• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1540-1545
• /
• 2001

This paper is concerned with the reverse link performance of multi-code CDMA systems in multipath fading environments. The degree of orthogonality loss among multiple spreading code channels is characterized as the orthogonality factor. It depends on various system parameters including multipath power profiles of propagation channels and the number of Paths resolved at a Rake receiver. The effect of the parameters on the system performance is then investigated in terms of bit error rate and required signal quality. The results show that multipath delay power profiles dominantly affect mutual interference among multi-code channels and multipath combining gain by bandwidth expansion is not so great due to the increase of the mutual interference. Moreover, the orthogonality factor is derived as the value of between (1/m) and 1.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.484-492
• /
• 2006

A multi-code biorthogonal code keying(MBCK) system consists of multiple waveform coding block, and the sum of output codewords is transmitted. Drawback of MBCK is that it requires amplifier with high linearity because its output symbol is multi-level. MBCK with constant amplitude preceding blcok(CA-MBCK) has been proposed, which guarantees sum of orthogonal codes to have constant amplitude. Redundant bits of CA-MBCK for constant amplitude coding are not only used to make constant amplitude signal but also used to improve the bit error rate(BER) performance at receiver. In this paper, we proposed a transmission scheme which combine CA-MBCK with $Q^{2}PSK$ to improve bandwidth efficiency of CA-MBCK. The BER performance of the scheme is same that of CA-MBCK in additive white gaussian noise(AWGN). And we showed that BER performance of the proposed system can be improved using redundant bits of constant amplitude preceding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9C
• /
• pp.721-728
• /
• 2010

CAMC (constant amplitude multi-code) has a better performance of error correction in iterative decoding than SPCPC (single parity check product code). CAMC benefits from a processing gain since it belongs to a spread spectrum signal. We show that the processing gain enhances the performance of CAMC. Additional correction of bit errors is achieved in the de-spreading of iteratively decoded signal. If the number of errors which survived the iterative decoding is less than or equal to ($\sqrt{N}/2-1$), all of the bit errors are removed after the de-spreading. We also propose a stopping criterion in the iterative decoding, which is based on the histogram of EI (extrinsic information). The initial values of EI are randomly distributed, and then they converge to ($-E_{max}$) or ($+E_{max}$) over the iterations. The strength of the convergence reflects how successfully error correction process is performed. Experimental results show that the proposed method achieves a gain of 0.2 dB in Eb/No.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.1-11
• /
• 2012

The multi-code spread spectrum communication system, which spreads data bit stream by multiplexing orthogonal codes, can transmit data in high rate. However it needs the high-cost good linear amplifier because of the multi-level output signal. In order to overcome this drawback several systems making the amplitude of output signal constant with Walsh codes have been proposed. Recently constant amplitude pre-coded multi-code spread spectrum systems using extended m-sequence have been proposed. In this paper we consider an extended m-sequence based constant amplitude multi-code spread spectrum system with code set partitioning. By grouping the orthogonal codes into 4 subsets, not only is the computational complexity of the transceiver reduced but BER performance also improves. It has been shown that parity checking on four detected codes at the receiver can correct code detection error and result in BER performance enhancement. In this paper we propose a improved parity check receiver. We carried out computer simulation to verify feasibility of the proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.967-975
• /
• 1998

This paper presents a system to cancel the multi-user interference of synchronous DS/CDMA systems by using the estimation circuit and the reference correlator. In the code-division multiple access(CDMA) scheme, the spectrum of the user's signal is directly spreaded by means of the Simplex coed or the phase offsetted PN code. It is interesting for the Simplex code and the PN code to have a similar correalation property. It these codes are used in DS/CDMA systems, the number of acceptable users can be increased in comparison with conventioal DS/CDMA systems. This thesis presents a interference cancellation model to cancel the multi-use interference in DS/CDMA systems by using Simples code of PN code as a spreading sequence. In AWGN environment, we analyze interference generated from other users and compare the resulting performance with that of the conventioanl receiver in same user side.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.354-354
• /
• 2004

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.149-152
• /
• 2011

A Multi-Vision needs an image adjust of each product to make the same picture quality for all products when it's installed. Owing to this reason need individual control. This document request indivisual control method for each product with the Remote controller. To realize this method need make Set ID and Picture ID on the UI and need daisy chain of cable to connect Remocon code(IR Signal) In to Out, After allocation the Set ID for each product. Picture ID of the product which want to change picture quality make equal to Set ID. And the product which is same Set ID and Picture ID is only controlled through decoding of Remocon code to Scaler.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.1
• /
• pp.15-23
• /
• 2001

In this paper, we propose a system to cancel the multi-user interference of synchronous BPSK DS/CDMA systems. In this CDMA scheme, the spectrum of the user's signal is directly spread by means of the Simplex code or the phase offsetted PN code. But in arbitrary bit interval, we use the one spreading code of the Simplex code and the phase offsetted PN code. The receiver cancel the multi-user interference and demodulate information bits by using reference correlator. This paper presents a interference cancellation model and analyzes this system mathematically. The suggested system show that the interference resulting from other users are remarkably reduced. In AWGN and Nakagami fading environment we analyze interference generated from other users and compare the resulting performance with that of the conventional receiver in same user side.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.6
• /
• pp.519-526
• /
• 2013

ECG signal has the feature that is repeated in a cycle of P, Q, R, S, and T waves and is sampled at a high sampling frequency in general. By using the feature of periodic ECG signals, maximizing compression efficiency while minimizing the loss of important information for diagnosis is required. However, the periodic characteristics of such amplitude and period is not constant by measuring time and patients. Even though measured at the same time, the patient's characteristics display different periodic intervals. In this paper, an adaptive multi-level coding is provided by coding adaptively the dominant and non-dominant signal interval of the ECG signal. The proposed method can maximize the compression efficiency by using a multi-level code that applies different compression ratios considering information loss associated with the dominant signal intervals and non-dominant signal intervals. For the case of long time measurement, this method has a merit of maximizing compression ratio compared with existing compression methods that do not use the periodicity of the ECG signal and for the lossless compression coding of non-dominant signal intervals, the method has an advantage that can be stored without loss of information. The effectiveness of the ECG signal compression is proved throughout the experiment on ECG signal of MIT-BIH arrhythmia database.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2021

Due to the Global Navigation Satellite System (GNSS) modernization, the recently launched GNSS satellites transmit signals at various frequency bands of L1, L2 and L5. Considering the Korea Positioning System (KPS) signal and other GNSS augmentation signals in the future, there is a high probability of applying more complex communication techniques to the new GNSS signals. For the reason, GNSS receivers based on flexible Software Defined Radio (SDR) concept needs to be developed to evaluate various experimental communication techniques by accessing each signal processing module in detail. In this paper, we introduce a multi-constellation (GPS/Galileo/BeiDou) multi-band (L1/L2/L5) SDR by utilizing Ettus USRP N210. The signal reception module of the developed SDR includes down-conversion, analog-to-digital conversion, signal acquisition, and tracking. The down-conversion module is designed based on the super-heterodyne method fitted for MHz sampling. The signal acquisition module performs PRN code generation and FFT operation and the signal tracking module implements delay/phase/frequency locked loops only by software. In general, it is difficult to sample entire main lobe components of L5 band signals due to their higher chipping rate compared with L1 and L2 band signals. Experiment result shows that it is possible to acquire and track the under-sampled signals by the developed SDR.