• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.149-153
• /
• 1997

We demonstrate the operating characteristics(center wavelength, bandwidth, TE/TM polarization, tuning range) of grating-assisted co-directional coupler(GACC) filter fabricated with InGaAsP compound semiconductor. A design of waveguide structure has been focused on the narrow bandwidth characteristics of the filter. Reactive ion etching technique was employed for the uniform waveguide formation. The bandwidths(FWHM) and center wavelengths of the fabricated GACC filter were measured by 1.5 nm and 1530.6 nm for TE polarization and 1.3 nm and 1494.0 nm for TM polarization. This is the one of the narrowest bandwidth at 1530 nm region ever reported. The center wavelength shifted form 1530 nm to 1538 nm when the current of 100 mA was injected at 4.5 mm-long device. Good agreement between the designed and measured operating characteristics for some waveguide structures is demonstrated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1208-1213
• /
• 2010

In this paper, a microstrip balun-BPF of slotted-square-patch type is proposed. The conventional balun-BPF has some drawbacks of narrow bandwidth and high insertion loss. In order to improve these weak points, we used a square patch in designing balun-BPF on which two slots intersecting perpendicularly and one corner-edge perturbation are adopted. This structure allows one of the most effective use of the patch space so that the insertion loss can be decreased. Changing the slot lengths is use to control the operating frequency and the bandwidth of the balun-BPF. A fabricated balun-BPF shows wide bandwidth of 300 MHz(12.7 %), small insertion loss of 0.56 dB, phase difference of $184^{\circ}{\pm}15^{\circ}$ and amplitude imbalances of within 1 dB between two output ports at 2.4 GHz band.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.2
• /
• pp.47-55
• /
• 2003

In this paper, the performance of DS-CDMA system with smart antenna is analyzed for different bandwidths (1.25MHz,5MHz) and different channel environments (rural, urban) in wideband multipath channel. For the analysis of smart antenna system, the vector channel having the spatio-temporal correlation is modeled as a time-variant linear filter in time, and each multipath is assumed as a reflective wave from only one direction (only one cluster) in space. Several multipath is within one chip are distingushed into each one and the strongest signal is selected, DS-CDMA system with smart antenna using wider bandwidth present better performance than that using narrow bandwidth. It is shown that the smart antenna is more effective in urban area when using 2D-RAKE receiver.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.855-862
• /
• 2003

This paper suggests the PIFA structure modified antenna in which short-circuit plate is located between planar element and ground plane, in order to solve the problem of narrow band of existing internal antenna, PIFA. It is also suggested that internal antenna has the perturbation in the patch to broaden the frequency bandwidth. It is possible that the antenna is installed into the mobile telephone with a low profile condition(h=0.015 λ) to use internally, and acquired desired bandwidth(5.2 %) through double resonance structure, remodeling the PIFA that is already well-known as an internal antenna. This paper investigated how characteristic is affected by the feeding point(Yf, Zf), short strip plate(Zs), short strip width(Ws), perturbation width(w), length(d), short plate height(h), dielectric($\varepsilon$$\_$r/) to be slim type antenna. It is compared with existing PIFA bandwidth, and is suggested pattern as the H.E plane. It is simulated using the Microwave Studio of the CST Inc. based on FIM(Finite Integration Method) method and analyzed antenna characteristic following the variation each parameters. The result proved the practical use of PIFA antenna by comparing the measured and simulated data of the antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1391-1401
• /
• 2007

This paper proposed a novel broadband printed monopole antenna for PCS/IMT-2000/WLAN terminals. Frequency characteristics are optimized with various design parameters. Two Z-shaped patchs were utilized in order to improve the characteristics of a printed monopole antenna which usually has a narrow bandwidth. The bandwidth of the realized antenna is $1.590{\sim}2.614$ GHz(48.43 %) below the return loss of -10 dB which contain the required bandwidth of PCS/IMT-2000/WLAN band. The simulated and measured values of 1 g and 10 g averaged peak SAR on human head caused by the proposed antenna on folder-type phone were analyzed and discussed. As a result, the measured 1 g peak SAR value is 0.794 W/kg and 10 g peak SAR value is 0.368 W/kg at 1.8 GHz. The results are smaller than the reference SAR limit values that are respectively 1.6 W/kg and 2 W/kg on 1 g and 10 g averaged SAR values.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1033-1038
• /
• 2022

