• Journal of Communications and Networks
• /
• 제17권3호
• /
• pp.296-305
• /
• 2015

Coupled schemes between service-oriented architecture (SOA) and Web 2.0 have recently been researched. Web-based content providers and telecommunications company (Telecom) based Internet protocol television (IPTV) providers have struggled against each other to accommodate more three-screen service subscribers. Since the advent of Web 2.0, more abundant reproduced content can be circulated. However, because according to increasing device's resolution and content formats IPTV providers transcode content in advance, network bandwidth, storage and operation costs for content management systems (CMSs) are wasted. In this paper, we present a user centric CMS for open IPTV, which integrates SOA and Web 2.0. Considering content popularity based on a Zipf-like distribution to solve these problems, we analyze the performance between the user centric CMS and the conventional Web syndication system for normalized costs. Based on the user centric CMS, we implement a social Web TV with device-aware function, which can aggregate, transcode, and deploy content over social networking service independently.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.313.1-313.1
• /
• 2013

현재 결정질 실리콘 태양전지의 전 후면 전극의 형성은 스크린 프린팅 방법이 주를 이루고 있다. 스크린 프린팅 방법은 쉽고 빠르게 인쇄가 가능한 반면 단가가 높고 금속 페이스트에 첨가된 여러 혼합물에 의해서 전극과 기판 사이의 저항이 크다는 단점이 있다. 본 논문에서는 스크린 프린팅 방법으로 태양전지의 seed layer를 인쇄하고, Cu도금을 진행함으로써 태양전지의 전기적 특성을 비교하였다. 주요 전극 형성을 Cu 도금을 사용함으로써 전극과 기판사이의 저항을 감소시키고 값비싼 Ag페이스트를 값싼 Cu로 대체함으로써 가격을 낮출 수 있는 장점이 있다. 실험에 사용된 Si 웨이퍼 특성은 $156{\times}156$ mm2, 200 ${\mu}m$, 0.5-3.0 ${\Omega}{\cdot}cm$ and p-type 웨이퍼를 사용하였다. 웨이퍼는 표면조직화, p-n접합 형성, 반사방지막 코팅을 하였으며 스크린 프린팅 방법을 이용해 전 후면 전극을 인쇄하고 열처리 과정을 통해 전극을 형성하였다. 이 후 전면에 Cu도금을 실행하여 태양전지를 완성하였다. 완성된 태양전지는 솔라 시뮬레이터 및 TLM패턴을 이용하여 전기적 특성을 분석하였으며, SEM과 linescan, 광학현미경 등을 이용하여 전극을 분석하였다.

• 센서학회지
• /
• 제32권6호
• /
• pp.412-417
• /
• 2023

There is increasing interest in the rapid and highly sensitive monitoring of cell viability in biological and toxicological research. Conventional methods depend on optical assays using Water Soluble Tetrazolium-8 (WST-8) or 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide (MTT) assay, which requires a large volume of samples and special instruments, necessitating shipment of clinical samples to laboratories. This paper reports on the development of a rapid and sensitive electrochemical (EC) sensor using screen printed electrode (SPE) and surface modification using 4'-mercapto-N-phenylquinone diamine (4'-NPQD), as double electron mediators, for monitoring cell viability via the measurement of nicotinamide adenine dinucleotide (NADH). We used the sensor to observe the viability of MCF-7 and doxorubicin (Dox)-treated cells. The oxidation current of NADH was measured via chronoamperometry (CA), and the EC results showed a good linear relationship when compared with NADH quantification using WST-8 assay. The analysis time was only 10 s and limit of detection (LOD) of NADH was 1.78 µM. Our EC method has the potential to replace conventional WST assays for cell viability and cytotoxicity experiments.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.48-53
• /
• 2001

Carbon nanotube emitters, prepared by screen printing, have demonstrated a great potential towards low-cost, largearea field emission displays. Carbon nanotube paste, essential to the screen printing technology, was formulated to exhibit low threshold electric fields as well as an emission uniformity over a large area. Two different types of triode structures, normal gate and undergate, have been investigated, leading us to the optimal structure designing. These carbon nanotube FEDs demonstrated color separation and high brightness over 300 $cd/m^2$ at a video-speed operation of moving images. Our recent developments are discussed in details.

