• ETRI Journal
• /
• 제34권5호
• /
• pp.763-766
• /
• 2012

This letter proposes an iterative multimode precoding scheme with limited feedback for nonreciprocal MIMO interference channels. Based on analysis of game theory, we model the iterative multimode precoding as a noncooperative game with a finite set of strategies. Numerical results are presented to verify the sum rate performance of the proposed scheme.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.62-72
• /
• 1997

The optical power splitter/couplers based on MMI(multimode interference) in GaAs/AlGaAs are studied. We presetn a design of optical power splitter/couplers, which have deeply etched multimode waveguide. The properties and fabrication tolerance on the etching depth, multimode waveguide width are simulatedusing a FD-BPM (finite difference beam propgation method). Proposed 1*N optical of designed device is 0.7dB smaller than the optical power splitter with a shallowly etched MMI section. For 0.5dB excess loss, the predicted fabrication tolerance is 0.6.mu.m on the multimode waveguide width of the 14 optical power splitter with a deeply etched MMI section. Also excess loss and uniformity of poposed 32*32 optical power coupler are below 0.3dB. The excess loss of proposed 32*32 optical power coupler is 2dB smaller than the optical power coupler with a shallowly etched MMI section. It is shown that the optical power splitters/couplers with a deeply etched mMI section have low loss, good uniformity, and improved fabriction tolerance.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.15-22
• /
• 2014

We present a novel bandwidth measurement scheme for multimode optical fibers. Amplified spontaneous emission (ASE) radiation was utilized for a source of intrinsically modulated light with a wide modulation bandwidth. In our measurement scheme, the continuous-wave (CW) ASE light that passed through a multimode fiber (MMF) under test was analyzed by the fourth-order power with a high-speed photodetector and an electric spectrum analyzer. The modulation transfer function of the multimode fiber could be directly measured with the photoelectric spectra in the modulation frequency domain. The measurement result of our method was experimentally compared to that of the conventional measurement scheme based on the impulse response measurement. It has been found that our scheme provides a stable measurement means of MMF characterization that is suitable for the field testing due to the simplicity of the system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.834-838
• /
• 2004

We report on a simple method of fabricating multimode transflective liquid crystal displays (LCDs) using the photoalignment technique. Using a self-masking process of ultraviolet light by the reflector as a photomask as well as a reflective mirror, the periodic multimode is obtained with no additional fabrication processes. Moreover, variations of the cell gap are not required for such trasflective LCDs

• 한국통신학회논문지
• /
• 제21권8호
• /
• pp.2099-2108
• /
• 1996

The performance of the E-plane monopulse feeder is shown to e improved by using corrugated horn and multimode design. The proposed multimode corrugated horn is analyzed by the mode matching technique. an E-plane monopulse feeding horn is designed and fabricated to show the performance of the multimode corrugated horn. The experiment agrees quite well with the thoretical analysis. The results can be used in the design of monopulse type tracking radar antenna.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.290-292
• /
• 2004

Multimode channel waveguides were fabricated using a direct UV patterning technology from thick films deposited by the one-step dip-coating of an organic/inorganic hybrid material (ORMOCER(equation omitted). The core size of the covered ridge waveguide was 43${\times}$51 $\mu\textrm{m}$$^2$; the waveguides can be readily prepared for multimode applications by direct UV patterning. The waveguides exhibited smooth surface profiles and a low optical loss of 0.07 ㏈/cm at the most important wavelength (850nm) used for optical interconnects.

• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.199-203
• /
• 2005

$M{\times}1$의 다중모드 도파로와 N개의 홀로그램 필터를 이용하여 M개 입력단자와 N개 출력단자 사이에 광신호 교환을 수행할 수 있는 방법을 제안한다. 광신호 경로는 $M{\times}1$의 다중모드 도파로를 사용하고, 이것으로부터 발생하는 스페클 패턴들을 연결 목적지를 결정하는 목적코드로 이용한다. 제안한 시스템에 대해 광신호 교환이 가능함을 실험적으로 보였다.

• Journal of Information Display
• /
• 제5권3호
• /
• pp.8-13
• /
• 2004

We demonstrate a transflective liquid crystal display (LCD), doped with a chiral agent to produce a low helical twisting power, in a multimode configuration consisting of the homogeneous alignment and the hybrid alignment. The multimode transflective LCD with a single cell gap was fabricated using a single-step photoalignment technique with a self-masking process of an array of metal reflectors in the reflective region. In our configuration, the electro-optical disparity between the transmissive region and the reflective region was found to be significantly reduced by the low helical twisting power of the chiral dopant.

• 대한전자공학회논문지
• /
• 제16권1호
• /
• pp.9-13
• /
• 1979

유도체로 일부가 채워진 직륙면체 캐비티의 다중 모드 특성을 그라프적 방법으로 해석하였다. 다중모드 주파수는 3개의 연립 삼각함수 식을 그라프적으로 풀어 얻을 수 있다. 이 해석으로 유도체로 일부 채워진 캐비티의 공진주파수는 빈 캐비티의 공진주파수보다 낮은 쪽으로 이동됨을 보일 수 있다 그러나 이 주파수 이동이 상당히 크기 때문에 섭동방법을 사용할 수 없음을 보일 수 있다. 또한 그라프적 해석은 표면파 모드가 유전체내에 존재함과 그 공진주파수를 쉽게 예언할 수 있음을 볼 수 있다.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.337-341
• /
• 2010

A high sensitivity fiber optic temperature sensor based on a side-polished fiber (SPF) coupled to a tapered multimode overlay waveguide (MMOW) is proposed and studied. Both tapered and non-tapered MMOW were considered to study the effect of tapering of MMOW on the characteristics of the device and to investigate the criticality of the uniformity of the multimode overlay waveguide over the SPF. Present study shows that tapering of the MMOW can be used to tune the desired wavelength range without any loss in the sensitivity. Sensitivity up to 9 nm/$^{\circ}C$ within the temperature range of 25 to $100^{\circ}C$ can be achieved with the proposed sensor, almost 6 times higher compared even to state-of-the-art high-sensitivity grating-based fiber optic temperature sensors.