• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.121-124
• /
• 2006

Lightweight aggregate is mainly consist of multi-crystalline structure. It may be abnormal water moving by the change of external circumstance because of its specific portion being between components and aperture. So it has some difficulty in forming without concise method about absorbing character and water-containing point even though it is used to water-containing condition over the 24 hours of absorbing amount in present. This study has main idea on the characteristics of absorption on the pressurization of lightweight aggregate.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.70-78
• /
• 1995

In order to implement broadband RAM's(Radar Absorbing Materials) made up of multiple dielectricl layers, the design variables such as the dielectrci constaints, the depths and the loss tangents of dielectric are optimized. The wave impedances regarding the reflective wave are found in dielectrics, input impedances and reflection coefficients with multiple dielectric layers are derived from the transmission line circuit theory. Finally, minimum average reflective power and optimum design variables are obtained by applying the numerical technique, called modified Powell method. In case of four dielectric layers with inequality constraints in design variables, a quite favourable and feasible result with the total depth of 1.1 cm, the average reflective power of 0.85% over the bradband frequency range is obtained for a specific example.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.234-237
• /
• 2003

The absorption and the interference shielding of the electromagnetic wave problem have been a very important issue for commercial and military purposes. This study dealt with the simulation reflection loss for electromagnetic absorbing sandwich type structures in X-band(8.2Ghz~12.4GHz). Glass/epoxy composites containing conductive carbon blacks were used for the face sheets and styrofoams were used for the core. Their permittivities in X-band were measured using the transmission line technique. Simulation results of 3-1ayered sandwich type structures showed the reflection loss using the theory about transmission and reflection in a multi-layered medium.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1503-1507
• /
• 2003

A general vibration phenomenon of a rigid-body supported by springs can be viewed as a small repetitive screw displacement. From this view, a multi-directional vibration absorber can be designed by use of screw theory and transfer matrix method. In this paper, the basic equations of motion for a multi-body system have been expressed in terms of screws using transfer matrix method and a simple approach to the design of a multi-degrees-of-freedom absorber has been presented. In order to illustrate the methodology, an example for the design of a 2-DOF active absorber which is capable of absorbing vibration of a rigid body excited by 3-DOF external force has been presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.888-891
• /
• 2001

Effects of backing conditions on the impedance tube measurement are investigated experimentally, by using several pairs of generally employed end conditions. The results show that the measured values are similar for most of pairs, except the case of using an open pipe condition. In addition, the random error is investigated in the viewpoint of the variation of test conditions. The multi-termination method is suggested for minimizing such a random error.

• 한국대기환경학회지
• /
• 제34권2호
• /
• pp.207-222
• /
• 2018

In this study, light absorption of carbonaceous species in $PM_{2.5}$ was investigated using a dual-spot 7-wavelength Aethalometer(model AE33) with 1-min time interval between January 01 and September 30, 2017 at an urban site of Gwangju. During the study period, two Asian dust (AD) events occurred in April (AD I) and May (AD II), respectively, during which light absorption in total suspended particles was observed. Black carbon (BC) was the dominant light absorbing aerosol component at all wavelengths over the study period. Light absorption coefficients by aerosol particles were found to have 2.7~3.3 times higher at 370 nm than at 880 nm. This would be attributed to light absorbing organic aerosols, which is called brown carbon (BrC), as well as BC as absorbing agents of aerosol particles. Monthly average absorption ${{\AA}}ngstr{\ddot{o}}m$ exponent ($AAE_{370-950nm}$) calculated over wavelength range of 370~950 nm ranged from 1.10 to 1.35, which was lower than the $AAE_{370-520nm}$ values ranging from 1.19~1.68 that was enhanced due to the presence of BrC. The estimated $AAE_{370-660nm}$ of BrC ranged from 2.2 to 7.5 with an average of 4.22, which was fairly consistent to the values reported by previous studies. The BrC absorption at 370 nm contributed 10.4~28.4% to the total aerosol absorption, with higher contribution in winter and spring and lower in summer. Average $PM_{10}$ and $PM_{2.5}$ concentrations were $108{\pm}36$ and $24{\pm}14{\mu}g/m^3$ during AD I, respectively, and $164{\pm}66$ and $43{\pm}26{\mu}g/m^3$ during AD II, respectively, implying the greater contribution of local pollution and/or regional pollution to $PM_{2.5}$ during the AD II. BC concentration and aerosol light absorption at 370 nm were relatively high in AD II, compared to those in AD I. Strong spectral dependence of aerosol light absorption was clearly found during the two AD events. $AAE_{370-660nm}$ of both light absorbing organic aerosols and dust particles during the AD I and II was $4.8{\pm}0.5$ and $6.2{\pm}0.7$, respectively. Higher AAE value during the AD II could be attributed to mixed enhanced urban pollution and dust aerosols. Absorption contribution by the light absorbing organic and dust aerosols estimated at 370 nm to the total light absorption was approximately 19% before and after the AD events, but it increased to 32.9~35.0% during the AD events. In conclusion, results from this study support enhancement of the aerosol light absorption due to Asian dust particles observed at the site.

