• 상하수도학회지
• /
• 제26권3호
• /
• pp.423-430
• /
• 2012

This study was conducted to qualify the equality of the flow distribution from open channel between rapid mixing basin and flocculation basins in a domestic S_ water treatment plant, and to suggest a remedy for improving the equality. In order to evaluate the feasibility of the suggested remedy, computational fluid dynamics (CFD) technique are used, and for verifying the CFD simulation results tracer tests were carried out. From the results of CFD simulation and tracer tests, it was investigated that the modification of hydraulic structure in the distribution channel, which is to install the longitudinal orifice baffle in flow direction, could improve the equality of the flow distribution over 75%.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.43-49
• /
• 2006

The hull form of icebreaking tanker depends on the trade route and ice characteristic. The hull form has to be designed for icebreaking concept if the vessel is operating in heavy ice and also the hull from has to be optimized for general tanker when the ship is operating in ice-free ocean. This paper presents comparison of ship resistance in pack ice, level ice and open water. Four ships are used to compare the resistance characteristic. One is conventional tanker and three ships are icebreaking tankers. The ice model test was carried out at the IOT (Institute for Ocean Technology, Newfoundland, Canada) and open water test was performed at 55MB (Samsung Ship Model Basin). The ice resistance of conventional tanker was predicted by Colbourne's method. The resistance of open water, pack ice and level ice are compared and discussed. The best hull form of icebreaker is not good in open water performance compare to conventional tanker. This result explains that the hull form of icebreaker and normal tanker have to compromise when the ship is operated in ice and ice-free condition. The result of this paper gives a guide for icebreaking tanker design.

• Corrosion Science and Technology
• /
• 제11권6호
• /
• pp.232-241
• /
• 2012

This work focused on corrosion of carbon steel bolted GECM/Al parts in tap water and NaCl solutions. In tap water and NaCl solutions, open circuit potential of GECM and its potentials in a series of carbon steel bolt>Ti>Al became active. Regardless of test materials, open circuit potentials in tap water were noble, and increasing NaCl concentration, its potentials became active. Immersion test of single specimen showed that no corrosion occur in Ti and GECM. In tap water, carbon steel bolt didn't show red corrosion product and in chloride solutions, corrosion rate in 1% NaCl solution was greater than its rate in 3.5% NaCl solution and red corrosion product in 1% NaCl solution was earlier observed than that in 3.5% NaCl solution. It seems that this behavior would be related to zinc-coatings on the surface of carbon stee l bolt. On the other hand, aluminium was corroded in tap water and chloride solutions. Corrosion of aluminium in tap water was due to the presence of chloride ion in tap water by sterilizing process.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제18권2호
• /
• pp.97-103
• /
• 2009

Sericulturists in the vicinity of Bangalore city irrigate their mulberry gardens with Vrishabhavathy stream water, which is polluted with domestic and industrial wastes from the city. To investigate the effect of pollutants on silkworm crops, a detailed field survey was conducted to study the cocoon yield pattern of the crops raised on mulberry irrigated with wastewater as against irrigation by bore/open wells. The villages along the stream were grouped into five test batches at about a distance of $5{\sim}8$ km from each other. The seasonal yield data with relevant information were collected through questionnaires from 117 rearers using stream water and 35 rearers using bore/open wells, the latter serving as control group. The average yield for 100 layings was 46 to 57 kg in the control group whereas in test groups, it ranged between 34 to 51 kg in the first test group and 22 to 38 kg in the rest. The difference in yield was $9{\sim}19$ kg depending on the season between control and test batches. In summer, this difference was higher, with high co-efficient of variation in test groups ($33{\sim}52$%). Further, water, soil and leaf samples were collected from selected rearers and were analyzed for zinc, copper, iron, lead and nickel. Results indicated significantly higher contents of these metals in samples from gardens using wastewater when compared control samples. Significantly (p<0.05 & p<0.01)) higher levels of zinc ($24{\sim}122$ ppm) and iron ($208{\sim}683$ ppm) were noticed in mulberry leaves during summer followed by winter and rainy season. The significance of high content of heavy metals in mulberry leaves and cocoon yield pattern of this area in relation to the quality of irrigation water is discussed.

• 한국해양공학회지
• /
• 제21권3호
• /
• pp.40-45
• /
• 2007

This study was performed to investigate the effect of various propeller tunnel shapes on the propulsion performance of a fishing boat. The propeller tunnel reduces the problem resulting from the open propeller accidentally catching the waste net and cable on the sea, as well as increasing the cruising speed. For 3 different tunnel geometries, the model test is conducted in the circular water channel, and the potential based panel method was applied to analyze the hydrodynamic characteristics of propeller. Also, both results are compared with each other to represent the difference between results of the model scale test and the potential theory. It is expected that these results could be referenced in the design of the propeller tunnel in consideration of the hydrodynamic interaction between the propeller and the tunnel.

• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.61-67
• /
• 2008

In this paper, electrochemical and microstructural characteristics of nickel-plated Alloy 600 were investigated in order to identify the performance of electroless Ni-plating on Alloy 600 in high-temperature aqueous condition with the comparison of electrolytic nickel-plating. For high temperature corrosion test of nickel-plated Alloy 600, specimens were exposed for 770 hours to typical PWR primary water condition. During the test, open circuit potentials (OCP's) of all specimens were measured using a reference electrode. Also, resistance to flow accelerated corrosion (FAC) test was examined in order to check the durability of plated layers in high-velocity flow environment at high temperature. After exposures to high flow rate aqueous condition, the integrity of surfaces was confirmed by using both scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). For the field application, a remote process for electroless nickel-plating was demonstrated using a plate specimen with narrow gap on a laboratory scale. Finally, a practical seal design was suggested for more convenient application.

• 한국환경과학회지
• /
• 제30권3호
• /
• pp.267-277
• /
• 2021

This study investigates sound, scenery, and soundscape preferences, which are sensory factors that users feel in a healing forest, comparing the difference in recovery by the soundscape. In the barrier-free, wooden walking path of the National Daegwallyeong Healing Forest, a survey site with five different conditions was selected. Users prefer water sounds the most and places with open views for scenery. For the complex sensation of soundscapes, the most preferred is a space where water sounds can be heard, and either a waterfall or an open view can be seen. A profile of mood states test was use to compare users' psychological recovery by the soundscape. It was found that users felt the most positive mood with water sounds and open views. In addition, users' preference for artificial sounds, scenery, and soundscape was the lowest. In the mood state test, it was found that the artificial soundscape incited the most negative emotions.

• Biomolecules & Therapeutics
• /
• 제9권2호
• /
• pp.125-130
• /
• 2001

Shin-Ki-Hwan (Shen-Qi-Wan, SKH), Bo-Jung-Ik-Ki-Tang (Bu-Zhong-Yi-Qi-Tang, BJIKT), and Sa-Mul-Tang (Si-Wu-Tang, SMT) have been used for various kinds of deficiency syndromes, such as 'yang', 'qi', and 'blood', respectively. The objects of this study were to determine the effects of water extracts of three different kinds of traditional Chinese medicine (TCM), SKH, BJIKT, and SMT, on the anxiolytic activities in the elevated plus-maze test and to clarify the differences among 'yang', 'qi', and 'blood'. The water extracts of SKH, BJIKT, and SMT were orally administered to male SD rats, at 1.0 g/kg for 10 days. All rats were subjected to behavioral tests for the anxiolytic activity at 10 days. SKH, for the benefiting 'yang'agents, significantly increased the ratio of open arms entry to the total arms entry and time spent in the open arms (p<0.05), suggesting anxiolytic effect. However, both BJIKT and SMT decreased the ratio of open arms entry to the total arms entry and increased times spent in the closed arms (p<0.05). From these findings, it can be speculated that SKH only exhibits anxiolytic effect and that the different anxiolytic effects in the elevated plus-maze test may be come from the meanings of 'yang', 'qi', and 'blood'in oriental diagnostics though the cases are restricted.

• Journal of the Korean Wood Science and Technology
• /
• 제50권3호
• /
• pp.167-178
• /
• 2022

To investigate the influence of manufacturing environment on bonding performance of mixed cross laminated wood (CLT) using polyurethane (PUR) adhesive, a boiling water soak delamination test according to the temperature and relative humidity was conducted. The 5-ply mixed CLT consisted of Japanese Larch for external and middle layer and yellow poplar for internal layer. The PUR adhesives with different opening times of 10 and 30 minutes were used. The mixed CLT was manufactured according to pressing times of PUR and manufacturing environments of summer and winter. In case of summer environment, the delamination rate of the mixed CLT with pressing time of 4 hours using a PUR adhesive with open time of 10 minutes met the requirements of KS F 2081. In case of winter environment, the delamination rate of the mixed CLT didn't meet the requirements of KS standard. However, it was possible to confirm the effect of improving the adhesive performance by adjusting the pressing time according to the open time of the adhesive under the manufacturing conditions. The delamination rate of CLT with open time 30 minutes PUR, manufactured by indirect moisture supply methods was 11.2% better than direct moisture supply methods. As a result of delamination test in the same condition of relative humidity and adhesive, it was found that the temperature of manufacturing environment influences the adhesive performance.

• 대한조선학회논문집
• /
• 제54권3호
• /
• pp.215-226
• /
• 2017

This paper presents numerical results of the performance of a marin propeller in cavitating and non-cavitating flow conditions. The geometry and experimental validation data of the propeller are provided in Potsdam Propeller Test Case(PPTC) in the framework of the second International Symposium on Marine Propulsors 2011(SMP'11) workshop. The PPTC includes open water tests, velocity field measurements and cavitation tests. The present numerical analysis was carried out by using the Reynolds averaged Navier-Stokes(RANS) method on a wall-resolved grid ensuring a y+=1, where the SST k-${\omega}$ model was mainly used for turbulence closure. The influence of the turbulence model was investigated in the prediction of the wake field under a non-cavitating flow condition. The propeller tip vortex flows in both cavitating and non-cavitating conditions were captured through adaptation of additional grids. For the cavitation flows at three operation points, Schnerr-Sauer's cavitation model was used with a Volume-Of Fluid(VOF) approach to capture the two-phase flows. The present numerical results for the propeller wake and cavitation predictions including the open water performance showed a qualitatively reasonable agreement with the model test results.