• ETRI Journal
• /
• 제45권2호
• /
• pp.203-212
• /
• 2023

In this study, we developed a co-located and space-shared multiple-input multiple-output (MIMO) antenna module with a modular design and high integration level. The proposed antenna pair includes a half-wavelength loop antenna and a dipole-type antenna printed on the front and back sides of a compact modular board. Owing to their modal orthogonality, these two independent antenna elements are highly self-isolated and free of additional decoupling components, even though they are assembled at the same location and within the same space. Thus, the proposed antenna is attractive in 5G MIMO systems. Furthermore, the proposed co-located and space-shared MIMO antenna module was employed in a 5G smartphone to verify their radiation and diversity performances. A 12 × 12 MIMO antenna system was simulated and fabricated using the proposed module. Based on the results, the proposed module can be employed in large-scale MIMO antenna systems for current and future terminal devices owing to its high integration, compactness, simple implementation, and inherent isolation.

• 한국통신학회논문지
• /
• 제34권6A호
• /
• pp.494-499
• /
• 2009

본 논문에서는 하향링크 다중 사용자 Multiple Input Multiple Output (MIMO) 채널 환경에서 시스템 용량을 최대화시키기 위한 효과적인 사용자 선택 기법에 대해서 논의한다. 본 논문에서 제안하는 방법은 사용자 채널 파워와 채널 간의 각도를 이용하여 최적의 사용자 집단을 선택하는 새로운 방법이다. 이 방법은 SUS 방법에 비해 허용 상관도 값을 별도로 생각하지 않아도 되기 때문에 간단한 방법이며, 시스템 성능을 최대화시키는 사용자들을 찾는 방법이기 때문에 향상된 성능을 보인다.

• Journal of electromagnetic engineering and science
• /
• 제16권2호
• /
• pp.126-133
• /
• 2016

Wireless power transfer (WPT) efficiencies for multiple-input multiple-output (MIMO) systems are formulated with a goal of achieving their maximums using Z matrices. The maximum efficiencies for any arbitrarily given configurations are obtained using optimum loads, which can be determined numerically through adequate optimization procedures in general. For some simpler special cases (single-input single-output, single-input multiple-output, and multiple-input single-output) of the MIMO systems, the efficiencies and optimum loads to maximize them can be obtained using closed-form expressions. These closed-form solutions give us more physical insight into the given WPT problem. These efficiencies are evaluated theoretically based on the presented formulation and also verified with comparisons with circuit- and EM-simulation results. They are shown to lead to a good agreement. This work may be useful for construction of the wireless Internet of Things, especially employed with energy autonomy.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.949-954
• /
• 2017

Multiple input, multiple output orthogonal frequency division multiplexing (MIMO OFDM) systems are the candidate for the future wireless communications. However, the main drawback of MIMO OFDM systems is their sensitivity to carrier frequency offset (CFO) similar to the single input, single output OFDM (SISO OFDM) systems. The demodulation of a signal with CFO causes large bit error rate and degrade the performance of a symbol synchronizer. It is important to estimate the frequency offset and minimize or eliminate its impact. In this paper, we propose a technique based on observation training symbols for estimating CFO by employing block-by-block estimation for SISO OFDM systems. The technique of SISO OFDM is extended to the MIMO OFDM systems. Simulation results show that the proposed techniques have a superior performance and better accuracy compared to the conventional techniques in the sense of mean square error.

• Journal of Communications and Networks
• /
• 제18권4호
• /
• pp.649-657
• /
• 2016

In this paper, we investigate energy efficiency (EE) of the traditional co-located and the distributed massive multiple-input multiple-output (MIMO) systems. First, we derive an approximate EE expression for both the idealistic and the realistic power consumption models. Then an optimal energy-efficient remote access unit (RAU) selection algorithm based on the distance between the mobile stations (MSs) and the RAUs are developed to maximize the EE for the downlink distributed massive MIMO systems under the realistic power consumption model. Numerical results show that the EE of the distributed massive MIMO systems is larger than the co-located massive MIMO systems under both the idealistic and realistic power consumption models, and the optimal EE can be obtained by the developed energy-efficient RAU selection algorithm.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.320-326
• /
• 2016

