• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.249-260
• /
• 2004

The longitudinal steel connection of reinforced concrete bridge column is sometimes practically unavoidable, however the current Korean bridge design specifications have no special provisions about lap-splices of longitudinal steel. This paper reports experimental results of a research program investigating the seismic performance of circular RC bridge columns with respect to longitudinal steel connection detailing. Twenty-one circular column specimens were tested under quasi-static test. The columns with the entire longitudinal steel lap-spliced within plastic hinge region show relatively sudden strength degradation and low ductility than the columns with continuous longitudinal steel and the columns with half of longitudinal steel lap-spliced. However, the seismic performance of the column with mechanically connected longitudinal steel is similar to that of the column with continuous longitudinal steel. The final objectives of this study are to suggest appropriate longitudinal reinforcement connection details for the limited ductility design concept and to provide quantitative reference data and tendency for performance or damage assessment based on the performance levels such as cracking, yielding, collapse, etc. Ultimate displacement/drift ratio, displacement ductility, response modification factor, equivalent viscous damping ratio, residual deformation index, and effective stiffness are investigated and discussed in this paper.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.60-67
• /
• 2008

A low-power 2.4GHz fractional-N frequency synthesizer has been designed for 2.4GHz ISM band applications such as Bluetooth, Zigbee, and WLAN. To achieve low-power characteristic, the design has been focused on the power optimization of power-hungry blocks such as VCO, prescaler, and ${\Sigma}-{\Delta}$ modulator. An NP-core type VCO is adopted to optimize both phase noise and power consumption. Dynamic D-F/Fs with no static DC current are employed in designing the low-power prescaler circuit. The ${\Sigma}-{\Delta}$ modulator is designed using a modulus mapping circuit for reducing hardware complexity and power consumption. The designed frequency synthesizer which was fabricated using a $0.18{\mu}m$ CMOS process consumes 7.9mA from a single 1.8V supply voltage. The experimental results show that a phase noise of -118dBc/Hz at 1MHz offset, the reference spur of -70dBc at 25MHz offset, and the channel switching time of $15{\mu}s$ over 25MHz transition have been achieved. The designed chip occupies an area of $1.16mm^2$ including pads where the core area is only $0.64mm^2$.

• Journal of Ecology and Environment
• /
• v.33 no.2
• /
• pp.157-164
• /
• 2010

We evaluated the restoration effect by introducing willows as a means of controlling invasions of giant ragweed (Ambrosia trifida L.) on a riparian site. Our preliminary survey demonstrated that a problematic exotic species, giant ragweed and the representative riparian species, Salix koreensis are in competitive exclusive relationship. We planted willows at 1 m intervals on the bank of the Dongmun stream at Munsan, Paju, in Central Western Korea as an experimental restoration practice. We installed two 50 m $\times$ 5 m sized restored and non-restored for this experimental study. The non-restored plots were located on river banks, which were covered with concrete blocks and left in itself without any treatment. The height of willow was measured after each of three consecutive growing seasons and compared with the height of the giant ragweed. Although the height of Salix gracilistyla did not achieve the height of the giant ragweed, the height of S. koreensis surpassed that of giant ragweed in the third year after introduction. The results were also reflected in the relative light intensity on the herb layer of willow stand, and thereby the relative light intensities of stands, which were dominated by S. koreensis or restored by introducing S. koreensis, 1.99 $\pm$ 0.33 (%, mean $\pm$ SD) and 1.92 $\pm$ 0.50 (%, mean $\pm$ SD), respectively were lower than those in the stands treated by S. gracilistyla, 3.01 $\pm$ 0.43 (%, mean $\pm$ SD). The giant ragweed stands receive full sunlight as there are no any vegetation layers higher than the herb layer formed by the giant ragweed. As the result of Detrended Correspondence analysis ordination based on naturally established vegetation, the stands dominated by willows and giant ragweed showed different species composition between both stands. The species composition of the restoratively treated sites resembled the reference sites more than the non-treated sites. The species diversity (H') of the sites restored by introducing S. koreensis and S. gracilistyla was higher than the non-restored site dominated by A. trifida. On the basis of our results, the restoration of riparian vegetation equipped with integrated features could contribute not only to the control of exotic plants including giant ragweed but also to ensure the diversity and stability of riverine ecosystems.

