• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.111-118
• /
• 2014

PURPOSES : This study performs fundamental research on ramp-metering design criteria. METHODS : We carefully review previous studies in terms of ramp-metering design criteria and then consider applicability in Korea. For this, traffic simulation model is employed to analyze actual effect according to specific location of stop-line when implementing ramp-metering. RESULTS : When a stop-line moving forward with a 50m interval, travel speed at mainline relative to current stop-line location tends to decrease. However, traveling speed at approach roads increase about 5~18% under the same condition. When a stop-line location moving backward with a 50m interval, mainline travel speed increase approximately 17~32% whereas traveling speed at approach roads decrease. All cases are compared with the current stop-line location. CONCLUSIONS : We believe that both cases are useful with respect to freeway management. For example, moving forward a stop-line case can be used management for queuing area at ramp section and approach roads. Moving backward a stop-line case can be used for traffic control, focusing on mainline of freeways.

• Korean Institute of Interior Design Journal
• /
• v.14 no.6 s.53
• /
• pp.236-243
• /
• 2005

The pre-examination closely beforehand relation between the articles on exhibition and visitors, the visitors and exhibition space, the exhibition space and the articles on exhibition, and the acceptance of various requirements are the matters you should consider in the initial stage when planning the establishment of a museum. Especially, the clear guideline for the layout of exhibition to meet the intention of spectators considered based on the seeing behavior in the exhibition hall (i.e. they see the articles on exhibition in order passively under instructions of the museum or select them by themselves positively etc.), and the moving line of appreciation and the exhibition type seems to be not yet prepared sufficiently. This study can be defined as the study of fundamental background for the architectural guideline for the characteristics of visitor's behavior, the selected moving line in the exhibition hall, the layout against the forced moving line and the type of exhibition space. As a part of this study, we carried out the research and the study for how the movement of visitors and the characteristics of seeing behaviors according to the type of the moving line are shown, based on the type of moving line for seeing suggested by David Dean.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.1
• /
• pp.55-67
• /
• 2004

In this paper, an active vibration control of a translating steel strip in a zinc galvanizing line is investigated. The control objectives in the galvanizing line are to improve the uniformity of the zinc deposit on the strip surfaces and to reduce the zinc consumption. The translating steel strip is modeled as a moving belt equation by using Hamilton’s principle for systems with moving mass. The total mechanical energy of the strip is considered to be a Lyapunov function candidate. A nonlinear boundary control law that assures the exponential stability of the closed loop system is derived. The existence of a closed-loop solution is shown by proving that the closed-loop dynamics is dissipative. Simulation results are provided.

• Structural Engineering and Mechanics
• /
• v.66 no.3
• /
• pp.387-397
• /
• 2018

In this paper, a general closed-form solution for evaluating the dynamic behavior of a Timoshenko beam on elastic foundation under a moving harmonic line load is formulated in the frequency-wavenumber domain and in a moving coordinate system. It is found that the characteristic equation is quartic with real coefficients only, and its poles can be presented explicitly. This enables the substitution of these poles into Cauchy's residue theorem, leading to the general closed-form solution. The solution can be reduced to seven existing closed-form solutions to different sub-problems and a new closed-form solution to the subproblem of a Timoshenko beam on an elastic foundation subjected to a moving quasi-static line load. Two examples are included to verify the solution.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.863-866
• /
• 2008

For the cost reduction in the fabrication of display panels, a reverse moving system was equipped to a compacted in-line wet etch/cleaning system. For the effect of the alternating movement of substrate on the wet etch process, ITO layers were etched in various moving modes of substrates and the results were compared and analyzed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.327-331
• /
• 2008

An in-line wet etch/cleaning system was established for the research and development in wet etch process as a formation of electrode such as metal or transparent conductive oxide layer. A reverse moving system was equipped in the in-line wet etch/cleaning system for the alternating motion of glass substrate in a wet etch bath of the system. Therefore, it was possible for the glass substrate to be moved back and forth and it was possible to reduce the size of the system by using the reversing moving system. For the effect of the alternating motion of substrate on the etch rate in the in-line wet etch bath, indium tin oxide(ITO) patterns were obtained through wet etch process in the in-line system in which the substrate was moved back and forth. From the CD(critical dimension) skews resulted from the ADI CD and ACI CD of the ITO patterns, it was concluded that the alternating motion of glass substrate are possible to be applied to the mass production of wet etch process.

