• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.73-79
• /
• 2004

While CDMA systems are proven to be excellent solutions for cellular communications, they suffer from severe multi-path interferences and are unable to support high-data-rate transmissions over frequency-selective fading channels. This paper introduces a novel downlink transmission method for next generation mobile communication systems. The proposed method allows frequency-domain equalization at the receiver while maintaining the compatibility with the 3rdgeneration CDMA systems.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.921-922
• /
• 2006

This paper presents a novel scheme that quickly searches for the sweet spot of multiple array antennas, and locks on to it for high-speed millimeter wavelength transmissions. The proposed method utilizes a modified genetic algorithm, which selects a superior initial group through preprocessing in order to solve the local solution in a genetic algorithm. TDD (Time Division Duplex) is utilized as the transfer method and data controller for the antenna. Once the initial communication is completed for the specific number of individuals, no longer antenna's data will be transmitted until each station processes GA in order to produce the next generation. After reproduction, individuals of the next generation become the data, and communication between each station is made again. Simulation results confirmed the efficiency of the proposed method.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.318-321
• /
• 2000

This paper propose the method of constructing the highly efficiency adder and multiplier systems over finite fie2, degree of uk terms, therefore we decrease k into m-1 degree using irreducible primitive polynomial. We propose two method of control signal generation for perform above decrease process. One method is the combinational logic expression and the other method is universal signal generation. The proposed method of constructing the highly adder/multiplier systems is as following. First of all, we obtain algorithms for addition and multiplication arithmetic operation based on the mathematical properties over finite fields, next we construct basic cell of A-cell and M-cell using T-gate and modP cyclic gate. Finally we construct adder module and multiplier module over finite fields after synthesize ${\alpha}$$\^$k/ generation module and control signal CSt generation module with A-cell and M-cell. Then, we propose the future research and prospects.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.104-125
• /
• 2023

The predator-prey interaction in freshwater ecosystems is a crucial area in the ecological study field and one of example to find such interaction is to investigate stomach contents. However, traditional method through visual inspection often induce misidentification, as it depends critically on intactness of physically visible data. In this study, we utilized Next-Generations Sequencing (NGS) technology to test the applicability stomach content analysis and overcome such limitation. NGS was applied to analyze the stomach contents of the Hemibarbus labeo, Tachysurus fulvidraco, and Plecoglossus altivelis collected in the lower part of Nakdong River. As a result, T. fulvidraco had a higher number of Animalia operational taxonomic units (OTUs) intake rate than H. labeo. At the same time, P. altivelis had higher number of Plantae OTUs intake rate than T. fulvidraco and higher Protozoa OTUs intake rate than H. labeo respectively. Therefore, NGS technology application enable to overcome traditional method's limitation and discover hidden interspecific interaction which can further be used in appropriate habitat assessment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.82-87
• /
• 2011

In this paper, a sensorless speed control system is designed for the next generation high speed railway at zero and low speed region. The applied vector control scheme is a maximum torque per ampere(MTPA) method to utilize reluctance torque of IPMSM. The designed sensorless control scheme is a rotating high frequency voltage signal injection method. To verify the designed system, a simulator for the vector controller and sensorless controller is implemented using Matlab/simulink.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1262-1270
• /
• 2010

The next generation domestic high speed railway system is a power dispersed type and uses vector control method for motor speed control. Nowadays, inverter driven induction motor system is widely used. However, recently PMSM drives are deeply considered as a alternative candidate instead of an induction motor driven system due to their advantages in efficiency, noise reduction and maintenance. In this paper, the maximum torque control approach is presented for the IPMSM drives with reluctance torque. The applied control method uses maximum torque control per ampere technique. Simulation programs based on Matlab/Simulink are developed. Finally the designed system is verified by simulation and their characteristics are analyzed by the simulation results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.181-186
• /
• 2014

Knowledge sharing by collective intelligence, and knowledge production/sharing by outer cooperation is also important for the company. Therefore, it is needed the next generation KMS(Knowledge Management System) designed and built which based on SNS. In my paper, the problems of KMS are analyzed and new KMS's requirements and paradigm changes are examined by analysis of investigation of existing KMS. KMS based on SNS is appropriate for the next generation KMS in consideration of new KMS's requirements, that is, collective intelligence, open innovation, and convergence with IT technology. So a building method of KMS based on SNS is presented by new next generation KMS's architecture, main design and knowledge-talk design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1272-1279
• /
• 2001

Owing to the change of various services requirement and the change of communication paradime as the development of new transit network technology: ATM, MPLS and DWDM, the latest PSTN is evolving into the next generation network, which have the very high speed integrated packet network of open-type structure. but in the next generation network, the existing voice service is being researched for the continuous technology development as the important service from the viewpoint of communication business. This paper suggests the method of efficient bandwidth management in the media gateway that can accommodate the various new services as well as the existing voice services by appling to the next generation network.

• Journal of Digital Contents Society
• /
• v.13 no.4
• /
• pp.625-629
• /
• 2012

This paper is presented to prepare NGN quality assurance management process under the quality system test methodology. The process should be drawn for NGN quality measurement framework of multimedia traffic. NGN test bed management process model are QoS measurement metrics, measurement interval meter above, and measuring tools, measuring equipment, measurement methods and measurement results from a series of processes for the analysis and methodology. This model, NGN quality assurance activities should be utilized in the future. Quality target level only when themselves constantly measured and managed, does not guarantee the communication quality of service. It is sensitive to the importance of NGN network technology paradigm for research on quality management in the NGN.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.108-110
• /
• 2002

In this paper, a fault location algorithm is suggested for line to line faults in distribution networks. Conventional fault location algorithms use the symmetrical component transformation, a very useful tool for transmission network analysis. However, its application is restricted to balanced network only. Distribution networks are, in general, operated in unbalanced manners, therefore, conventional methods cannot be applied directly, which is the reason why there are few research results on fault location in distribution networks. Especially, the line to line fault is considered as a more difficult subject. The proposed algorithm uses direct 3-phase circuit analysis, which means it can be applied not only to balanced networks but also to unbalanced networks like distribution a network. The comparisons of simulation results between one of conventional methods and the suggested method are presented to show its effectiveness and accuracy.