• Korean Journal of Environmental Agriculture
• /
• v.17 no.3
• /
• pp.220-226
• /
• 1998

The effects of metalaxyl(granule), carbofuran(granule) and simazine(water soluble powder) on the soil microflora were conducted at field soil between Iksan and Chonju province. Pesticides were divided into 0.5, 1, 1.5 and 2.0 times of normal of field, respectively. The number of fluorescent Pseudomonas was ranged from $10^3$ to $10^6/g$ in both field soil treated with cabofuran. Pseudomonas concentration of Chonju field soil slowly increased and approached the maximum level at 56 day after treatment(DAT). It showed the higher at 14DAT than other DAT in Iksan field soil treated with metalaxyl or simazine, whereas it increased again at 112 DAT in metalaxyl treatment. Cabofuran treatment of both field soil showed maximum Pseudomonas number at 28 DAT compared to that of other treatments. In Chonju field soil, those Pseudomonads of metalaxyl and simazine treatment increased the highest level at 7 DAT. Simazine treatment decreased it's number from the beginning of experiment. In both soil, metalaxyl treatment decrease the general fungi number at 7 DAT, but increase at 14 and 56 DAT in Iksan field soil. However it increased at 56 DAT in Chonju field soil. Cabofuran treatment of Iksan field soil tended to decrease general fungi number at 28 DAT, but was ranged from 1.0 to $8.6{\times}104/g$ for the rest of experimental period. It started to increase at 56 DAT simazine treatment of Iksan. General bacterial concentration both soil treated with cabofuran was belong to $26.6{\sim}29.6{\times}106$. It was the highest at 56 DAT, but was not significantly different. General actinomyces number was highly increased at 7 and 112 DAT compared to that of other DAT. Pseudomonas putida or P. fluorescens from both field soil was separated and identified 10 to 30 of all 104 Pseudomonas, respectively. All isolated microorganisms showed chemical resistance of 100ppm metalaxyl, cabofuran and simazine treatment.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.1
• /
• pp.41-49
• /
• 1993

The Study was conducted to develope the low temperature tolerant methane-producing bacteria(LTTB) and to increase the efficiency of anaerobic fermentation for the treatment of agricultural and livestock wastes at low temperature. The samples were collected from muddy soil, water logged sediment, organic layer and anaerobic sludge at three latitudes, $34.8{\sim}37.4\;^{\circ}N(Korea)$, $41.4\;^{\circ}N(USA)$ and $54.5{\sim}56.9\;^{\circ}N(Canada)$. They were used for determination of the methanogenesis rates for isolation and identification of the LTTB. The methanogenesis rate of smaples at low temperature were higher in the cellulose medium than methanol medium. The methanogenesis rate in the samples of subarctic region were $15{\sim}19$ moles/ml during 30 days at low temperature($8\;^{\circ}C$), whereas not detected in the samples of temperate region. The methanogenesis rate in the enrichment culture of subarctic samples were inhibited by the $40\;{\mu}g/ml$ of streptomycin + vancomycin or ampicillin + oleandomycin which were not effect to the methanogens. An inhabitation of high temperature tolerant methane producing bacteria was identified in the samples of temperate region, whereas that of the LTTB growing at $8{\sim}13^{\circ}C$ was identified in the subarctic region.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.173-185
• /
• 2018

Effects of three different types of dispersions and flow improving additives composed with fatty acid esters, fatty acid metal salts and amide compound on the vulcanization and the mechanical properties properties of rubber compounds of EPDM and carbon black as fillers. were investigated using Mooney viscometer, moving die rheometer, hardness tester, and universal test machine. The aging characteristics of vulcanized EPDM compounds were also investigated. The Mooney viscosity measured at $125^{\circ}C$ showed a tendency to decrease in the order of amide type> metal salt type > ester type additive. Scorch time showed little or no difference with the addition of ester or metal salt type additives, but the amide type additive shortened a scorch time more than one minute. Rheological measurement data obtained at $160^{\circ}C$ showed that the vulcanization time was faster for metal salt type and amide type additive systems. Delta torque values of EPDM compound increased with metal salt type and amide type additives, but slightly decreased with ester type additive. The tensile strength of the EPDM compound was greatly improved when an ester type additive was added, but the amide type or metal salt type additive had no significant effect. The elongation was significantly improved for metal salt type additive, while the rest were not significantly affected. The tear strength of the EPDM compounds increased with the addition of all kinds of additives, and it increased remarkably in the case of metal salt type additive. Hardness of the EPDM compounds was nearly same value regardless of additive types. The thermal aging of the EPDM blend at $100^{\circ}C$ for 24 h showed little change in the case of metal salt type or amide type additive, but the elongation tends to decrease by 10-20% for all EPDM compounds containing additives.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.4
• /
• pp.241-250
• /
• 1992