• Journal of The Korean Association For Science Education
• /
• v.9 no.1
• /
• pp.19-37
• /
• 1989

The purpose of this study was to investigate the development of logical thinking and scientific reasoning pattern of Korean high school students. To carry out this study subjects were selected about 2,000 Junior high school students, and about 4,100 senior high school students throughout the nation. They were identified as concrete, transitional or formal operational stage with the use of TOLT(the Test of Logical Thinking) by Tobin and Capie(1980), and TOSR(the Test of Scientific Reasoning) by W.A Farmer(1986). This study turned out that more than 76% of Junior high school students were classified as the concrete operational stage and about 44% of senior high school students were classified as the formal operational stage, while about 26% of them were still in the concrete operational level. This study showed that the main factor of the intellectual development of students is learning by the gradual advancement of their grades and especially entrance into the senior high school rather than by the physical growth. This study also showed that there are the take-off stage of the development of logical thinking between fourteen and fifteen years of their ages. Less than 25% of junior high school students were in the formal operational stages which are capable of control of variables, probabilistic, correlation and combinational logic in problem-solving situation, while 33-54% of senior high school students were in the formal operational levels. 38% of junior high school students were in the formal operational stage which is capable of proportional logic, while about 55% of senior high school students were in the formal operational stage. Less than 20% of senior high school students were classified as group of highly capable of scientific reasoning, while more than 23% of them were classified as group of poor capability. It also turned out that there are differences or no differences between male and female students of each school in problem-solving situation regarding each logic approach. These differences were proved to be fluctuating depending on the situations and their grades. The other results of this study is similar to those of other researches such as Tomlinson-Keasey 1972, Coleman 1973, Lawson 1973, Lawson and Renner 1974, Neimark 1975, Han 1982, and Kim 1989.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.61-68
• /
• 2010

In this paper, a research and development result for the implementation of single station fixed temperature detector for residential fire prevention is described. The detector was developed for the certification in Japanese market because of very low domestic market situation. It is in the situation that there is no other regulation especially for residential detectors in Korea, Japanese case has been reviewed. Investigation of domestic legal circumstances and a comparative study for the test standard owned by KFI (Korea Institute of Fire Industry & Technology) and JFEII (Japan Fire Equipment Inspection Institute) respectively are also indicated. The detector alarms with a buzzer and an indicating LED. In the implementation ultra low power MCU(Micro Controller Unit) is applied to control the sleeping state and the monitoring state properly with low current consumption. To sense the temperature fast response thermistor is adopted in the design of fixed temperature residential detector. Automatic test function and alarm stop function are also considered in the design. The major factors which influence to current consumption are explained for the purpose of design reference. Main electronics circuit parts related to it's characteristics of the detector are described. It is explained that the measured current and experimental result of the battery discharge can be met over 10 years operation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6451-6457
• /
• 2013

Background and Purpose: Indigenous people who leave their hometowns and move to the city to earn a living became urban aboriginals. During the process of adapting to urban living situations, they may use various coping strategies such as smoking to overcome their stress. Therefore, it is crucial to provide health education including smoking prevention, increasing knowledge regarding of tobacco hazard, self-efficacy of anti-smoking, and adjusting smoking behavior so as to empower their anti-smoking motivation to prevent lung cancer. The purpose of this study was to explore the effectiveness of an anti-smoking program on urban aboriginals in Taiwan. Methods: A quasi-experimental study design with purposeful sampling was employed. A total of 125 aboriginal subjects were recruited from two local churches at Shu Lin area in northern Taiwan. Subjects were divided into an experimental group (n =64 ) and a control group (n = 61). Both took pre-tests in order to set baseline values, and only the experimental group participated for 3-weeks in the anti-smoking program classes. Both groups took post-tests immediately after the intervention in order to evaluate the immediate effects of the teaching program, and a follow-up test was conducted four weeks after the intervention. Data were analyzed using descriptive statistics, one-way ANCOVA, and repeat measure ANCOVA. Results: After controlling for confounding variables, the results showed that there were statistically significant differences in the self-efficacy of anti-smoking and smoking behavior between experimental and control groups in the immediately post-test and the follow-up test (p < 0.05). However, there was no significant differences in the recognition of hazards of smoking at eiter time point. Conclusions and Implications for Practice: The findings of this study revealed that the anti-smoking program effectively improved self-efficacy of anti-smoking, and decreased the smoking behavior in urban aboriginals. They provide useful information as a reference regarding of aboriginal health promotion to health providers. It is imperative that anti-smoking be reinforced for those regular smokers to prevent induction of lung cancer.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.112-121
• /
• 1997

