• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.86-88
• /
• 2005

The line-start permanent magnet synchronous motor has a high efficiency and an advantage in constant speed operation regardless of the effect of load variation. However it is difficult to predict the performance of characteristics accurately, because of the unbalanced starting torque with the initial starting position of the rotor and the generation of a break torque. In this paper the dynamic characteristics of the line-start permanent magnet synchronous motor arc described and compared with those of the squirrel-cage induction motor through the simulation to find the characteristics of the permanent magnets and the rotor bars in the line-start permanent magnet synchronous motor.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.92-94
• /
• 2005

Speed and torque controls of permanent magnet synchronous motors are usually attained by the application of position and speed sensors. However, speed and position sensors require the additional mounting space, reduce the reliability in harsh environments and increase the cost of a motor. Therefore, many studios have been performed for the elimination of speed and position sensors. This paper investigates a novel speed sensorless control of a permanent magnet synchronous motor. The proposed control strategy compensates a speed error through the difference between the calculated and measured reactive power. The proposed algorithm is verified through the simulation and experimentation.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.921-923
• /
• 2005

본 논문은 LCD 제조 공정라인에서 LCD 원판을 이송하기 위한 영구자석 여자 횡자속형 선형 진동기 개발에 관한 내용이다. 3차원 등가 자기 회로망법과 2차원 유한 요소법을 사용하여 이동자의 단부 효과를 고려하여 전동기 특성을 해석하였으며 정특성 실험을 통하여 설계 및 해석의 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1444-1446
• /
• 2005

Recently most machineries have been small size and mobile type. And human body insertion type endoscope and micro robot technology has been developed. Then the motors used in this field are developed in micro size such as about 2mm in diameter. The structure of this motor is similar to a general brushless DC(BLDC) motor but because of small size there is no position sensor such as hall sensor. In this paper, a design and fabrication result of an ultra-small brushless DC motor is presented. This motor is designed to 3-phase coreless winding and operated with sensor-less type driver. Test results confirmed the feasibility of the proposed motor drive system design.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1104-1107
• /
• 2005

This paper presents a comparison of core losses for the four cases of Switched Reluctance Motors (SRM) with different winding method and switching sequence. With concentrated winding SRM, two kinds of switching sequence are considered for one-phase exciting and two-phase simultaneously exciting driving. With both distributed winding and toroidal winding, two-phase exciting driving is considered. The ratio of calculated core losses to input power is able to be used a guide or reference for deciding the winding method and switching sequence of in the initial design stage of SRM.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1183-1185
• /
• 2005

This paper describes the optimal design and performance characteristics of the BLDC Motor for Electrical Power Steering System. To develope the optimal dimension within a given volume, BLDC Motor with the low cogging torque is designed and analyzed by FEM analysis. The prototype BLDC Motor has 4 poles rotor and 24 slots stator. To estimate the prototype machine, this paper gives the comparison between the FEM results and the experiment ones.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.10-12
• /
• 1998

Pumping liquid metal in nuclear power plant application by conventional centrifugal pumps pose difficulties such as bearing wear out at high temperatures and leak proof sealing of the liquid metal. MHD machine is obtained by replacing solid conducting secondary of conventional motors with ionized gas or liquid metal. It is used for reactor cooling pump because of construction simplicity, perfect sealing and easy operation/maintenance MHD pump is complicated because it includes electromagnetic and hydrodynamic phenomena. The principle of MHD Pumps is described in this paper. We design small laboratory size Flat Linear Induction Pump(FLIP) for transferring sodium.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.159-162
• /
• 1998

In this paper, an algorithm of the automatic commissioning for vector controlled induction motor using controller characteristics is proposed. The automation of commissioning sequence is carried out using Walsh function analysis. In the proposed method, the distortion of the controller output waveform is easily detected and can be automatically tuned by using Walsh function analysis. This tuning algorithm has the advantage such as less sensitivity to the variation of other parameters and high sensitivity to parameter error. Hence, the easy tuning of high performance drive system of the induction motor is possible. Some experiments are carried out to prove the validity of the proposed automatic commissioning algorithm.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.37-39
• /
• 1998

The hybrid step motor has found applications in a wide range of mechanical systems as a low cost, open-loop positioning device. The step motor provides good stiffness at rest against disturbing load influences, a combination of moderate speed fine resolution, high reliability and simplicity. In recent years, considerable competition has arisen over the technological issue of wheather the device should be applied as a 2-Phase or 5-Phase machine. In this paper, to compare two systems, we have atempted to derive the mathematical. model, and analysed operating detent torque with this model. The analysis shows that a fundamental component of the permeance distribution produces the average torque and that harmonic components produce the ripple torque.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.163-167
• /
• 1998

In this paper an improved re-adhesion control scheme is proposed for IC4M(1-Controller 4-Motors) traction system. It is well known that the coefficient of adhesion between wheel and rail has a maximum value at a certain slip velocity. In the proposed scheme, maximum adhesive force is estimated by an observer and the driving torque of motor is controlled to set maximum adhesive force. The simulation results are presented.