This study was covered the amount of food consumed per day as well as methods estimating the daily food consumption per fish of Agrammus agrammus in natural population to understand flow of food organisms among trophic levels in bio-community of the coastal waters, Shinsudo, Samchonpo. The estimating formulas were induced from the mathematical models that representing the diurnal fluctuation of the stomach fullness of the fish. The daily food consumption could be estimated by both feeding rates and gastric evacuation rates, but it was more reasonable method that based on gastric evacuation rates than feeding rates. The daily food consumption in wet weight per fish by gastric evacuation rates were 1.9856g/day, 3.4725g/day, 4.4418g/day, 5.8168g/day, and 7.2113g/day in the order of age groups from 0 to 4. The daily rations as percentage of body weight were $9.35\%,\;6.65\%,\;5.76\%,\;4.72\%\;and\;5.31\%$ in the order of ages. The daily food consumption was proportional to the body weight of fish, but the daily food consumption per specific body weight was reciprocal to the body weight. Annual food consumption in wet weight. per fish by gastric evacuation rates were 529.98g from the age of 0.25 to 1.0, 1,269.28g from the age of 1.0 to 2.0, 1,622.76g from the age of 2.0 to 3.0, 2,125.57g from the age of 3.0 to 4.0, 1,316.09g from the age of 4.0 to 4.5 The amount of food consumed per fish during 4.25 years, from the age of 0.25 to 4.5, was 6,863.68g in wet weight. the relationships between the daily food consumption(Dr) by gastric evacuation rates and the total length(L, cm) or the body weight(W, g) were as follows: $$Dr=0.036L^{1.702}$$ $$Dr=0.254W^{0.664}$$

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.316-322
• /
• 2010

The research attempted to develop a wood adhesive based on waste cooking oil, using ozonification technology for the chemical structure modification. The waste cooking oil (WCO) was reacted with $O_3$ for different times; 1 h, 2 h, and 3 h. The chemical structure modifications of the ozonized WCOs were examined by Fourier transform Infrared (FT-IR) spectrum. The FT-IR spectrum of WCO had an absorbance peak at 3,010 $cm^{-1}$ that was the characteristic peak of the unsaturated double bonds. As ozone treatment time increased, the peak of the double bond was disappeared and carboxyl peak appeared at 1,700 $cm^{-1}$. Especially, the double bond of 3 hrs-ozonized WCO was vanished almost. In results of the dry bonding strengths of the 3 hrs-ozonized WCO mixed with polymeric methylene diphenyl diisocyanate (pMDI) were the strengths of weight ratio of 3hrs-ozonized WCO : pMDI, 1 : 0.5, 8.08 kgf/$cm^2$, 1 : 0.75, 9.53 kgf/$cm^2$ 1 : 1, 44.16 kgf/$cm^2$, 1 : 2, 58.08 kgf/$cm^2$, 1 : 3, 61.41 kgf/$cm^2$, and 1 : 4, 46.95 kgf/$cm^2$. Therefore, it was found that the optimum equivalent ratio was formed at the ratio of 1 : 2 or 1 : 3. Under wetting the bonding strength of 1 : 3 ratio was appeared higher than that of 1 : 2 ratio, while the results obtained from hot-water and cyclic boiling shear test were similar.

• The Korean Journal of Air & Space Law and Policy
• /
• v.5
• /
• pp.101-118
• /
• 1993

