• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.808-814
• /
• 2021

The International Maritime Organization (IMO) explicitly stipulates the required performance of satellite based radio-navigation systems available for navigational purposes. Until 2019, the IMO had only recognized systems that could be serviced globally for satellite based radio-navigation. However, India's regional navigation satellite system has been approved recently, and other regional navigation satellite systems have also been made available for maritime navigation. Thus far, the IMO has approved the use of a total of five satellite navigation systems, such as the GPS, GLONASS, Galileo, BeiDou, and NavIC. In Korea, in addition to the four satellite based radio-navigation systems that are used excluding NavIC, Japan's regional navigation satellite system that has not yet been approved can be received. Japan has requested the IMO to recognize the QZSS as a WWRNS to formalize its use for ocean navigations. Given that the service coverage of the QZSS is not limited to Japanese territorial waters and also includes Korean waters, the suitability analysis of the QZSS for domestic navigation is important for maritime safety. This study aims to analyze the suitability of using the QZSS for domestic navigation. Accordingly, this work explores the status and plans of the QZSS as well as the performance required by the IMO for recognition as a WWRNS. The methods and environmental conditions examined in this work are described, and the analyzed results are presented in terms of positioning accuracy and availability.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.478-485
• /
• 2018

Aids to Navigation (AtoN) is one of the marine traffic safety facilities that promotes the safety of maritime traffic and enhance ship's operational efficiency. However, functional failure of AtoN due to ship's collision or bad weather conditions leads to inconvenience or navigational risk to various users such as the ship operators. For insstance, the largest container port in Korea, Busan Port has experienced a total of 400 AtoN accidents in the past 12 years (2006-2017).Therefore, an average of 20.6 days of recovery time is required, which increases the maritime safety anxiety for AtoN users. is the objective of this study was to present the quantitative support of the users for the prevention of AtoN accidents and the improvement of the feasibility of implementing more efficient management in Korea. A survey was conducted on the users of Busan port areas to investigate general perception of AtoN in general and the accidents that have happened, and to estimate the economic value of navigational risk reduction by implementing effective AtoN management measure. Using the representative non-market valuation method for environmental or public goods known as contingent valuation method (CVM), the economic value granted to users for the AtoN services in Busan port was estimated to at least 16 billion won. Therefore, these finding could be used by AtoN managers and/or policy makers as a valuable data to identify the users' need of various AtoN services including Busan Port and to establish and implement more efficient management plan.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.2
• /
• pp.83-88
• /
• 2019

BACKGROUND: In recent years, studies on microplastics have focused on their decomposition in the ocean. However, no studies have been reported on the interaction between microplastics and metal ions in aqueous solutions. Therefore, this study was conducted to evaluate the adsorption capacity of cadmium(Cd) by polypropylene (PP) in aqueous solution. METHODS AND RESULTS: Cadmium adsorption characteristics of PP in aqueous solution were evaluated through various conditions including initial Cd concentration(1.25-25 mg/L), contact time(0.5-24 h), initial pH(2-6) and temperature($20-50^{\circ}C$). Cadmium adsorption fit on PP was well described by Freundlich isotherm model with adsorption capacity(K) of 0.028. The adsorption amount of Cd by PP increased with increasing contact time, indicating that adsorption of PP by Cd was dominantly influenced by contact time. Especially, the removal efficiency of Cd by PP was highest at high temperature. However, the surface functional groups of PP before and after adsorption of Cd were similar, suggesting that adsorption of Cd by PP is not related to surface functional groups. CONCLUSION: Our study suggests that PP affects the behavior of Cd in aqueous solution. However, in order to clarify the specific relationship between microplastics and metal ions, mechanism research should be carried out.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.64-71
• /
• 2019

It is very important to understand the mechanism of estuary topographic changes for the study of estuary management and treatment methods. In this study, the effects from the land-side, such as rainfall, river discharge, sediment discharge, and sea side, such as tide, tidal current, wave and surface sediments related to the topographic changes of the Nakdong river estuary were investigated and analyzed. Based on the analyzed data, topographic modeling was performed to analyze the topographic change and contribution of external force conditions. As a result of numerical modeling, the topographic change showed that erosion that predominates in the water directly affected by the discharge of the estuary barrage. The deposition predominates in the indirectly affected tideland. As sediments moved along the water way being sorted and distributed by the wave, the deposition predominated in the front of the barrier island. Compared with the deposition dominance, which is the result of the topographic change prediction, the impact of each external force condition gives larger erosion. However, the combined impact of each external force condition showed deposition dominant. Therefore, the topographic changes of the Nakdong river estuary are considered to be the result of various complex external factors. The impacts of each external force condition show the different contribution to each comparison area. These results should be considered when establishing the estuary management method. It must be understood that this is the result of complex interactions.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.857-862
• /
• 2020

In March 2011, a tsunami off Japan caused radioactive material that had seeped into the sea from the Fukushima nuclear accident to flow to the Pacific Ocean, causing pollution to sea life. For a comparative evaluation with the area surrounding the site of a nuclear power plant by the release of radioactive materials, an area 20 to 30 km away from the emergency protection plan area was selected as a comparative point considering weather conditions, population distribution, etc. In addition, the government intends to analyze the minimum detection radiation received by residents around the nuclear power plant and evaluate the effective dose. Analysis of tritium radiation from water samples showed that most of the samples were not detected and that 0.0014 % to 0.777 % of the annual legal standard of 1 mSv for the general public had little effect on the human body. Therefore, the measurement and analysis of water samples around the nuclear power plant site is expected to help relieve anxiety, such as exposure to the general public and neighboring residents due to radiation release.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.2
• /
• pp.113-120
• /
• 2021