In this paper, the design of a printed dipole antenna fed by broadside coupled striplines (BCS) for the 3.5GHz band is described. The two fins of the bow tie are, respectively, on the two sides of the substrate. The feeding balanced lines adopted for 1×2 array are the BCS. The obtained numerical results are in good agreement with experimental data. Through experiments with printed dipole antennas of various extended angles, the printed dipole antenna exhibits the wide bandwidth in the desired frequency band, which has a bandwidth of 28% for VSWR < 2.0 : 1. And within this bandwidth, This printed dipole antenna achieves a stable radiation pattern. It is found that the narrow band and feeding for array characteristic which is a disadvantage of the conventional printed dipole antenna can be improved. The radiation pattern showed omnidirectional characteristics and the maximum gain was about 4.4dBi.

• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.363-370
• /
• 2023

Various earth observation satellites need to provide accurate and high-quality data after launch. To maintain and enhance the quality of satellite data, it is crucial to employ a cross-calibration process that accounts for differences in sensor characteristics, such as the spectral band adjustment factor (SBAF). In this study, we utilized Landsat-8 and Sentinel-2A satellite imagery collected from desert sites in Libya4, Algeria3, and Mauritania2 among pseudo-invariant calibration sites to calculate and apply SBAF, thereby compensating the uncertainties arising from variations in bandwidths. We quantitatively compared the reflectance differences based on the similarity of bandwidths, including Blue, Green, Red, and both the near-infrared (NIR) narrow, and NIR bands of Sentinel-2A. Following the application of SBAF, significant results with reflectance differences of approximately 1% or less were observed for all bands except NIR. In the case of the Sentinel-2A NIR band, it exhibited a significantly larger bandwidth difference compared to the NIR narrow band. However, after applying SBAF, the reflectance difference fell within the acceptable error range (5%) of 1-2%. It indicates that SBAF can be applied even when there is a substantial difference in the bandwidths of the two sensors, particularly in situations where satellite utilization is limited. Therefore, it was determined that SBAF could be applied even when the bandwidth difference between the two sensors is large in a situation where satellite utilization is limited. It is expected to be helpful in research utilizing the quality and continuity of satellite data.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.211-215
• /
• 1997

Localized communication networks for office automation, security monitoring, environmental management of buildings, computer communications, and other applications enjoy every increasing demand. This paper proposes a direct sequence spread spectrum communication system for use in power line data transmission. Advantages of power distribution circuits include reasonably universal coverage and easy access vis a standard wall plug. Disadvantages include limited communication bandwidth, relatively high noise levels, and varying levels of impedance, noise, and attenuation. Spread spectrum signalling provides immunity to narrow-band signal impairments and multiplexing capability. Our prototype power line communication module supports completely physical and data link layers based on the international standard ISO 10368 for reliable high-speed power line communication system. Moreover it provides useful functions to compose a plant monitoring and control system. All the circuits of the communication module are included in one compact circuit. Thus a functional communication system for the power line plant monitoring and control is implemented.

• Journal of electromagnetic engineering and science
• /
• v.13 no.1
• /
• pp.34-37
• /
• 2013

This paper presents a novel ultra-wideband (UWB) antenna that rejects narrow and broad bands and is suitable for wireless communications. The base of the proposed antenna has a circular patch that can cover the UWB frequency range (3.1~10.6 GHz). The interference issues caused by co-existence within the UWB operation frequency are overcome by a design that uses a parallel-coupled asymmetric dual-line with a circular monopole antenna. The proposed antenna showed a stable radiation pattern, realized gain and reflection coefficient lower than -10 dB across the UWB operation bandwidth except for 5.15~5.85 GHz and 7.25~8.4 GHz. The fabrication, simulation, and measurement results obtained for the proposed antenna were in good agreement with the expected values.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.924-931
• /
• 2016

In this paper, Various network adaptive MAC scheduling technique is proposed to effectively overcome limits of narrow bandwidth and low transmission speed in underwater. UPFC(Underwater Packet Flow Control) is a technique to reduce both the number of transmission and transmission time using three types (Normal, Blocked, Parallel) of data transmission. In this technique, the load information, in which a transmission node have, is transmitted to destination node using marginal bit in reserved header. Then the transmitted information is referred to determine weighting factor. According to the weighting factor, scheduling is dynamically changed adaptively. The performance of UPFC is analyzed and flow control technique which can be applied to Cluster Based Network and Ad Hoc network as well.