Generally there is no law and liability system which applies particulary to commercial space ventures. There are several international treaties and national statutes which deal with space ventures, but their impact on the liability of commercial space ventures has not been significant. Every state law in the United States will impose both tort and contract liability on those responsible for injuries or losses caused by defective products or by services performed negligently. As with the providers of other products and services, those who participate in commercial space ventures have exposure to liability in both tort and contract which is limited to the extent of the resulting damage The manufacturer of a small and cheap component which caused a satellite to fail to reach orbit or to operate nominally has the same exposure to liability as the provider of launch vehicle or the manufacturer of satellite into which the component was incorporaded. Considering the enormity of losses which may result from launch failure or satellite failure, those participated in commercial space ventures will do their best to limit their exposure to liability by contract to the extent permitted by law. In most states of the United States, contracts which limit or disclaim the liability are enforceable with respect to claims for losses or damage to property if they are drafted in compliance with the requirements of the applicable law. In California an attempt to disclaim the liability for one's own negligence will be enforceable only if the contract states explicitly that the parties intend to have the disclaimer apply to negligence claims. Most state laws of the United States will refuse to enforce contracts which attempt to disclaim the liability for gross negligence on public policy grounds. However, the public policy which favoured disclaiming the liability as to gross negligence for providers of launch services was pronounced by the United States Congress in the 1988 Amendments to the 1984 Commercial Space Launch Act. To extend the disclaimer of liability to remote purchasers, the contract of resale should state expressly that the disclaimer applies for the benefit of all contractors and subcontractors who participated in producing the product. This situation may occur when the purchaser of a satellite which has failed to reach orbit has not contracted directly with the provider of launch services. Contracts for launch services usually contain cross-waiver of liability clauses by which each participant in the launch agrees to be responsible for it's own loss and to waive any claims which it may have against other participants. The crosswaiver of liability clause may apply to the participants in the launch who are parties to the launch services agreement, but not apply to their subcontractors. The role of insurance in responding to many risks has been critical in assisting commercial space ventures grow. Today traditional property and liability insurance, such as pre-launch, launch and in-orbit insurance and third party liability insurance, have become mandatory parts of most space projects. The manufacture and pre-launch insurance covers direct physical loss or damage to the satellite, its apogee kick moter and including its related launch equipment from commencement of loading operations at the manufacture's plant until lift off. The launch and early orbit insurance covers the satellite for physical loss or damage from attachment of risk through to commissioning and for some period of initial operation between 180 days and 12 months after launch. The in-orbit insurance covers physical loss of or damage to the satellite occuring during or caused by an event during the policy period. The third party liability insurance covers the satellite owner' s liability exposure at the launch site and liability arising out of the launch and operation in orbit. In conclusion, the liability in commercial space ventures extends to any organization which participates in providing products and services used in the venture. Accordingly, it is essential for any organization participating in commercial space ventures to contractually disclaim its liability to the extent permitted by law. To achieve the effective disclaimers, it is necessary to determine the applicable law and to understand the requirements of the law which will govern the terms of the contract. A great deal of funds have been used in R&D for commercial space ventures to increase reliability, safety and success. However, the historical reliability of launches and success for commercial space ventures have proved to be slightly lower than we would have wished for. Space insurance has played an important role in reducing the high risks present in commercial space ventures.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.2
• /
• pp.201-219
• /
• 2014

The Republic of Korea in the real economy to a knowledge economy, and a center of creativity and imagination in the creative economy is changing the paradigm. As the core of creating economic, creative industries with the technology and information play an important role in the industry individuals. In order to solve the problem of the polarization of the economy and high youth unemployment rate of Korea, to recognize the role of the creative industries, as objection part, dimensions pan-national and one creative companies in industries of Mobile Apps various policies that support has been promoted. Support these policies to be able to contribute to the establishment of the success of mobile apps one-person creating company, we performed this study targeting one-person company that creates mobile apps area, we conducted a demonstration study of success factors, and thus more effective and efficient in an attempt to seek out support measures. In this study, we derive a research 4 hypothesis about the success factors of one creative enterprise through literature discussion, a study was made on the basis of empirical data of one-person company that creates mobile apps. The results of the analysis, first, if the development rate of the mobile application technology is fast and a new competition associated product is appeared, it was possible to find a tendency to be higher at the performance quantitative companies. Second, if the founder is a founding for the benefit and rewarding work and come to terms with the risk, it was possible to discover tends to be higher achievement quantitative. Third, if one-person company select a target market with capture intensively, it was possible to find a tendency for higher qualitative results. Fourth, it could be found that the reliability of the contact frequency of the network related performance business environment these characteristics enterprise management strategy and act as a significant modulatory effect. Provision of information relating to management and entrepreneurship education to be one creative enterprise is required, these results suggest that there is a provision continuing need for the opportunity to be able to meet and network and reliable variety have. In this study, to take advantage to promote the elimination measures that can increase the likelihood of success of the company of institutions to support one company that creates knowledge-based, such as in the field of mobile application.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.221-228
• /
• 2012

