• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.67-70
• /
• 2010

This study investigates the physical properties of the acrylic emulsion mortar according to variable composition set of redispersible emulsion powders. This materials have to be composed of many types of binders and chemical additives. So it is difficult to decide suitable mixing proportion of composition materials. The redispersible emulsion powders using "2, 4, 6, 8kg" of EVA polymers dispersion ranges are prepared with acrylic emulsion mortars and were tested for basic characteristics such as flexural, and compressive strength, wheel load. Through experiments we found that the improved formula to satisfy the standard of wheel load by EVA polymers, and the masration rangs between about 2.0% to 2.6% which the white portland cenmet and EVA polymers is good for resistauce wheel load.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.1
• /
• pp.153-159
• /
• 1998

최근 교통량의 증가에 의해 직접 하중을 부담하는 교량바닥판의 손상이 심각한문제로 부각되고 있다. 더욱이 차량하중의 증가는 바닥판손상을 더욱 가속화시키고 있는 실정이다. 바닥판의 손상이 심한 경우에는 교체 또는 성능개선공사를 시행하게 되는데, 이때 기존의 현장타설바닥판이 갖는 단점을 보완할 수 있는 프리캐스트 콘크리트 바닥판은 공기단축, 품질확보 등의 측면에서 매우 효과적인 대체공법이 될 수 있다. 프리캐스트 콘크리트 바닥판은 기존의 현장타설바닥판과달리 바닥판간에 이음부를 갖는 구조적 특징이 있으며, 다양한응력상태에 있는 바닥판중에 존재하는 비연속부인 이음부와 콘크리트 부재사이의 원활한 하중전달을 위해 부착강도는 매우 중요하다. 따라서 본 연구에서는 이음부의 부착강도를 함리적으로 평가할 수 있는 새로운 실험방법을 제안하고 이를 이용하여 휨, 직접인장 및 전단실험을 수행하였다. 또한 구성재료에 대한 압축, 휨인장 및 할렬인장강도 특성도 평가하였 다. 부착 및 강도특성에 관한 실험결과, 제안된 실험방법을 이용하면 실제에 근접한 부착강도를 평가할 수 있으며 국내에서 사용되는 충전재료중 무수축모르터가 프리캐스트 콘크리트 바닥판간 이음부의 채움재로서의 기본요건을 만족하고 있는 것을 알 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.395-400
• /
• 2008

This paper indicates the investigation about the development of ET (Environmental Technology) industrial geopolymeric materials from mixture silica mine waste, coal fly ash and alkali activator solution (sodium silicate) by the geopolymer technique at ambient temperature. The results showed that higher compressive strength of geopolymeric mortar increased with a reduce of L/S ratio and increased along with an increase of coal fly ash content. The compressive strengths of geopolymer mortar on low silica of C Silica Mine and K Silica Mine are 18.7 MPa, 20.4 MPa, respectively. Compressive strength of geopolymeric mortar depends on L/S ratio and coal fly ash content added.. Additionally, scanning electron microscope (SEM) techniques are used to characterize the microstructure of the geopolymeric mortars. SEM observation shows that it is possible to have amorphous aluminosilicate gel within mortar. XRD patterns indicate the fact that geopolymeric mortar is composed of amorphous aluminosilicate phase, calcite and quartz.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.94-100
• /
• 1999

Stone is one of the oldest material for construction and artistic works. This study investigates the current use of stones in landscape constructional works, and the design criteria to advance the arts of natural stone arrangements. Thirty four experts and thirty two others were surveyed with various photos of simulated construction works of natural stone arrangements fond improved design guidelines. Major findings are as follows: -The payment for the use of stones ranges approximately 5 to 10% of total cost of landscape constructional works. More stones may be used when better retailing system is introduced, working skill is standardized, and more of the substitute natural stones made of blasted rocks are provided and the cost goes down. -Preferences showed little difference for the mixed use of different sizes, colors and shapes of stones, and for the use of similar ones, in the construction of walls. This does not match with the current design guidelines. -Arranging three stones, which symbolizes heaven, earth, and human being, was the most preferred. As the supply of natural stones is limited and more substitute stones are used, it its needed to establish guidelines for the production of substitute stones. -Grasses are much more preferred between pavement stones than mortars. -In current practices, top of piled up natural stones is usually arranged level. More freely curved top lines are preferred to straight line.

