• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.77-83
• /
• 2009

The purpose of this study was to examine the relative effectiveness of immediate feedback and informational prompt on safe sitting behaviors that may cause VDT syndromes. Participants were three white color workers and an ABCB within-subject design was adopted. Safety Posture System was developed specifically for the present study. The system could detect participants' unsafe sitting postures using sensors and provide feedback and prompt on the computer monitors. The results indicated that both immediate feedback and informational prompt considerably increased safe sitting behaviors. More importantly, the immediate feedback was more effective than the informational prompt in increasing safe sitting behaviors.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.3
• /
• pp.77-86
• /
• 2006

After conducting an investigation of a specific workplace, 372 labor workers, who are employed at a certain domestic petrochemical company valve operating and maintenance processing section, were personally questioned about specific work-related ailments. According to the results, 57% of workers who were working in the petrochemical industry have suffered from pain-related musculoskeletal disorders in, at least, more than 1 body part. Specifically, there are more than 28% of workers suffering from pain in more than two body parts. Among the total work population, 18.8 % of workers are assumed to have a high probability of being diagnosed with musculoskeletal disorder. Also, according to the RULA checklist which evaluates environmental improvement conditions of the workplace, 76.7% of workplaces among the inspected areas have high hazardous work factors that are related to musculoskeletal disorder and needs to be improved upon and observed right away or in the foreseeable future. The prior factor has a high correlation and pain rate which is due to an improper work posture. Originally, this improper work posture is caused mostly by ergonomically incorrect facility design. Furthermore, the structure of the workplace does not consider the worker's individual build.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.3
• /
• pp.91-100
• /
• 2007

The purposes of this research are to survey work-related risk factors of musculoskeletal disorders(MSDs) in various departments and tasks at general hospitals in non-manufacturing sectors, and to use basic data derived from the survey results in preventing work-related MSDs in hospital workers. Investigation started in March of 2006 and continued for 6 months in 220 general hospitals at Seoul, Incheon, Kyeongi, and Kangwon area. Investigators visited and interviewed workers in hospitals to identify the presence of tasks of musculoskeletal burden, the investigation results of ergonomic risk factors required by the Occupational Safety and Health Law, statistical analysis from questionnaire for musculoskeletal symptoms, and major departments and tasks that have such risk factors. Twenty-seven percents of hospitals finished the investigation of ergonomic risk factors, and 69% did not do the investigation while remained 4% did not have such factors in their hospitals. The rank order of major departments that had such musculoskeletal burdens was kitchen rooms of 143, managing departments/computer rooms/dispensaries of 137, physical treatment rooms of 109, nursing departments of 96, radiological and clinical laboratories of 63. Eighteen hospitals that did not hold legal duties by the section 148 of labor minister decree practiced prevention programs of MSDs according to the labor-management cooperation. Nursing departments ranked in the first place for the numbers of musculoskeletal symptoms of 438. Managing departments/computer rooms/dispensaries, kitchen rooms, and medical treatment departments held 127, 52 and 45 symptoms, respectively. The magnitude order of physical symptom areas followed shoulder of 185, backs and waist of 166, hand wrists of 120, necks of 110, and legs/feet of 106. The departments and jobs that had major work-related ergonomic risks were patient transporting, central supplying, patient nursing (moving patients into wheel-chairs, changing of patient posture and sheet alteration), manual transporting, operation, and managing/computer departments.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.3
• /
• pp.121-134
• /
• 2004