In existing literature on multiple-input multiple-output (MIMO) relaying communication systems, antenna selection is often implemented by maximizing the channel capacity or the output single-to-noise ratio (SNR). In this paper, we propose an energy-efficient low-complexity antenna selection scheme for MIMO relaying communication systems. The proposed algorithm is based on beamforming and maximizing the Frobenius norm to jointly optimize the transmit power, number of active antennas, and antenna subsets at the source, relaying and destination. We maximize the energy efficiency between the link of source to relay and the link of relay to destination to obtain the maximum energy efficiency of the system, subject to the SNR constraint. Compared to existing antenna selection methods forMIMO relaying communication systems, simulation results demonstrate that the proposed method can save more power in term of energy efficiency, while having lower computational complexity.

• 한국통신학회논문지
• /
• 제32권12A호
• /
• pp.1238-1243
• /
• 2007

본 논문에서는 zero-forcing (ZF) 기반 다중 사용자 MIMO (multiple-input multiple-output) 시스템에서, 송신-처리-행렬을 구하기 위한 간단한 순차적 (recursive) nulling 행렬 계산 알고리즘을 제안한다. 제안한 방식은 채널 행렬의 부분 행렬을 써서 구한 nulling 행렬을 이용하여 전체 행렬의 nulling 행렬과 송신-처리-행렬을 구하는 방식으로써, 전체 채널 행렬을 이용하여 송신-처리-행렬을 구하는 기존 방식에 비해 계산량을 줄일 수 있다.

• Journal of Communications and Networks
• /
• 제8권2호
• /
• pp.194-204
• /
• 2006

This contribution focuses on the maximum likelihood (ML) noncoherent synchronization of multi-antenna transceivers working in faded environments and employing ultra-wideband impulse radio (UWB-IR) transmit technology. In particular, the Cramer-Rao bound (CRB) is derived for the general case of multiple input multiple output (MIMO) UWB-IR systems and used to compare the ultimate performance of three basic transmit schemes, thereinafter referred to as single input multiple output (SIMO), MIMO equal signaling (MIMO-ES), and MIMO orthogonal signaling (MIMO-OS) ones. Thus, the noncoherent ML synchronizer is developed for the better performing transmit scheme (i.e., the SIMO one) and its performance is evaluated under both signal acquisition and tracking operating conditions. The performance gain in the synchronization of UWB- IR signals arising by the utilization of the multi-antenna technology is also evaluated.

• 한국통신학회논문지
• /
• 제35권7C호
• /
• pp.587-593
• /
• 2010

본 논문에서는 extrinsic information transfer (EXIT) chart를 이용하여 다중 안테나 시스템에서 irregular low-density parity-check (LDPC) code를 설계하는 방법을 기술한다. 다중 안테나 기반의 Irregular LDPC code 설계를 위하여 maximum a posteriori probability (MAP) 방식의 다중 안테나 검출 방식이 사용되었으며 수신기는 다중 안테나 검출기와 LDPC 복호기 사이에서 복호된 soft 정보를 주고 받는 turbo iterative 구조를 가정하였다. 다중 안테나 기반의 irregular LDPC code의 edge degree 분포는 EXIT chart와 linear optimization programming 기법을 사용하여 얻을 수 있으며 컴퓨터 시뮬레이션을 통하여 제안된 방법으로 설계된 irregular LDPC code의 성능을 다양한 환경에서 검증하였다.

• Journal of Communications and Networks
• /
• 제9권3호
• /
• pp.254-264
• /
• 2007

A promising approach to improve the performance of mobile location system is the use of antenna arrays in both transmitter and receiver sides. Using advanced array signal processing techniques, such multiple-input multiple-output (MIMO) communication systems can offer more mobile location information by exploiting the spatial properties of the multipath channel. In this paper, we propose a novel approach to determine the position of mobile terminal based on estimated multipath signal parameters using only one base station in MIMO communication systems. This approach intends to minimize the error occurring from the estimation of multiple paths and gives an optimal estimation of the position of mobile terminal by simultaneously calculating a set of nonlinear location equations. This solution breaks the bottleneck of conventional mobile location systems which have to require multilateration of at least three base stations.