The wave-propagation phenomenon in an infinite medium has been used to describe the physics in many fields of engineering and natural science. Analytical or numerical methods have been developed to obtain solutions to problems related to the wave-propagation phenomenon. Energy radiation into infinite regions must be accurately considered for accurate solutions to these problems; hence, various numerical and mechanical models as well as boundary conditions have been developed. This paper proposes a new boundary condition that can be applied to scalar-wave or horizontally-polarized shear-wave (or SH-wave) propagation problems in layered waveguides. A governing equation is obtained for the SH waves by applying finite-element discretization in the vertical direction of the waveguide and subsequently modified to derive the boundary condition for the infinite region of the waveguide. Using the orthogonality of the eigenmodes for the SH waves in a layered waveguide, the new boundary condition is shown to be equivalent to the existing root-finding absorbing boundary condition; further, the accuracy is shown to increase with the degree of the new boundary condition, and its stability can be proven. The accuracy and stability are then demonstrated by applying the proposed boundary condition to wave-propagation problems in layered waveguides.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.533-541
• /
• 2022

An analysis of marine accidents that occurred in the last five years, revealed that 77.0 % of all grounding accidents and 66.1% of all marine casualties involved small vessels, which was a very high level relatively. The Mokpo Regional Maritime Safety Tribunal (Mokpo-KMST) inquired on 72 cases of marine accidents in 2021, of which 10 cases were grounding accidents. Furthermore, eight cases of grounding accidents occurred in small fishing vessels. This study analyzed eight cases of grounding accidents on small fishing vessels that inquired in the jurisdictional area of Mokpo-KMST in 2021. I found out that this grounding occurred in clear weather with good visibility (2-4 miles) and good sea conditions with a wave height of less than 1 meter. Furthermore, I found that the main causes of grounding were drowsy navigation due to fatigue, neglect of vigilance, neglect of checking ship's position, overconfidence in GPS plotter, and lack of understanding of chart symbols and tidal differences. To reduce grounding accidents of small fishing vessels, I suggested the following measures. First, crew members who have completed the able seafarer training course on bridge watchkeeping should assist to the master. Second, alarm systems to prevent drowsiness should be installed in the bridge. Third, the regulation should be prepared for the performance standards and updating GPS plotter. Finally, the skipper of small vessels should be trained periodically to be familiar with chart symbols and basic terrestrial navigation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.394-401
• /
• 2021

The construction of new renewable energy facilities is steadily increasing every year. In particular, the offshore wind farm market, which has abundant development scalability and a high production coefficient, is growing rapidly. The southwest sea has the highest possible offshore wind power potential, and related projects are to be promoted. This study presents a basic design procedure by the EUROCODE and considers structural safety in the development of an effective of shore wind foundation in the clay layer. In a previous study, the wind power generator of 5MW class was the main target, but the 8MW of wind turbine generator, which meets the technical trend of the wind turbine market in the Southwest sea, was selected as the standard model. Furthermore, a foundation that fulfills the geological conditions of the Southwest sea was developed. The structural safety of this foundation was verified using finite element method. Moreover, structural safety was secured by proper reinforcement from the initial design. Based on the results of this study, structural safety check for various types of foundations is possible in the future. Additionally, specialized structural design and evaluation guidance were also established.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1267-1273
• /
• 2022

Although the Korea shipbuilding industry has recently been receiving most of the orders for ships in the world, production processes are being disrupted due to a shortage of manpower at the production site. This is because the workers quit the shipyard as both work and wages were reduced due to the long slump in the shipbuilding industry. The main reason for the increase in orders was the large-scale orders for Qatar LNG carriers, and the situation in which the technical specifications required for ships are becoming more complex is also working to an advantage. Because the contract delivery time is of utmost importance for ships, the dock launch plan is the most important management item among the shipyard's major processes. The structure to be built in the dock may be a hull that has left the design work or a finished vessel, and in some cases, it is often at the level of some blocks of the hull. When launching, the hull is affected by the hogging or sagging moment due to the fluid force, and securing the safety of the structural strength of the block connection is of utmost importance. In a normal process, the connecting member launches after welding has been completed, but in actual shipbuilders, quick decision-making is needed on the conditions for securing structural safety to comply with the docking schedule. In this study, a detailed analysis method and applicability using a bending stress evaluation method and finite element analysis modelling were analyzed to rationally judge the above-mentioned problems from an engineering point of view. The main contents mentioned in the thesis can be used as good examples when conducting similar structural strength evaluations in the future.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.28 no.3
• /
• pp.95-120
• /
• 2023

Methane (CH₄) is a key greenhouse gas in the atmosphere with 85 times greater greenhouse potent relative to carbon dioxide (CO₂). The atmospheric concentration of CH₄ is rapidly increasing due to the intensive usage of CH₄ and the thawing of the cryosphere. Additionally, with the current warming of ocean water, the dissociation of gas hydrates, an ice-like compound and the largest reservoir of CH₄ on Earth, is expected to occur, resulting in the release of CH₄ from the seafloor into the overlying water and atmosphere. Moreover, bottom water hypoxia is another concern that potentially introduces greenhouse gases into the atmosphere. With ongoing global warming and eutrophication, the size and duration of bottom water hypoxia are rapidly increasing. These low-oxygen conditions would relocate the redox zone shallower in sediment or in the water column, causing the release of CH₄ into the atmosphere and thereby intensifying global warming. However, there exists a gap in the understanding of CH₄ dynamics including its generation in relation to bottom water hypoxia. Therefore, this review article aims to understand the relationship between CH₄ and bottom water hypoxia and to draw attention to CH₄ investigation in Korea.