• Design & Manufacturing
• /
• v.10 no.2
• /
• pp.39-43
• /
• 2016

Most of automobile parts manufactured through sheet metal forming are mass-produced by using press mold. In recent years, automation and speeding up of press lines have been expanding to maximize product productivity using a press die. The proportion of the moving time in the press line is high, and therefore requires high-speed and automated equipment for the moving process. In this paper, to provide the double-moving system can be the moving time reduction and increased productivity. Developed transport system consists of the material supply, the material feeding device and the PLC controller and the devices are positioned between each of the pressing process. In this paper, the double-moving system including developed units using a multi-axial single-acting through this reduced the C/T(cycle time) and improved the productivity.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.3
• /
• pp.25-34
• /
• 1997

As you know, there are a lot of our own traditional folk village exist in Korea, our country. Most people just know is that Korean traditional village is just happen make it and just continuously keeping this times type. But this village is not just make it but made by serious scientific sources such as, rule of locating streets. There are three very important reasons why I research this topic for my research paper. The first important reason is that Korean traditional villages have the pattern of human moving line system in accordance with hyung-kug. Hangae village that located on inclined ground named baesanimsu has the longer human moving line than Hanbam village that located on level ground. The second important reason is that Korean traditional villages have the smaller human moving line of the length and the amplitude as long as going inside villages. But the unit of the amplitude is the larger. Hanae and Hanbam village is the same pattern. The third important reason is that Korean traditional villages have the smaller human moving line of the length and the amplitude as long as having the larger gradient. Hangae and hanbam village is the same pattern. And Hanbam village hast he bigger human moving line of the length, the amplitude and the unit of the amplitude. In conclusion, by these three important big reasons, Korean traditional village is built by scientific sources. And now we can say that our old generation was very unbelievable genius. By these reasons we have to make sure when we make another city town and farm village planning. The meaning of making sure is that a person who have responsibility for making city have to make plan by scientific sources. It has to be not only theoretical but also think about real human life. It also fit on our traditional.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1777-1783
• /
• 2013

We do research on the simulation of Doppler effect from a target's moving under the sea by Transmission Line Matrix modeling which is one of numerical methods on time domain. To implement the effect, the input signal was entered at a moving node according to a moving target's moving speed. The result had maximum 2.47% error compared with the theoretical value. And from simulation results with speed control of a moving target, we could also obtain resonable results within 0.63% error range.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.163-170
• /
• 2015

This research is to focus on the method of moving line optimization in Agricultural Industry, especially Garak Wholesale Market Modernization Project, by using simulation tool. As everybody knew, it's very difficult to apply the SCM operation rules in Agricultural Industry, because the standardization system in Agricultural Industry was not completed. The five flow management factors, vehicle moving line management, customer moving line Management, Logistics Device Moving Line Management, Working Person Moving Line Management, Product display moving line management, are needed to be optimized on the basis of standardization rules, and to achieve this will be the good infrastructure to make the Agricultural SCM system. It's very different between the SCM structure of manufacturing industry and logistics industry and the SCM structure of Agricultural Industry, because the SCM in manufacturing is occur in the basis of flow management, on the contrary, the SCM of Agricultural Industry is on the basis of activity management. For these reason, this study is the first approach to apply the simulation method in the part of moving line optimization in Agricultural SCM, and in near future, This study will help all designers and operators to apply the simulation work in the part of agricultural SCM, and we hope that next advanced study will continue by using this study.