• Journal of Multimedia Information System
• /
• v.9 no.2
• /
• pp.145-154
• /
• 2022

The authors are making a prototype flexible board of a radio-frequency transmitter for measuring an electromyogram (EMG) of a flying moth and plan to apply for an experimental station license from the Ministry of Internal Affairs and Communications of Japan in the summer of 2022. The goal is to create a continuous low-dose exposure standard that incorporates scientific and physiological functional assessments to replace the current standard based on lethal dose 50. This paper describes the technical evaluation of the hardware. The signal of a bipolar EMG electrode is amplified by an operational amplifier. This potential is added to a voltage-controlled crystal oscillator (27 MHz, bandwidth: 4 kHz), frequency-converted, and transmitted from an antenna about 10 cm long (diameter: 0.03 mm). The power source is a 1.55-V wristwatch battery that has a total weight of about 0.3 g (one dry battery and analog circuit) and an expected operating time of 20 minutes. The output power is -7 dBm and the effective isotropic radiated power is -40 dBm. The signal is received by a dual-whip antenna (2.15 dBi) at a distance of about 100 m from the moth. The link margin of the communication circuit is above 30 dB within 100 m. The concepts of this hardware and the measurement data are presented in this paper. This will be the first biological data transmission from a moth with an official license. In future, this telemetry system will improve the detection of physiological abnormalities of moths.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.373-379
• /
• 2022

In this paper, since the APD(Avalanche Photo Diode) for LTV(Light to Voltage) conversion uses a high voltage in the operating range unlike other PD(Photo Diode)s, the quenching resistor must be connected in series to prevent overcurrent when using the TIA(Transimpedance Amplifier). In such a case, quenching resistance may affect the transfer function of the TIA circuit, resulting in serious stability. Therefore, in this paper, by analyzing the effect of APD quenching resistance on the voltage and current loop transfer function of TIA, we propose a loop analysis and a method for determining the quenching resistance value to improve stability. TIA circuit with quenching resistance was designed by the proposed method and the stability of operation was verified through simulation and chip fabrication.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.78-84
• /
• 2022

An air circuit breaker (ACB) is an electrical protection device that interrupts abnormal fault currents that result from overloads or short circuits in a low-voltage power distribution line. The ACB consists of a main circuit part for current flow, mechanism part for the opening and closing operation of movable conductors, and arc-extinguishing part for arc extinction during the breaking operation. The driving mechanism of the ACB is a spring energy charging type. The faster the contact opening speed of the movable conductors during the opening process, the better the breaking performance. However, there is a disadvantage that the durability of mechanism decreases in inverse proportion to the use of a spring capable of accumulating high energy to configure the breaking speed faster. Therefore, to simultaneously satisfy the breaking performance and mechanical endurance of the ACB, its driving mechanism must be optimized. In this study, a dynamic model of the ACB was developed using the MDO(Mechanism Dynamics Option) module of CREO, which is widely used in multibody dynamics analysis. To improve the opening velocity, the Taguchi design method was applied to optimize the design parameters of an ACB with many linkages. In addition, to evaluate the improvement in the operating characteristics, the simulation and experimental results were compared with the MDO model and improved prototype sample, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.767-774
• /
• 2022

In this paper raw spectrum data were analyzed to suggest the moving forward of performance evaluation and quality control of wind profilers of four manufacturers operating in South Korea. For the analysis, the profile of the spectrum averaged by season and the profile of four statistical values (minimum, average, median, and maximum) calculated by Power Spectrum Density (PSD) were used. The quality of spectrum data was the best for LAP-3000, followed by YKJ3, PCL-1300, and CLC-11-H. In Cheorwon and Chupungnyeong, where PCL-1300 was installed, the variability of the spectrum due to ground clutter and non-meteorological signals was large, so ground clutter removal and signal processing such as moving average and multi-peak were required. In Gunsan and Paju, where CLC-11-H was installed, DC (Direct Current) bias and propagation folding were found, so it is necessary to remove the DC bias and limit the effective altitude for observation.

• Electronics and Telecommunications Trends
• /
• v.36 no.3
• /
• pp.53-64
• /
• 2021

As the 5G service market is expected to grow rapidly, the development of high-power, high-efficiency power amplifiers for the 5G communication infrastructure is indispensable. Gallium nitride (GaN) is attracting great interest as a key device in power devices and integrated circuits due to its wide bandgap, high carrier concentration, high electron mobility, and high-power saturation characteristics. In this study, we investigate the technology trends of Ka-band GaN radio frequency (RF) power devices and integrated circuits for operation in the millimeter-wave band of recent 5G mobile communication services. We review the characteristics of GaN RF high electron mobility transistor (HEMT) devices to implement power amplifiers operating at frequencies around 28 GHz and compare the technology of foreign companies with the device characteristics currently developed by the Electronics and Telecommunication Research Institute (ETRI). In addition, the characteristics of Ka-band GaN monolithic microwave integrated circuit (MMIC) power amplifiers manufactured using various GaN HEMT device technologies are reviewed by comparing characteristics such as frequency band, output power, and output power density of integrated circuits. In addition, by comparing the performance of the power amplifier developed by ETRI, the current status and future direction of domestic GaN power devices and integrated circuit technology will be discussed.