• Composites Research
• /
• 제15권2호
• /
• pp.18-23
• /
• 2002

군사적 목적뿐만 아니라 상업적 목적에서도 레이더나 기타 전자파를 방출하는 기기들로부터 생성되는 전자파의 흡수 또는 차폐는 매우 중요한 일이다. 본 연구에서는 다른 유전적 성질을 가지는 복합재층을 배열하여 전자기파의 반사를 최소화하는 연구를 수행하였다. Glass fabric/epoxy에 전도성을 가지는 카본블랙 분체를 혼합한 복합재와 Carbon fabric/epoxy 복합재 대만 유전성질을 측정하였고, 이를 이용하여 X-band(8.2 GHz-l2.4GHz)에 대한 전자기파 반사의 최소화 구조를 구성하였다. 두께2.6mm의 다층 구조로 최대 30dB 이상의 반사 손실과 최대 흡수 주파수로부터 2GHz 주파수 대역에 걸쳐 10dB이상의 반사손실을 일으킬 수 있었다.

• 한국경영정보학회:학술대회논문집
• /
• 한국경영정보학회 2008년도 춘계학술대회
• /
• pp.383-393
• /
• 2008

Online games are the popular topic due to the increased total online game market volume nowadays. And many studies on online games are released. But most studies used the questionnaire method that reveals only section of the situation like a snapshot. For this reason, previous studies have a little limitation that does not show dynamical changing issues like a product life cycle and changes in customer's mind Because of this, we studied on online games with the system dynamic model which can show dynamic simulations to analysis time series data. We chose MMORPG (Massively Multi-play Online) RPG (Role Playing Game) in sort of online games because it has many absorbing factors and enthusiastic users. We designed the simulation model which analyzes the influences of update and CRM strategy on users. We put the game developer who is ready for updated version game and released that periodically and focused on dormant users who used to be enthusiastic about MMORPG. The simulation results showed that the update has positive influences on new users gathering and hold established users. And CRM strategies help to prevent dormant users from transferring to rivals by offering them re-absorbing factors. Through this study, we confirmed the importance of update on online games and the necessity of introducing CRM strategy in the online game market.

• 한국정보시스템학회지:정보시스템연구
• /
• 제17권4호
• /
• pp.281-299
• /
• 2008

An online game is popular topic due to the increased total online game market volume nowadays. Even though many studies on an online game are released, most studies have used survey method that reveal only section of the situation like a snapshot. For this reason, previous studies have a little limitation that does not show dynamically changing issues like a product life cycle and change in customer's satisfaction. Because of this, we researched on an online game with the system dynamic model which can show dynamic simulation to analysis time series data. We chose MMORPG (Massively Multi-play Online Role Playing Game) in sort of an online game because it has many absorbing factors and enthusiastic users. We assumed that the game developer is ready for updated version game and release that periodically and focused on dormant users who used to be enthusiastic about MMORPG and designed simulation model which analyze how to influence of update and CRM strategy on users. The simulation results showed that the update has positive influences to gather new users and hold established users and CRM strategies help to prevent dormant users from transferring to rivals to offer them re-absorbing factors. Through this study, we confirmed importance of update on a online game and suggested the necessity to introduce CRM strategy in an online game market.

• 한국철도학회논문집
• /
• 제14권1호
• /
• pp.11-18
• /
• 2011

본 논문은 열차의 타고오름 해석을 위한 새로운 2차원 다물체 동역학 모델링 방법을 제안하였다. 본 동역학 모델은 에너지 흡수구조/부품뿐만 아니라 차체의 변형도 고려하여 비선형 스프링, 댐퍼, 질량으로 구성되며 철도차량의 충돌에너지흡수량, 승객구간의 가속도, 연결 장치의 충격력, 차량간 타고오름 변위 등을 잘 예측할 수 있다. 제안된 방법으로 한국형고속열차를 차체 각 부분의 압괴 특성을 구하고 2차원 다물체 충돌동역학 모델을 구성하였다. 열차 대 열차 충돌 시나리오조건으로 2차원 동역학 모델을 시뮬레이션하고 3차원 가상시험 모델로 평가하였다. 그 결과 2차원 동역학 모델은 타고오름 거동을 잘 예측하였으며 차체변형을 고려한 모델링 기법이 타고오름 평가에 중요함을 확인하였다.