• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.168-170
• /
• 2005

Nickel base brazes containing boron and silicon as melting point depressants are used extensively in the joining and repair of hot-section components in next generation nuclear reactor and aero-engine. Therefore, the present study has investigated the preliminary applicability of nickel based alloying nano powders. Nano Ni-based alloying powders synthesized by Pulsed Wire Evaporation (PWE) method. It's powder morphology and phase transformation temperature were analyzed by scanning electron microscopy, transmission electron microscopy, and differential scanning calorimeter(DSC). The powder particle size was approximately 10${\sim}$100nm and exhibits a quite even equiaxed shape. The results of DSC measurement show that both the nano Inconel 625 nano powder and Inconel 718 nano powder presents similar liquidus temperatures approximately $1373^{\circ}C$ and $1380^{\circ}C$ respectively.

• 폴리머
• /
• 제29권1호
• /
• pp.1-7
• /
• 2005

상호 침투하는 고분자 가교구조(IPN)는 가교 고분자의 블렌드라고 볼 수 있다. IPN의 큰 특징 중의 하나는 IPN 합성 중 모폴로지의 조절이 가능하다는 점으로 반응속도와 상 분리 속도의 상대적인 크기에 따라 모폴로지의 조절이 가능하고 따라서 나노미터 크기의 분산상도 얻을 수 있고 상호연속 상(co-continuous phase)도 얻을 수 있다. 또 하나의 중요한 특징은 IPN 구조에 존재하는 가교구조 사이의 물리적 얽힘때문에 한번 형성된 모폴로지는 주위 환경에 관계없이 변하지 않는다는 점이다. 친수성 폴리우레탄과 소수성 폴리스티렌의 결합을 IPN 형태로 하면 표면에 친수성과 소수성 도메인이 공존하게 되고 이러한 표면이 우수한 혈액 적합성을 보인다. IPN 합성시 반응온도, 반응압력, 가교밀도 등을 변화시켜 소수성 폴리스티렌 도메인의 크기를 변화시키고 이에 따른 혈액 적합성의 변화를 연구하였다.

• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1069-1074
• /
• 2005

In this work, nano-needle structures ate formed to solve problem, related to low density of quantum dots for nano floating gate memory. Such structures ate fabricated and electrical properties' of MIS devices fabricated on the nano-structures are studied. Nano floating gate memory based on quantum dot technologies Is a promising candidate for future non-volatile memory devices. Nano-structure is fabricated by reactive ion etching using $SF_6$ and $O_2$ gases in parallel RF plasma reactor. Surface morphology was investigated after etching using scanning electron microscopy Uniform and packed deep nano-needle structure is established under optimized condition. Photoluminescence and capacitance-voltage characteristics were measured in $Al/SiO_2/Si$ with nano-needle structure of silicon. we have demonstrated that the nano-needle structure can be applicable to non-volatile memory device with increased charge storage capacity over planar structures.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.62-68
• /
• 2012

Cellulose was electrospun over water collector and the cellulose solution was prepared using N-methyl-morpholine N-oxide/water(nNMMO/$H_2O$). The morphology of electrospun cellulose was investigated by scanning electron microscopy (SEM). SEM images showed that the fiber formation depended on processing parameters such as solution concentration, applied electric field strength, solution feeding rate and temperature of water in coagulation bath. High concentration, low temperature of water bath, and low feeding rate were more favorable to obtain fiber morphology. All the variables affected on the fluidity of the cellulose solution and diffusion of NMMO. Low fluidity and fast diffuision of NMMO was critical for obtaining fiber morphology.

• 한국분말재료학회지
• /
• 제21권4호
• /
• pp.260-265
• /
• 2014

In this study, in order to increase surface ability of hardness and corrosion of magnesium alloy, anodizing and sealing with nano-diamond powder was conducted. A porous oxide layer on the magnesium alloy was successfully made at $85^{\circ}C$ through anodizing. It was found to be significantly more difficult to make a porous oxide layer in the magnesium alloy compared to an aluminum alloy. The oxide layer made below $73^{\circ}C$ by anodizing had no porous layer. The electrolyte used in this study is DOW 17 solution. The surface morphology of the magnesium oxide layer was investigated by a scanning electron microscope. The pores made by anodizing were sealed by water and aqueous nano-diamond powder respectively. The hardness and corrosion resistance of the magnesium alloy was increased by the anodizing and sealing treatment with nano-diamond powder.