• 분석과학
• /
• 제29권1호
• /
• pp.35-42
• /
• 2016

A new nano-composite carbon ink for the development of disposable dopamine (DA) biosensors based on screen-printed carbon electrodes (SPCEs) is introduced. The method developed uses SPCEs coupled with a tyrosinase modified nano-composite carbon ink. The ink was prepared by an “in-house” procedure with reduced graphene oxide (rGO), Pt nanoparticles (PtNP), and carbon materials such as carbon black and graphite. The rGO-PtNP carbon composite ink was used to print the working electrodes of the SPCEs and the reference counter electrodes were printed by using a commercial Ag/AgCl ink. After the construction of nano-composite SPCEs, tyrosinase was immobilized onto the working electrodes by using a biocompatible matrix, chitosan. The composite of nano-materials was characterized by X-ray photoelectron spectroscopy (XPS) and the performance characteristics of the sensors were evaluated by using voltammetric and amperometric techniques. The cyclic voltammetry results indicated that the sensors prepared with the rGO-PtNP-carbon composite ink revealed a significant improvement in electro-catalytic activity to DA compared with the results obtained from bare or only PtNP embedded carbon inks. Optimum experimental parameters such as pH and operating potential were evaluated and calibration curves for dopamine were constructed with the results obtained from a series of amperometric detections at −0.1 V vs. Ag/AgCl. The limit of detection was found to be 14 nM in a linear range of 10 nM to 100 µM of DA, and the sensor’s sensitivity was calculated to be 0.4 µAµM⁻¹cm⁻².

• 조명전기설비학회논문지
• /
• 제14권1호
• /
• pp.1-6
• /
• 2000

Ethyl hydroxy ethyl cellulose의 고분자를 중심으로 하는 유기 결합제를 사용하고 형광체로서 ZnS:Cu와 유전체로$BaTiO_3$ 사용해 screen printing법에 의해 신광원으로서 많은 연구 개발이 집중되고 있는 유기분산형 백라이트 EL(Electroluminescent) 소자를 제조하였다. 제조된 백라이트용 유기 분산형 EL 소자의 특성은 $25[^{\circ}C]$, 100[V], 400[Hz]에서 $1.98[mA/\m^2]$의 전류밀도, O.075[W]의 power consumption, 정전용량 7.l[nF]를 나타내었다. 소자의 휘도는 50~150[V] 사이에서 $20~110[cd/\m^2]$의 밝기를 나타내였으며, 형광체의 색상변화는 ClE에 공인된 색 좌표에 의해 x=0.1711, y=0.3676의 bluish green의 색상을 나타내었다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 추계학술발표대회
• /
• pp.1483-1486
• /
• 2013

최근 무선통신의 급격한 발전과 스마트 기기의 확산으로 인해 Tving, pooq 등 다양한 모바일 방송 서비스가 급속도로 증가하고 있다. 또한 다양한 영상처리 기법 등이 등장함에 따라 4K, 8K급의 UHD 동영상들이 속속들이 등장하고 있다. 이로 인해 트랜스코딩을 통해 가공되는 동영상의 포맷 및 해상도 또한 매우 다양해질 것으로 전망된다. 현재까지의 트랜스코딩 연구사례는 사용자의 이동환경을 고려한 안정적 QoS 보장 또는 서버의 부하를 줄이기 위한 분산처리 기법 등의 연구 위주로 진행되어 온 것이 현실이다. 하지만 상기 조건(adaptive streaming 및 서버부하 처리)들을 충족시키긴 위해선 보다 효율적인 트랜스코딩 시스템의 제공이 선행 되어야 할 것이다. 이에 따라 본 논문에서는 사용자 관점에서 보다 빨리 스트리밍 서비스를 제공 받기 위하여 우선순위 큐 알고리즘을 적용한 시스템을 설계 및 구현하였다. 검증을 위하여 4가지 콘테이너(.MOV, .FLV, .MKV, .AVI)를 실험대상으로 하였고, 비교 대상 트랜스코딩 시스템은 상용 스트리밍 서비스인 YouTube를 활용하였다. 성능 측정결과, 총 트랜스코딩 완료시간은 YouTube에 비해 41.61%로 시간이 단축되었다. 또한 모바일 TV시청자가 55%를 차지한다는 점을 고려하여 컨트롤 서버에서는 최단시간 서비스 제공을 위하여 저해상도부터 추출하여 스트리밍 서버를 통해 송출하도록 구현하였다. 본 연구결과는 트랜스코딩 성능개선 뿐만 아니라 모바일 대상자를 위한 맞춤형 서비스를 보다 빨리 제공할 수 있을 것이며, 그 수요는 점차 증대될 것으로 예상된다.