A research project was conducted to study work-related musculoskeletal disorders （MSDs） at subway train repair plant in Korea. The project was consisted of 4 main parts; education on the topics of MSDs for all workers, symptom survey, medical check-up, investigation of MSD risk factors. The result of symptom survey showed that 95.2％ of the respondents complained pains on at least one part of the body. After cross-sectional analysis of various information and risk factors, 86.8％ of respondents were considered as active health surveillance level 1 that require continuous monitoring on their symptoms and working conditions. And 57.1％ of the respondents were considered as active health surveillance level 2 that needed medical check-ups for proper medical treatment. The analysis of occupational risk factors revealed that handling of heavy object (46.15％) and repeated awkward postures (46.15％) were two most contributing risk factors for the on-set of MSD at this work site followed by static strain (7.7％), and vibration and impact (3.8％). Medical examination was performed by an industrial medicine MD on 156 workers those considered as active health surveillance level 2. The result showed that 35 workers (20.7％) were considered as MSD patient group at severe level, and 68.6 workers (68.6％) were considered as moderate group and 18 workers (10.6％) were considered minor or normal group those have no symptom.

• Journal of environmental and Sanitary engineering
• /
• v.21 no.4 s.62
• /
• pp.19-28
• /
• 2006

The purpose of this study was to investigate the related factor for the prevalence of musculoskeletal symptoms among 212 sewing worker. The survey was performed with self-administered questionnaire for the risk factors related to musculoskeletal disorders(MSDs) from August 5 to 7 in 2005. The prevalence of musculoskeletal symptoms were 75.8% and the those of the local symptoms were 71.7 % for shoulder, 60.4 % for neck, 35.8 % for arm and 50.9 % for wrist. The risk factors related the self-reported MSDs had not shown in general characteristics. But, there was a significant difference between daily working hour and wrist, working speed and neck, the degree of satisfaction and wrist for work related factor. Also, it was shown the significant difference between chair height and neck, the height of sewing machine and wrist among the space below work station, neck, waist for the prevalence of musculoskeletal symptoms. The significant correlation was shown for daily working hour and wrist, working speed and arm, work load and shoulder and the degree of satisfaction and arm for work related subjective symptom. Considering above results, it is suggested the ergonomic design be provided to working hour, the height of chair and work station as well as daily working hour even there is a significant difference for the prevalence of symptoms in each body part for sewing workers.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.4
• /
• pp.153-160
• /
• 2007

Due to the high occurrence rate of musculoskeletal disorders(MSDs), many Korean companies adopted various assessment tools to evaluate workers' musculoskeletal stress. Using the results of this evaluation, tasks were selected for improvements. However, there are still many workers who complained of musculoskeletal stress of their tasks. Their tasks usually consist of repetitive activities and a short rest cycle. This prompts a concern of reliability of the evaluation tools and especially RULA. Thus in this study, OCRA(The Occupational Repetitive Action tool) was used to check whether RULA(Rapid Upper Limb Assessment) evaluates workers' musculoskeletal stress reasonably well since OCRA has been known to be a good evaluation tool for repetitive tasks and tasks with short recovery periods. The evaluation was conducted on 142 tasks. It was found that 65 tasks showed higher action levels by OCRA than by RULA. However, 13 tasks showed the reversed result and 64 tasks showed the same level regardless of the evaluation tool. It was concluded that either RULA or OCRA alone cannot evaluate all types of tasks very well. It is suggested that OCRA needs to be used with RULA together for the evaluations of musculoskeletal stress at workplaces where repetitive activities and short recovery periods exist.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.4
• /
• pp.503-507
• /
• 2011

Objective: This paper presents the factors influencing the effectiveness of materials handling equipments in agriculture. Background: Agriculture is one of the job categories where work-related musculoskeletal disorders(MSDs) are the most common. Statistics shows that majority of farm workers is exposed to repetitive and forceful body movements, lifting, lowering, pushing, pulling, or carrying heavy materials. In such a working environment, materials handling equipments are required and introduced to assist in the prevention of MSDs and other farm injuries. Method: Examples of materials handling equipments are rail carts, portable lifts, and bale handlers. Contributing factors influencing the effectiveness of materials handling equipments supplied in agriculture were identified based on the lessons learned from previous government-funded ergonomic projects. Results: Contributing factors identified include: (1) forward-looking attitude for the standardization of farming, its environments, and handling equipments, (2) participation of farm members in the process and evaluation of project, (3) leadership of project manager, (4) reinforcement of safety education and training, and (5) project selection and priority of handling equipment. Conclusion: Government-funded research planners, farmers, ergonomists, and farm machine experts are recommended to consider the factors identified when implementing materials handling equipments in agriculture. Application: Actual or potential application of this research includes recommendation for the effective implementation of material materials handling equipments in agricultural sectors.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.57-67
• /
• 2009

