several limitations even in the camera-based tele-operation of a mobile robot, which is very popular for the mobile robot navigation. For examples, shadowed and curved areas cannot be viewed using a narrow view-angle camera, especially in bad weather such as on snowy or rainy days. Therefore, it is necessary to have other sensory information for reliable tele-operations. In this paper, sixteen ultrasonic sensors are attached around a mobile robot in a ring pattern to measure the distances to obstacles. A collision vector is introduced in this paper as a new tool for obstacle avoidance, which is defined as a normal vector from an obstacle to the mobile robot. Based on this collision vector, a virtual reflection force is generated to avoid the obstacles and then the reflection force is transferred to an operator who is holding a joystick to control the mobile robot. Relying on the reflection force, the operator can control the mobile robot more smoothly and safely. For this bi-directional tele-operation, a master joystick system using a hall sensor was designed to resolve the existence of nonlinear sections, which are usual for a general joystick with two motors and potentiometers. Finally, the efficiency of a force reflection joystick is verified through the comparison of two vision-based tele-operation experiments, with and without force reflection.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.12
• /
• pp.583-595
• /
• 2002

Homing operation can be defined as a series of actions which are necessary for a mobile robot to move from the current position with any arbitrary orientation to a desired position with a specified orientation, while avoiding possible obstacles. In this paper, a homing and obstacle avoidance algorithm for nonholonomic mobile robots is proposed. The proposed algorithm consists of a local goal generator, a discrete state controller, and local path tracking controller based on Aicardi's path following algorithm. In the discrete state controller, 4 states are defined according to the environmental conditions and 4 desired high-level command for the states are given as follows: avoid, wander, home and homing zones. The proposed local goal generator is designed to generate the desired local path by using weighted distance transforms which are newly made to satisfy the nonholonomic constraints of mobile robots. Here, subgoals are also found as vertices of the desired local path. To demonstrate result effectiveness and applicability of the proposed algorithm, computer simulations are illustrated and experimental results for a real mobile robot system are also provided.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.155-162
• /
• 2007

For providing smart home service, middleware technologies for electronic appliance control by network and user location information for location based service are important. Recently research using ultrasonic and radio signal are affected by the obstacle. In this paper, we suggest inertial sensor that is not affected by the obstacle. Also, we use RFID for initializing position. It solve error accumulation and position initialize problem. In this paper, we suggest following system for smarthome service and localization. This system are composed smarthome middleware, user localization system on middleware, inertial sensor and RFID Reader. This system shows operation without affect of obstacle in smarthome environment.

• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.86-93
• /
• 2017

The Expanded Guide Circle (EGC) method has been originally proposed as the guidance navigation method for improving the efficiency of the remote operation using the sensory information. The previous algorithm is, however, concerned only for the omni-directional mobile robot, so it needs to suggest a suitable one for a mobile robot with non-holonomic constraints. The ego-kinematic transform is a method to map points of $R^2$ into the ego-kinematic space which implicitly represents non-holonomic constraints for admissible paths. Thus, robots with non-holonomic constraints in the ego-kinematic space can be considered as "free-flying object". In this paper, we propose an effective obstacle avoidance method for mobile robots with non-holonomic constraints by applying EGC method in the ego-kinematic space using the ego-kinematic transformation. This proposed method shows that it works better for non-holonomic mobile robots such as differential-drive robot than the original one. The simulation results show its effectiveness of performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.167-173
• /
• 2020

A lot of research has been done on pipe climbing robots to investigate the aging pipe structures of nuclear power plants and petrochemical plants. Nevertheless, most of the research on pipe climbing robots focused on the structural design and foundational motion control of pipe climbing robots. So, For the operator to control the pipe climbing robot, it has many difficulties to climb the pipe and avoid obstacles by manual operation. In this paper, propose an algorithm that recognizes obstacle by using camera images of pipe climbing robots, estimates the distance between pipe climbing robots and obstacles, and determines the position where pipe climbing robots can catch pipes to avoid obstacles between pipes.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.3
• /
• pp.945-953
• /
• 2018