In this paper, we study a model parameter compensation method for noise-robust speech recognition. We study model parameter compensation on a sentence by sentence and no other informations are used. Parallel model combination(PMC), well known as a model parameter compensation algorithm, is implemented and used for a reference of performance comparision. We also propose a modified PMC method which tunes model parameter with an association factor that controls average variability of gaussian mixtures and variability of single gaussian mixture per state for more robust modeling. We obtain a re-estimation solution of environmental variables based on the expectation-maximization(EM) algorithm in the cepstral domain. To evaluate the performance of the model compensation methods, we perform experiments on speaker-independent isolated word recognition. Noise sources used are white gaussian and driving car noise. To get corrupted speech we added noise to clean speech at various signal-to-noise ratio(SNR). We use noise mean and variance modeled by 3 frame noise data. Experimental result of the VTS approach is superior to other methods. The scheme of the zero order VTS approach is similar to the modified PMC method in adapting mean vector only. But, the recognition rate of the Zero order VTS approach is higher than PMC and modified PMC method based on log-normal approximation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.4
• /
• pp.15-25
• /
• 2012

The research on the FPGA CAD tools in academia has been lacking practicality due to the underlying FPGA fabric architecture which is too simple and inefficient to be applied for commercial FPGAs. Recently, the database of placement positions and routing graphs on commercial FPGA architectures has been built, and provided for enabling the academic development of placement and routing tools. To extend the limit of academic CAD tools even further, we have developed the evaluation toolkit for the K-FPGA architecture which is under development. By providing interface for exchanging data with a commercial FPGA toolkit at every step of mapping, packing, placement and routing in the tool chain, the toolkit enables individual tools to be developed without waiting for the results of the preceding step, and with no dependency on the quality of the results, and compared in detail with commercial tools at any step. Also, the fabric primitive library is developed by extracting the prototype from a reporting file of a commercial FPGA, restructuring it, and modeling the behavior of basic gates. This library can be used as the benchmarking target, and a reference design for new FPGA architectures. Since the architecture is described in a standard HDL which is familiar with hardware designers, and read in the tools rather than hard coded, the tools are "data-driven", and tolerable with the architectural changes due to the design space exploration. The experiments confirm that the developed library is correct, and the functional correctness of applications implemented on the FPGA fabric can be validated by simulation. The placement and routing tools are under development. The completion of the toolkit will enable the development of practical FPGA architectures which, in return, will synergically animate the research on optimization CAD tools.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.231-238
• /
• 2018

The facial skin condition expresses physical healthy as well as is considered one of important factors for attractiveness. Especially, most people prefer shiny skin. So various cosmetics has been manufactured for expression of shiny skin. However, shiny skin is subjectively evaluated, and difficult to evaluate clear shininess using the existing method in oily skin. Moreover, there is no clear classification criteria between shininess and glossiness, which is assessed negatively in the skin. So there has not been a reference value by mechanical measurement to define and classify shiny skin from greasy skin. In this study, we measured skin biophysical parameters (gloss, hydration, translucency and sebum) and facial images which are selected by volunteers using sensory evaluation. According to the measurement results, the values of gloss, sebum, and translucency were similar in both shiny and greasy skin; the values of sebum and gloss increased, whereas those of translucency decreased. However only skin moisture values statistically increased in shiny skin. In conclusion, we propose objective assessment criteria for classifying shiny and greasy skin using device measurement and quantitative assessment.

• Korean Journal of Poultry Science
• /
• v.41 no.4
• /
• pp.305-311
• /
• 2014

Copy number variation (CNV) is a form of structural variation that shows various numbers of copies in segments of the DNA. It has been shown to account for phenotypic variations in human diseases and agricultural production traits. Currently, most of chicken breeds in the poultry industry are based on European-origin breeds that have been mostly provided from several international breeding companies. Therefore, National Institute of Animal Science, RDA has been trying to restore and improve Korean native chicken breeds (12 lines of 5 breeds) for about 20 years. Thanks to the recent advance of sequencing technologies, genome-wide CNV can be accessed in the higher resolution throughout the genome of species of interest. However, there is no systematic study available to dissect the CNV in the native chicken breed in Korea. Here, we report genome-wide copy number variations identified from a genome of Korean native chicken (Line L) by comparing between the chicken reference sequence assembly (Gallus gallus) and a de novo sequencing assembly of the Korean native chicken (Line L). Throughout all twenty eight chicken autosomes, we identified a total of 501 CNVs; defined as gain and loss of duplication and deletion respectively. Furthermore, we performed gene ontology (GO) analysis for the putative CNVs using DAVID, leading to 68 GO terms clustered independently. Of the clustered GO terms, genes related to transcription and gene regulation were mainly detected. This study provides useful genomic resource to investigate potential biological implications of CNVs with traits of interest in the Korean native chicken.