• Current Photovoltaic Research
• /
• 제9권4호
• /
• pp.128-132
• /
• 2021

Advances in screen printing technology have been led to development of high efficiency silicon solar cells. As a post PERx structure, an n-type wafer-based rear side TOPCon structure has been actively researched for further open-circuit voltage (Voc) improvement. In the case of the metal contact of the TOPCon structure, the poly-Si thickness is very important because the passivation of the substrate will be degraded when the metal paste penetrates until substrate. However, the thin poly-Si layer has advantages in terms of current density due to reduction of parasitic absorption. Therefore, poly-Si thickness and firing temperature must be considered to optimize the metal contact of the TOPCon structure. In this paper, we varied poly-Si thickness and firing peak temperature to evaluate metal induced recombination (Jom) and contact resistivity. Jom was evaluated by using PL imaging technique which does not require both side metal contact. As a results, we realized that the SiN_x deposition conditions can affect the metal contact of the TOPCon structure.

• Journal of Trauma and Injury
• /
• 제37권1호
• /
• pp.67-73
• /
• 2024

Purpose: Posttraumatic stress disorder (PTSD) is prevalent and is associated with protracted recovery and worse outcomes after injury. This study compared PTSD prevalence using the PTSD Checklist for DSM-5 (PCL-5) with the prevalence of PTSD risk using the Injured Trauma Survivor Screen (ITSS). Methods: Adult trauma patients at a level I trauma center were screened with the PCL-5 (sample 1) at follow-up visits or using the ITSS as inpatients (sample 2). Results: Sample 1 (n=285) had significantly fewer patients with gunshot wounds than sample 2 (n=45) (8.1% vs. 22.2%, P=0.003), nonsignificantly fewer patients with a fall from a height (17.2% vs. 28.9%, P=0.06), and similar numbers of patients with motor vehicle collision (40.7% vs. 37.8%, P=0.07). Screening was performed at a mean of 154 days following injury for sample 1 versus 7.1 days in sample 2. The mean age of the patients in sample 1 was 45.4 years, and the mean age of those in sample 2 was 46.1 years. The two samples had similar proportions of female patients (38.2% vs. 40.0%, P=0.80). The positive screening rate was 18.9% in sample 1 and 40.0% in sample 2 (P=0.001). For specific mechanisms, the positive rates were as follows: motor vehicle collisions, 17.2% in sample 1 and 17.6% in sample 2 (P>0.999); fall from height, 12.2% in sample 1 and 30.8% in sample 2 (P=0.20); and gunshot wounds, 39.1% in sample 1 and 80.0% in sample 2 (P=0.06). Conclusions: The ITSS was obtained earlier than PCL-5 and may identify PTSD in more orthopedic trauma patients. Differences in the frequency of PTSD may also be related to the screening tool itself, or underlying patient risk factors, such as mechanism of injury, or mental or social health.

• 한국표면공학회지
• /
• 제57권4호
• /
• pp.265-273
• /
• 2024

An amperometric sensor for measuring indole-3-acetic acid (IAA) was studied based on a screen-printed carbon electrode (SPCE) coated with a reduced graphene oxide composite electrocatalyst. The PEI-GO dispersion is uniformly formed through a nucleophilic substitution reaction between the active amine group of Polyethyleneimine (PEI) and the epoxide group exposed on the surface of graphene oxide. And The 3-dimensional PEI-rGO AG (Polyethyleneimine-reduced graphene oxide aerogel) complex was easily prepared through simple heat treatment of the combined PEI-GO dispersion. The proposed composite catalyst electrode, PEI-rGO AG/SPCE, showed a two linear relationship in the low and high concentrations in IAA detection, and the linear equation was I_pa = 0.2883C + 0.0883 (R²=0.9230) at low concentration and Ipa = 0.00464C + 0.6623 (R²=0.9894) at high concentration was proposed, and the detection limit was calculated to be 203.5nM±33.2nM. These results showed the applicability of the PEI-rGO AG composite catalyst as an electrode material for electrocatalysts for the detection of IAA.