• Ecology and Resilient Infrastructure
• /
• v.5 no.2
• /
• pp.82-87
• /
• 2018

Proliferation of algae on the surface of concrete or mortar in aquatic habitat has a negative impact on maintenance of concrete-based structures. Growth of algae may decrease stability of structure by bio-deterioration. In this study, we developed a functional mortar for restraining bio-deterioration by using $Cu^{2+}$ ion. The mortar contains soluble glass beads made of $Cu^{2+}$ ion, which can dissolve into water slowly. Mortars prepared with different ratio of glass beads (0, 2, 5, 10, and 15%) were placed in a culture medium with algae and incubated over a month period. Water chemistry, chlorophyll-a, and extracellular enzyme activities were measured. The incubation was conducted in both freshwater and seawater conditions, to assess applicability to both aquatic conditions. Overall, mortar with Cu glass exhibited lower chlorophyll-a content, suggesting that the functional mortar reduced algal growth. DOC concentration increased because debris of dead algae increased. Cu glass also decreased phosphatase activity, which is involved in the regeneration of inorganic P from organic moieties. Since, P is often a limiting nutrient for algal production, algal growth may be inhibited. Activities of ${\beta}$-glucosidase and N-acetylglucosaminidase were not significantly affected because carbon and nitrogen mineralization may not be influenced by the Cu glass beads. Our study suggests that functional mortar with Cu glass beads may reduce the growth of algae on the surface, while it has little environmental impact.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.744-749
• /
• 2008

The properties of the polymer-modified mortars are influenced by the polymer film, cement hydrates and the combined structure between the organic and inorganic phases. Also, this quality of polymer modified cement strongly depend on weather condition and polymer cement ratio. To overcome this problem, polymer-modified cement were prepared by varying polymer/cement mass ratio (P/C) with $0{\sim}20%$ and constant water/cement mass ratio of 0.5. The effect of polymer on the hydration of this polymer cement is studied on different polymer cement ratio. The results showed that the polymer cement paste have increased the viscosity in addition the amount of polymer dosage and the polymers is completed resulting in a reduced degree of hydration caused by different ion elution amount. Also we know that the reactants is calcium acetate as a results of chemical reaction between acetate group in EVA which is hydrolysis in water and $Ca^{2+}$ ion during hydration of cement.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.109-116
• /
• 2012

This study investigated the effects of blast furnace slag mortars activated with sodium hydroxide(NaOH) and gypsum in relation to flow, setting time and compressive strength. The parameters in this studied was the gypsum ratio 0 to 50%, 3M and 6M of activator concentration and $20{\pm}2^{\circ}C$ and $35{\pm}2^{\circ}C$ of curing temperatures. The results of flow was increase, setting time was increase as the amount of gypsum increases. But the results of compressive strength was dependent on the gypsum ratio, indicating that the compressive strength increased with the increase of the amount of gypsum until a certain limit, beyond which the strength decreased quickly.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.2
• /
• pp.74-83
• /
• 2018

It is very crucial activities that Korean army have to detect and recognize enemy's locations and types of weapon of their artillery firstly for effective operation of friendly force's artillery weapons during wartime. For these activities, one of the most critical artillery weapon systems is the anti-artillery radar (hereafter; radars) for immediate counter-fire operations against the target. So, in early wartime these radar's roles are very important for minimizing friendly force's damage because arbiters have to recognize a several enemy's artillery positions quickly and then to take an action right away. Up to date, Republic of Korea Army for tactical artillery operations only depends on individual commander's intuition and capability. Therefore, we propose these radars allocation model based on integer programming that combines ArcGIS (Geographic Information System) analysis data and each radar's performances which include allowable specific ranges of altitude, azimuth (FOV; field of view) and distances for target detection, and weapons types i.e., rocket, mortars and cannon ammo etc. And we demonstrate the effectiveness of their allocation's solution of available various types of radar asset through several experimental scenarios. The proposed model can be ensured the optimal detection coverage, the enhancement of artillery radar's operations and assisting a quick decision for commander finally.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.374-381
• /
• 2015

This study is investigating the fire resistant finishing materials composed of fly ash and glass forming light weight aggregate has the high temperature thermal stability. High temperatures such as a fire, cementitious materials beget dehydration and micro crack of cement matrix. From the test result, developed fire resistant finishing materials showed good stability in high temperatures. These high temperature stability is caused by the ceramic binding and low thermal conductivity of glass forming light weight aggregate. Also, alkali activation reaction of fly ash and meta kaolin not showing the decomposition of calcium hydrates. Thus, this result indicates that it is possible to fire resistant finishing light weight mortars.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.301-313
• /
• 2017

This paper presents the fibre-matrix interfacial properties of hooked end steel fibres embedded in ultra-high performance mortars with various water/binder (W/B) ratios. The principle objective was to improve bond behaviour in terms of bond strength by reducing the (W/B) ratio to a minimum. Results show that a decrease in W/B ratio has a significant effect on the bond-slip behaviour of both types of 3D fibres, especially when the W/B ratio was reduced from 0.25 to 0.15. Furthermore, the optimization in maximizing pullout load and total pullout work is found to be more prominent for the 3D fibres with a larger diameter than for fibres with a smaller diameter. On the contrary, increasing the embedded length of the 3D fibres did not result in an improvement on the maximum pullout load, but increase in the total pullout work.