• Advances in nano research
• /
• 제2권2호
• /
• pp.89-98
• /
• 2014

A novel and simple method for the synthesis of nano-magnetite particles is disclosed. In the novel procedure, $Fe^{2+}$ is the only source of metal cation. Carboxymethylcellulose (CMC) is used as the structure directing agent. The phase analysis of the nano-particles was performed using XRD and electron diffraction techniques. Size and morphology analysis was performed using light scattering and TEM techniques. The effect of $NH_4OH$ solution (32 wt. %) at different CMC concentrations on the size distribution of the final magnetite powders is studied. An optimal base concentration exists for each CMC concentration leading to minimal agglomeration. There exists a minimum CMC concentration (0.0016 wt. %), lower than that no magnetite forms. It is shown that using the new method, it is possible to immobilize a lipase enzyme (Candida Rugosa) with immobilization efficiency larger than 98 % with a loading more than 3 times the reported value in the literature. The latter phenomenon is explained based on the agglomerate state of the nano-particles in the liquid phase.

• 한국포장학회지
• /
• 제23권2호
• /
• pp.67-74
• /
• 2017

In this work, the effects of nano $TiO_2$ on functionality and stability of low density polyethylene (LDPE) composite films were investigated for food packaging application. LDPE-nano $TiO_2$ composite films were prepared with various $TiO_2$ contents (0, 0.5, 1.0, 3.0 and 5.0wt%) by melt-extrusion and their basic properties such as crystallinity, chemical bonds and surface morphology were examined by XRD, FTIR and SEM. Ultraviolet (UV) light barrier property of as-prepared LDPE-nano $TiO_2$ composite films was also studied and the presence of nano $TiO_2$ resulted in significant improvement of UV light barrier compared to the pure LDPE film. To evaluate influence of nano $TiO_2$ on LDPE properties required as packaging material, thermal, mechanical, gas barrier and optical properties of LDPE-nano $TiO_2$ composite films were characterized with various analytical techniques including TGA, UTM, OTR, WVTR and UV-vis spectroscopy. As a result, except optical property of LDPE, no significant effects were found in other properties. Opacity of pure LDPE was greatly increased with increasing concentration of nano $TiO_2$.

• 한국포장학회지
• /
• 제24권1호
• /
• pp.27-34
• /
• 2018

In this work, nano ZnO was introduced into low density poly ethylene (LDPE) composites films with various contents (0, 0.5, 1.0, 3.0 and 5.0 wt%) by melt-extrusion. Their basic properties such as crystallinity, chemical bonds and surface morphology were examined by XRD, FTIR and SEM. XRD patterns and FTIR peaks intensity were increased in proportion to the ZnO contents. SEM images showed well dispersed nano ZnO in LDPE composite films. Antimicrobial functionality of LDPE-nano ZnO composite films was also studied and the presence of nano ZnO resulted in significant improvement of antimicrobial functionality compared to the pure LDPE film. To evaluate influence of nano ZnO on LDPE properties required as packaging material, thermal, mechanical, gas barrier and optical properties of LDPE-nano ZnO composite films were characterized with various analytical techniques including TGA, UTM, OTR, WVTR and UV-Vis spectroscopy. As a result, except optical and mechanical properties of LDPE, no significant effects were found in other properties. Opacity of pure LDPE was greatly increased with increasing concentration of nano ZnO and tensile strength was also improved at 0.5wt% ZnO content.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1699-1702
• /
• 2012

$TiO_2$ nanostructures with various morphologies like cubes, spheres, hexahedral pillars and spherical tubes were synthesized by microwave-assisted hydrothermal process. Each structure was obtained by changing the relative concentrations of titanium tetraisoproxide (TTIP), tetrabutylammonium hydroxide (TBAH) and ethanol. Scanning electron microscopy (SEM), transmission electoron microscopy (TEM), X-ray diffraction and Brunauer-Emmett-Teller (BET) surface area analysis were used to characterize the synthesized $TiO_2$ nanostructures. From these results, it has been proved that $TiO_2$ structure could be controlled to have specific morphology, size, surface area, pore volume and pore size distribution.

• International Journal of Concrete Structures and Materials
• /
• 제4권1호
• /
• pp.37-43
• /
• 2010

Theoretical models based on modern interpretations of the morphology and interactions of cement hydration products are developed for prediction of the mechanical properties of hydrated cement paste (hcp). The models are based on the emerging nanostructural vision of calcium silicate hydrate (C-S-H) morphology, and account for the intermolecular interactions between nano-scale calcium C-S-H particles. The models also incorporate the effects of capillary porosity and microcracking within hydrated cement paste. The intrinsic modulus of elasticity and tensile strength of hydrated cement paste are determined based on intermolecular interactions between C-S-H nano-particles. Modeling of fracture toughness indicates that frictional pull-out of the micro-scale calcium hydroxide (CH) platelets makes major contributions to the fracture energy of hcp. A tensile strength model was developed for hcp based on the linear elastic fracture mechanics theories. The predicted theoretical models are in reasonable agreements with empirical models developed based on the experimental performance of hcp.