The psychosocial stress and musculoskeletal disorders(MSDs) have been one of major health problems for hospital workers. This study tried to understand the relationship between symptoms associated with MSDs and risk factors such as working posture, job stress, psychosocial stress and fatigue. A total number of 655 hospital workers participated in this study. Specifically, REBA was applied for evaluating working posture and a checklist prepared by KOSHA(Korean Occupational Safety and Health Agency) was used for symptom survey. A questionnaire from KOSHA was also used for collecting data associated with job stress, psychosocial stress and fatigue. All these data were formulated and modeled by path analysis which was one of major statistical tools in this study. Specifically, path analysis for the data we collected came up with several major findings. As a result, as for body part(neck), (waist) and (arms) the degree of risk of work posture measured with the use of job stress(KOSS), psycho-social stress(PWI-SF) and REBA is significantly more affected by fatigue than muscular skeletal disease related consciousness symptom. However, regarding bod(wrist), the degree of risk of work posture measured with the use of job stress(KOSS) and REBA is directly affected by muscular skeletal disease related consciousness symptom. This study is meaningful in that the study clarified the causal relations of the degree of risk of work posture, degree of fatigue, and muscular skeletal disease related consciousness symptoms by each body part measured with the use of work stress(KOSS), psycho-social stress(PWI-SF) and REBA.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.2
• /
• pp.81-90
• /
• 2006

The Strain Index(SI) has been commonly used to evaluate the musculoskeletal disorders(MSDs) of upper extremities. Recently, the American Conference of Governmental Industrial Hygienists(ACGIH) adopted the Threshold Limit Value for hand activity level (HAL TLV) focused on the hand, wrist, and forearm. The MSDs risks of 37 repetitive works conducted at an automobile climate control system manufacturing factory were evaluated using both the HAL TLV and the SI, and the results by two methods were compared. Also, measured repetitive frequencies of upper limbs joint were mesured using electromyogram and electrogoniometer. The evaluation results of the HAL were related with the repetitive frequency data of upper limbs joint by electrogoniometer, and the NPF was related with %MVC of ECU. The evaluation result of HAL TLV was highly related with the SI score(r=0.66, p<0.01). Of total 37 tasks, 25 tasks(67.6%) were exceeded the TLV and 34 tasks(91.9%) exceeded the SI limit. Although there was a high relationship between the HAL TLV and SI score, the HAL TLV underestimated the risk in comparison with the SI. The correlation coefficients(r) between the HAL TLV data and the repetitive frequency of upper limbs joint were 0.45~0.55(p<0.01). The MSD symptoms was significantly different between high risk groups and low risk groups evaluated by HAL TLV(p<0.01), but was not different between two groups by SI. In conclusion, the HAL TLV is a proper tool for repetitive works.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.749-755
• /
• 2011

Objective: The purpose of this study is to assess the reducing effect of workload on developed electro-motion scissors. Methods: To achieve this, we measured the pressure distribution, Joint angle of fingers and JSI(Job Strain Index) for electro-motion scissors and hand-operated scissor in objective assessment and surveyed the uncomfortable degree in subjective assessment. Results: As a result, The peak of pressure in the electro-motion scissors was generally lower than the hand-operated scissors. JSI and overall joint angle of fingers for the electro-motion scissors were remarkably lower than the hand-operated scissors. Also, the subjective uncomfortable degree showed that the uncomfortable point of electro-motion scissors were generally lower than the hand operated scissors. Conclusion: The impact of reducing the work load as well as distributing the pressure around the hand by using electro-motion scissors during grapes pinching was confirmed.