Physicochemical properties of liquid fertilizer samples of resource organization, which are domestically produced and distributed, are analyzed. Major contents of the research results are as follows. 1. The ratio of complete decomposition for liquid fertilizer is 49% at Public Resource Center and 33% at Liquid Fertilizer Supply Center. The combined ratio of both half-decomposed and un-decomposed liquid fertilizers is over 50% at both centers. 2. The ratio of complete decomposed liquid fertilizer, 67%, is the highest in Gangwon and Gyeonggi-do area. The ratio of un-decomposed liquid fertilizer is high in Chungbuk and Chungnam area. The sum of ratios of the half- and un-decomposed is over 60% in the areas except Gyeonnggi-do and Gangwon-do. 3. As a result of regional comparison of the physicochemical properties of liquid fertilizers, concentration variation in most of the items are large, and the degree of uniformity is found to be considerably low. In particular, concentration variation in T-N and $NH_4$-N is the most noticeable. 4. The items that physicochemically correlated to the degree of decomposition of liquid fertilizer are appeared to be T-N, $NH_4$-N, $NO_3$-N, EC, $SCOD_{Mn}$, and ORP. 5. The physicochemical average values of the liquid fertilizer estimated as "complete decomposed" are appeared to be T-N 829 mg/L,$NH_4$-N 517 mg/L, $NO_3$-N 151 mg/L, $SCOD_{Mn}$ 1,205 mg/L, EC 10.32 mS/cm, ORP -117.12 mV.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.251-262
• /
• 2009

In this research dairy cattle barn facilities what are 4,198 houses hold over 50 heads were surveyed by scale and province. Full-time farms hold over 50 heads breed total 344,514 heads. Each of Farms holds 50 to 99 heads were 79.8 percent and breed average 82.1 heads. Dairy cattle barns were constructed september 1995 averagely. Each of barns have $1,740.0\;m^2$ scale. The construction type of dairy cattle barn was almost litter barn type 84.0%, freestyle type 5.1%, mooring+litter ground type 17.3% and other types 4.4%. The litter barn type was popular in small farms. But in large farms, freestyle type was popular than small farms. The construction type of dairy cattle barn was almost litter barn type 84.0%, freestyle type 5.1%, moohng+ltter ground type 17.3% and other types 4.4%. Type of dairy cattle robotic milking system was pipeline 41.5%, herringbone 22.8% and tandem 35.8%. The pipeline type was popular in small farms which have 50~99 heads. But in large farms which have over 200 heads, tandem type was popular than small farms. Proportion of floor type of dairy cattle barn was almost litter type 94.9%. Scraper type was popular in large farms than in small farms. Proportion of roof type of dairy cattle barn was slate 32.5%, vinyl 16.3%, sunlight 11.1%, panel 10.9, zinc plate 8.8 and steel plate 8.3%. Roof type was lots of slate type before 1995. But vinyl type is increasing after 1995. Proportion of wall type of dairy cattle barn was almost open type 83.3% and winch-curtain 26.8%. Utilization period of dairy cattle barn was 9.2 years about milker, 7.9 years about automatic feeder, 9.2 years about waterer and 10.4 years about electric facilities. In this results, there were lots of improvements about automatic feeder.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.231-240
• /
• 2009

In this research pig house facilities what are 3,029 houses hold over 1000 heads were surveyed by scale and province. Full-time farms hold over 1000 heads breed total 7,229,892 heads. And farms breed 2,386.9 heads averagely. Pig houses were constructed august 1995 averagely. Each of houses have $3,017.2\;m^2$ scale. The construction type of pig house was winch-curtain type 77.2% which was most popular, confined type 51.3%, litter type 7.4% and loft type 4.6%. The winch-curtain type was popular than windowless type in pig farms which have 1,000-1,999 heads. But pig house construction type which have more than over 10,000 heads was windowless type more than winch-curtain type. Manure removing type was slurry 72.3% and scraper 38.5% in farms which have 1,000-1,999 heads. Manure removing type was slurry 83.3% in farms which have over 10,000 heads. Proportion of roof type of pig house was slate 51.2%, panel 46.1%. But in middle or small farms, slate type was only 25.0%. Proportion of wall type of pig house was 41.9%, block 21.9%, concrete 7.6%, winch-curtain 6.3%, and bnck 5.9%. Ventilation type of pig house was natural winch 46.1%, mechanical windowless 69.8% and mixed type 53.1%. So, mechanical windowless type was popular than natural winch type. Especially the farm scale is bigger the mechanical widowless type was more. Utilization period of pig house was 8.1 years about automatic feeder, 8.3 years about waterer, 8.2 years about electric facilities and 9.0 years about floor material. Thus, almost of facilities were used at least 8 years.