• Korean small business review
• /
• v.42 no.1
• /
• pp.1-17
• /
• 2020

As technology competition among companies has intensified, the importance of technology protection is increasing day by day. However, according to the status of technology leakage in Korea, the technology protection level of SMEs is weak. SMEs' technology leakage continues to occur, and the damage can be even more serious to SMEs. Thus, the government is operating various support systems for SMEs. However, despite the support system, the interest and use of SMEs is low. This study examines the current status of major support systems for SME technology protection in Korea, and empirically analyzes the recognition and expectation effects of companies on the support systems. Based on the results, this study discusses ways to improve the recognition and use of the support system. The results of this study will contribute to strengthening SMEs 'technology protection by increasing the utility and enhancing the utilization of the support systems.

• Journal of People, Plants, and Environment
• /
• v.23 no.2
• /
• pp.159-170
• /
• 2020

The purpose of this study was to understand the current status of education and programs and to identify the items that urban residents need most for garden management. First of all, there were 45 sites (40.5%) with gardens operated by city and county local governments nationwide, and 41(91.1%) of them had dedicated staff (1.8 persons on average). The average area of gardens was 18,623 m², garden area per person was 20.27m², the average number of participants was 683, and the average period of use was 8.69 months. In addition to gardening activities, 14 (31.1%) out of 45 sites were operating small group meetings, with an average of 2.29 meetings and 67 participants. In the satisfaction survey after gardening activities, 88.9% of 18 sites were satisfied. According to the questionnaire about education and programs related to garden users, an average of four sessions were conducted per education. In terms of education, the contents were in the following order: basic education on garden cultivation (33.9%) > prior education on garden operation (28.9%) > pest control (14.0%) > eco-friendly management (11.6%) > pesticides and Positive List System (9.9%) > others (1.7%). Over 95% of the respondents were generally satisfied. Regarding the perception survey on which items are needed to develop garden management guidelines, the most necessary items were in the order of crop management (38.7%) > public garden etiquettes among users (27.9%) > pest control (14.4%) > weed management (13.5%) > activities using harvest (5.4%). The contents that are to be included in the guidelines were in the order of garden planning and crop selection (17.2%) > cultivation techniques and schedule (16.5%) > pest and soil management (15.7%) > introduction of garden crops and gardening models (12.7%) > garden etiquettes (10.7%). In establishing urban garden management plans by region, the results will have high utility value as the basic data for continuous garden operation by setting a direction that meets the regional characteristics as well as the needs of urban residents.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.72-77
• /
• 2021

The radial distribution of etch rate was analyzed using the ion energy flux model in VHF-CCP. In order to exclude the effects of polymer passivation and F radical depletion on the etching. The experiment was performed in Ar/SF6 plasma with an SF6 molar ratio of 80% of operating pressure 10 and 20 mTorr. The radial distribution of Ar/SF6 plasma was diagnosed with RF compensated Langmuir Probe(cLP) and Retarding Field Energy Analyzer(RFEA). The radial distribution of ion energy flux was calculated with Bohm current times the sheath voltage which is determined by the potential difference between the plasma space potential (measured by cLP) and the surface floating potential (by RFEA). To analyze the etch rate uniformity, Si coupon samples were etched under the same condition. The ion energy flux and the etch rate show a close correlation of more than 0.94 of R² value. It means that the etch rate distribution is explained by the ion energy flux.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.287-295
• /
• 2021

This study examines the performance of program providers(PP) considering various factors. This study employs the panel regression models with the dataset from 2014 to 2019. This study analyzes how various market structural factors and behavioral factors have impact on the performance. The results show that the high proportion of retransmission fees to broadcasting revenue is negatively associated with total media revenue and operating income while advertising revenue is positively associated with these factors. The results imply PPs that have heavily depended on the fees have not showed a superior performance. Current PP markets are evaluated to have low average revenue per users and thus the size of retransmission fees cannot be enlarged. Under such market conditions, PPs focusing on raising advertising revenue show better performance. This study also suggests that PPs that own diverse channel assets have improved their performances.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.34 no.1
• /
• pp.5-26
• /
• 2023

This study was employed as a basic study to make a medium and long term development plan for a library system in Nowon-gu, Seoul. This study investigated the characteristics and local conditions of Nowon-gu, and analyzed public library system that can promote the development of the library by understanding the current state of the public library, the library's facility status, collections, manpower, and programs. Through the survey, the frequency and purpose of library use of local residents, users' opinions on satisfaction, collection development, expected roles, and policy directions were investigated. Depending on SWOT analysis, missions and strategies for midto long-term development plans for Nowon-gu Library were devised. Based on the research results, researchers proposed strengthening future education, reading culture, sustainable environmental library, and Nowon-gu cultural platform as development strategies.