• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1999-2001
• /
• 2000

Impulse breakdown voltage characteristics of sulphur-hexafluoride/nitrogen ($SF_{6}-N_{2}$) mixtures were presented. The applied voltages were the positive and negative lightning impulse (1.2/44${\mu}s$) and oscillating impulse ($0.4{\mu}s$/2.08MHz) voltages. The predischarge current was observed to clarify the breakdown mechanism. The electrode system was consisted of plane to plane configuration with a needle-shaped protrusion whose length and diameter are 10mm and 1mm. The measurements were carried out at the gas pressure of mixtures up to 0.5MPa with nitrogen concentrations varying from 5 to 20%. The electrical breakdown in $SF_{6}-N_{2}$ mixtures develops with steplike pulses in leader mechanism. The minimum breakdown voltages for the negative lightning and oscillating impulse voltages were higher than those for the positive.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1510-1515
• /
• 2004

The effects of additive ions on the generation of metallic nanoparticles were evaluated using a corona induced supersonic nozzle. Applying the corona discharge to the nanoparticle generator, a tungsten needle and the supersonic nozzle are used as an anode electrode and a cathode electrode respectively. The corona ions act as nuclei for the silver vapor condensation. The ion density was controlled precisely as varying the applied voltage between electrode and nozzle. The mean diameter of the silver particle decreases as the ion density increases. However, the number concentration of the silver particle tended to increase with the ion density. The size distribution is more uniform as the ion density increases.

• 보존과학연구
• /
• s.19
• /
• pp.179-191
• /
• 1998

The Dumu of casted iron objects which is the big vessel for the prevention of fire to wood building is conserved in Kyongpok Palace(Dumu sizes：diameter 97cm, height 42cm, thickness 2cm, weight 250kg). The treated objects which some parts were lost, were not corroded, but cracted and broken by an external power, and strongly attached an cement layer on inside surface. First of all cement layer was mechanically removed by pneumatic needle scaler, welded to electric method for broken and cracked pieces, and then the lost sections were restored to use a epoxy resin and glass fiber. In order to prevent a damage during the handling, the restoration section of the inside surface was treated different colour in comparison with original part.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.129-130
• /
• 2022

This study is conducted to identify improvements in the setting time estimation system through the Mock-up test of the finishing automation system and the setting estimation system. As a result of the study, it is necessary to adjust the spring strength of the setting time estimator and the diameter and length of the estimation needle so that the value of the hardness can be measured from 15HD to around 40HD.

• Journal of Korean Society of Forest Science
• /
• v.38 no.1
• /
• pp.33-45
• /
• 1978

The purpose of present study is to analyze the genetic variation of natural stand of Pinus densiflora. In 1975 following after the selection of 1974, twenty trees from each of three natural populations of the species were selected and their open-pollinated seeds were collected, and the locations and conditions of the populations ate presented in table 1, 2 and figure 1. Some morphological traits of the populations were already detailed in our second report of this series, in which Myong-Ju and Ul-Jin populations were regarded to be superior phenotypically to suweon population. The morphological traits of cone, seed and seed-wing, and also the growth performances and needle characters of the seedling were observed in the present study according to the previous methods. The results obtained are summarized as follows; 1. The meteorological data obtained by averaging the records of 30 year period (1931~1960) measured from the nearest meteorological stations to each population are shown in fig.2, 3, 4. The distributional patterns of investigated climate factors are generally considered to be similar among the locations. However, the precipitation density during growing season and the air temperature during dormant season on Suweon area, population 6, were quite different from those of the other areas. 2. The measurements of fresh cone weight, length, diameter and cone index, i.e., length to diameter ratio are presented in table 7. As shown in table 7, all these traits except for cone diameter seem to be highly significant in population differences and family differences within population. 3. The morphological traits of seed and seed-wing are detailed in table 8, 9, and highly significant differences are recognized among the populations and the families within population in seed-wing length, seed-wing index, seed weight, seed-length and seed index but not among the populations in the other observed traits. The values of correlation coefficient between the characters of cone and seed are given in table 10 and the positive significant correlations can be observed in the most parts of the compared traits. 4. Significant statistical differences among populations and families within population are observed in the growth performances of 1-0 and 1-1 seedling height of these progenies. But the differences in root collar diameter are shown only among families within population. As shown in table 13, the most parts of correlations are not significant statistically between the growth performances of seedling and the seed characters. 5. The number of stomata row on both sides of needle and the serration density were measured in the seedlings from each of the families of the three populations. As shown in table 15, statistical differences are considered to be significant among the populations and among the families within population in serration density but not among the populations in stomata row on both sides of the needle. The results differ from those of the third report of this series. Even if one of the reason seems to be the diversity of selected populations, it could not be confirmed definitely. The correlations between progenies and parents are not generally observed in the investigated traits of needle as shown in table 16.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.1
• /
• pp.47-53
• /
• 1995

In this paper, the characteristics of breakdown voltage($\textrm{V}_{Brms}$) -temperature(T) for air insulated power installation in flowing air with variation of T(30[$^{\circ}C$] -180[$^{\circ}C$]) are presented. To study these subjects, needle-to-needle gap in the circular pipe(inner diameter 5[cm]) are used. Also, theories of gas discharge and hydrodynamics in pipe were used to analysis for the characteristics. The $\textrm{V}_{Brms}$ is proportional to flow velocity. At high velocity, $\textrm{V}_{Brms}$ is described the saturation. At high T(180[$^{\circ}C$]), $\textrm{V}_{Brms}$ is about 4.7(kV] lower than low T(30[$^{\circ}C$]). The empirical equation obtained from this study is $\textrm{V}_{Brms}=A\times{Log[Re}+B$. Where A, B : Constant.