In this paper, we use 3-D LIDAR for obstacle detection and avoidance maneuver for autonomous unmanned operation. It is aimed to avoid obstacle avoidance in unmanned water under marine condition using only single sensor. 3D lidar uses Quanergy's M8 sensor to collect surrounding obstacle data and includes layer information and intensity information in obstacle information. The collected data is converted into a three-dimensional Cartesian coordinate system, which is then mapped to a two-dimensional coordinate system. The data including the obstacle information converted into the two-dimensional coordinate system includes noise data on the water surface. So, basically, the noise data generated regularly is defined by defining a hypothetical region of interest based on the assumption of unmanned water. The noise data generated thereafter are set to a threshold value in the histogram data calculated by the Vector Field Histogram, And the noise data is removed in proportion to the amount of noise. Using the removed data, the relative object was searched according to the unmanned averaging motion, and the density map of the data was made while keeping one cell on the virtual grid map. A polar histogram was generated for the generated obstacle map, and the avoidance direction was selected using the boundary value.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.856-864
• /
• 2008

This paper describes a vehicle low speed driving assistant (VLDA) system that is composed of laser scanner. This vehicle is designed for following lead vehicle (LV) without driver's operation. The system is made up several component systems that are based on unmanned ground vehicle (UGV). Each component system is applied to use advanced safety vehicle developed to complete UGV system. VLDA system was divided into vehicle control system and obstacle detecting system. The obstacle detecting system calculate distance and angle of LV and transmit these data to vehicle control system using front, left and right laser scanners. Vehicle control system makes vehicle control values such as steering angle, acceleration and brake position and control vehicle's movement with steering, acceleration and brake actuators. In this research, we designed VLDA system like as low speed cruise control system and test it on real road environments.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.116-126
• /
• 2001

This paper suggests a numerical method to find optimal geometric path and minimum-time motion for a spatial 6-link manipulator arm (PUMA 560 type). To find a minimum-time motion, the optimal geometric paths minimizing 2 different dynamic performance indices are searched first, and the minimum-time motions are searched on these optimal paths. In the algorithm to find optimal geometric paths, the objective functions (performance indices) are selected to minimize joint velocities, actuator forces or the combinations of them as well as to avoid one static obstacle. In the minimum-time algorithm the traveling time is expressed by the power series including 21 terms. The coefficients of the series are obtained using nonlinear programming to minimize the total traveling time subject to the constraints of velocity-dependent actuator forces.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.31-40
• /
• 2006

Many researches on path planning and obstacle avoidance for the fundamentals of mobile robot have been done. Informations from various sensors can find obstacles and make path. In spite of many solutions of finding optimal path, each can be applied to only a constrained condition. This means that it is difficult to find a universal algorithm. A optimal path with a complicated computation generates a time delay which cannot avoid moving obstacles. In this paper, we propose the algorithm of path planning and obstacle avoidance for mobile robot. We call the proposed method Random Access Sequence(RAS) method. In the proposed method, a small region is set first and numbers are assigned to its neighbors, then the path is selected using these numbers. It has an advantage of fast planning and simple operation. This means that new path selection may be possible within short time and that helps a robot to avoid obstacle in any direction. When a robot meets moving obstacles, it avoids obstacles in a random direction. RAS method using obstacle information from variable sensors is useful to get minimum path length to goal.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.5
• /
• pp.951-959
• /
• 2014

In the past few years, data leakage of information assets has become a prominent issue. According to the National Intelligence Service in South Korea, they found 375 cases of data leakage from 2003 to 2013, especially 49 of cases have been uncovered in 2013 alone. These criminals are increasing as time passes. Thus, it constitutes a reason for establishment and operation of ISMS (Information Security Management System) even for private enterprises. But to be ISMS certified, there are many exposed or unexposed barriers, moreover, sufficient amount of studies has not been conducted on the barriers of ISMS Certification. In this study, we analyse empirically through exploratory factor analysis (EFA) to find the obstacle factors of ISMS Certification. The result shows that there are six obstacle factors in ISMS Certification; Auditing difficulty and period, Consulting firm related, Certification precedence case and consulting qualification, Internal factor, CA reliability and auditing cost, Certification benefit.