• Journal of Acupuncture Research
• /
• v.27 no.4
• /
• pp.67-84
• /
• 2010

Objectives : To review RCTs on acupuncture treatment for shoulder pain in order to establish a standard acupuncture treatment model in treating shoulder pain. Methods : RCT articles on traditional acupuncture treatment for shoulder pain were searched through online database. Quality of studies were assessed using the FEAS and the modified Jadad score. Results : Eighteen trials of acupuncture for shoulder pain were analyzed. Based on the results of these reviews the following factors might contribute to optimal results from acupuncture treatment. 1) Usage of LI, SI, TE meridians, usage of $LI_{15}$, $TE_{14}$, $GB_{21}$, $LI_{11}$, $LI_4$, $SI_{14}$, $LI_{14}$, $TE_{15}$ acupuncture points. 2) More than four acupuncture points should be used. 3) More than 15 minutes of needle retention time. 4) Needle length-40mm and diameter-0.30mm. 5) More than 9 times treatment 6) More than 5 weeks treatment duration. Conclusions : There was no relation between quality of article and effectiveness of acupuncture. To improve the remedial value, it is necessary to mention De-qi, stimulation of acupuncture and correct variation in diagnosis with the above-mentioned. It is better that clinical trials of acupuncture treatment is designed that type of RCT and double blind. Also when it is set that sham nonpenetrating acupuncture, no treatment group as a control group, and participants don't distinguish wheather acupuncture treatment or not, it will be more meaningful.

• Journal of Ecology and Environment
• /
• v.34 no.2
• /
• pp.215-222
• /
• 2011

We evaluated the carbon (C) and nitrogen (N) status of litterfall in a natural red pine (Pinus densiflora) stand damaged by pine wilt disease in Jinju City, which was one of the areas severely affected by the disease in Korea. A significant correlation (P < 0.05) was found between tree density and basal area and the C and N status of litterfall components, but C and N status was not correlated with mean diameter at breast height in the pine wilt disease stands. Needle-litter C and N concentrations were linearly related (P < 0.05) to basal area in pine wilt disease stands. Needle-litter C concentration decreased with a decrease in damage intensity due to pine wilt disease, whereas litter N concentration increased with an increase of basal area in pine wilt disease stands. The linear regression equations developed for litterfall C and N inputs were significant (P < 0.05), with basal area accounting for 50-86% of the variation, except for cone and flower litter. The results indicated that the incidence of pine wilt disease could impact the quality and quantity of C and N in litterfall of pine stands suffering from pine wilt disease.

• Korean Journal of Acupuncture
• /
• v.29 no.2
• /
• pp.216-223
• /
• 2012

Objectives : Electroacupuncture is widely used because of its diverse curative influence. However, its electrical safety is not guaranteed when applied on the human body. Therefore, in this study, we did research on the corrosiveness of electroacupuncture when applied on the body fluid. Methods : We did research using acupuncture needles which were made of STS304 or STS316 and which were coated or not coated in silicone. They were 0.25 mm in diameter and 40 mm in length. We immersed them to the depth of about 1cm in Hank's Solution and gave a stimulus in 120 Hz for 60 minutes. Then, we measured the pH of Hank's solution and mass of needles and observed their shape. Results : Acupuncture needles which were made of STS304 corroded more easily than those which were made of STS316 when they were applied on the human body. Acupuncture needles which were coated in silicone corroded much more easily than those which were not coated in silicone when they were applied on the body fluid. Conclusions : In this study, we did research on the corrosiveness of electroacupuncture when it is applied on the body fluid using several acupuncture needles. We made a conclusion that when acupuncture needles were applied on the body fluid, the coated one made of STS304 corrodes more easily than the uncoated one made of STS316. We hope that additional further researches on the effect of the corrosiveness of an acupuncture needle will be carried out.

• Journal of Acupuncture Research
• /
• v.21 no.1
• /
• pp.33-50
• /
• 2004

Objective: The aim of this study was to investigate anti-ischemic effect of LR1 HT8 Reduction in Acupuncture Methods: I designed to investigate whether LR1 HT8 Reduction in Acupuncture affects cerebral hemodynamics [regional cerebral blood flow(rCBF), pial arterial diameter(PAD), mean arterial blood pressure(MABP)] in normal rats and to make manifest whether LR1 HT8 Reduction in Acupuncture is mediated by cyclooxygenase or guanylate cyclase. The changes of rCBF and MABP were determinated by laser-doppler flowmetry(LDF), and the change of PAD was de terminated by video microscope and width analyzer. Results: The results were as follows; 1. LR1 Reduction in Acupuncture was increased rCBF and PAD, but decreased MABP. 2. HT8 Reduction in Acupuncture was significantly increased rCBF, but decreased MABP, and increased PAD. 3. LR1 HT8 Reduction in Acupuncture was significantly increased rCBF, PAD, but decreased MABP after withdrawing of the needle. This results suggest that LR1 HT8 Reduction in Acupuncture increased significantly rCBF by dilating PAD. 4. Pretreatment with indomethacin(1mg/kg, i,v.) was significantly inhibited LR1 HT8 Reduction in Acupuncture induced increase of rCBF and PAD, but increased LR1 HT8 Reduction in Acupuncture induced decrease of MABP after withdrawing of the needle. 5. Pretreatment with methylene blue($10{\mu}g/kg$, i,v.) was decreased LR1 HT8 Reduction in Acupuncture induced increase of rCBF and PAD, but accelerated LR1 HT8 Reduction in Acupuncture induced decrease of MABP. Conclusions: I suggest that LR1 HT8 Reduction in Acupuncture has an anti-ischemic effect through the improvement of cerebral hemodynamics, and the mechanism is mediated by cyclooxygenase.