• Structural Engineering and Mechanics
• /
• 제19권2호
• /
• pp.123-139
• /
• 2005

An automatic modal identification program is developed for continuous extraction of modal parameters of three cable-supported bridges in Hong Kong which are instrumented with a long-term monitoring system. The program employs the Complex Modal Indication Function (CMIF) algorithm for identifying modal properties from continuous ambient vibration measurements in an on-line manner. By using the LabVIEW graphical programming language, the software realizes the algorithm in Virtual Instrument (VI) style. The applicability and implementation issues of the developed software are demonstrated by using one-year measurement data acquired from 67 channels of accelerometers permanently installed on the cable-stayed Ting Kau Bridge. With the continuously identified results, variability in modal vectors due to varying environmental conditions and measurement errors is observed. Such an observation is very helpful for selection of appropriate measured modal vectors for structural health monitoring use.

• Corrosion Science and Technology
• /
• 제3권2호
• /
• pp.39-46
• /
• 2004

Development and application of structural health monitoring system in Korea have become active since the early 1990's. In earlier applications, health monitoring systems were installed in several existing bridges in order to collect initial field data by full scale load capacity test for design verification and subsequently monitor long-term performance and durability of the bridge as part of an inspection and maintenance program. Recently, modem and integrated monitoring systems have been introduced in most of the newly constructed long-span bridges since the design stage. This paper outlines the progresses and applications of monitoring systems in Korea for both existing and newly constructed bridges and describes their aims and characteristics.

• 한국인터넷방송통신학회논문지
• /
• 제9권6호
• /
• pp.135-139
• /
• 2009

어선의 안전을 실시간으로 모니터링하고 위험요소가 발생했을 경우에 사용자에게 이를 경보하고 통보해줄 수 있는 장치에 대한 필요성이 크게 대두되고 있다. 위험요소를 감지하는 다기능 센서를 사용하기 위해서 임베디드 모듈에서는 Device driver와 Application program을 구현해야 하는 문제가 있다. 본 논문에서는 Device driver와 Application program의 구현 없이 다기능 센서의 입출력 데이터를 관리 및 처리하기 위해서 PIC18F를 이용하여 센서부의 하드웨어 설계 및 제어프로그램 구현을 하였다. 센서의 동작에 따라 데이터를 출력하는 동작 확인을 통하여 성능검증을 하였다.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.108-117
• /
• 2013

Studies on the regulation and measurement of greenhouse gases(GHGs) emissions have been carrying out for global wanning. In order to reduce greenhouse gas emissions, many countries have been promoting the Emissions Trading System and projects of the Joint Implementation(JI) and Clean Development Mechanism(CDM). These country's GHG emissions have been measured calculation criteria based on the Intergovernmental Panel on Climate Change(IPCC) Guidelines. In order to respond to GHGs regulation, in each country, it is planing to build a Low-Carbon City. The system has been developed for calculating GHGs emissions from companies and institutions in their respective countries. However, the system can monitor the GHGs per city, has not been developed. In this paper, it is studied to design the User Interface and to develop integrated monitoring program for Low-carbon city. This program will make possible monitoring and management, statistics, and reports written by using each data in units of cities.

• 천문학회보
• /
• 제44권1호
• /
• pp.85.4-85.4
• /
• 2019

Supernovae (SNe) are well known as good cosmological distance probes owing to their brightness and well-characterized light curve property. Specifically, type Ia SNe have contributed greatly to our understanding of acceleration of cosmic expansion. However, type IIP supernovae occur most frequently (~ 40% of all) at low and high redshift. As knowledge on the type IIP SNe increases, distance measurement methods using type IIP SNe have evolved. In this study, we apply Photometric Color Method (PCM), which needs only photometric data using properties of plateau on type IIP SNe light curves, to measure distances of several host galaxies of SNe IIP from the Intensive Monitoring Survey of Nearby Galaxies (IMSNG). The daily monitoring of galaxies at < 50 Mpc allows us to construct a dense light curve of SNe that occurred in our target galaxies. We observed two SNe IIP, SN2014cx and SN2017eaw and measured distances to their host galaxies, NGC 337 and NGC6946 respectively. Our results are comparable with other secondary distance measurement methods, 4-5 Mpc, however smaller than the result derived from the Tip of Red Giant Branch (TRGB) method, $6.7{\pm}0.2$ and $7.7{\pm}0.3Mpc$.

• 천문학회보
• /
• 제43권2호
• /
• pp.59.1-59.1
• /
• 2018

SNe light curves have been used to understand the expansion history of the universe, and a lot of efforts have gone into understanding the overall shape of the radioactively powered light curve. However, we still have little direct observational evidence for the theorized SN progenitor systems. Recent studies suggest that the light curve of a supernova shortly after its explosion (< 1 day) contains valuable information about its progenitor system and can be used to set a limit on the progenitor size, R*. In order to catch the early light curve of SNe explosion and understand SNe progenitors, we are performing a ~8hr interval monitoring survey of nearby galaxies (d < 50 Mpc) with 1-m class telescopes around the world. Through this survey, we expect to catch the very early precursor emission as faint as R=21 mag (~0.1 Rsun for the progenitor). In this poster, we outline this project, and provide updates on IMSNG projects during 2017/2018 seasons.

• 한국압력기기공학회 논문집
• /
• 제13권2호
• /
• pp.1-18
• /
• 2017

세계적으로 원자력발전소의 안정적 운영 및 안전성 확보를 위해 수명기간 중 주요 기기 및 배관의 실제 운전 과도상태를 체계적으로 관리하고, 피로 손상의 정량적 평가 및 관리를 위한 체계적인 시스템이 요구되고 있는 실정이다. 이에 본 논문에서는 원자력발전소의 안전등급 1 설비에 대한 피로 평가요건을 분석하였고, 피로 감시방법 및 절차와 웹 기반으로 개발된 피로 감시 시스템인 NuFMS 개발 및 검증 내용을 기술하였다. NuFMS는 설계 시 고려한 과도상태 발생 횟수 대 비발전소의 특정 운전 시점에서의 실제 발생 횟수를 비교하여 안전 여유도의 정량적 확인이 가능하며, 누적피로사용계수 도출을 통해 정확한 피로영향 분석뿐만 아니라 손상 관리가 가능하다. 이와 같이 NuFMS의 적용을 통해 원자력발전소 기기 및 배관의 피로 건전성을 확인하고 운영 신뢰도를 향상시킬 수 있으며, 발전소의 안전성 유지 및 운영비용 절감 등의 효과를 기대할 수 있다. 따라서 향후 국내 전 원전에 NuFMS를 확대 적용할 예정이며, 이러한 기술의 해외 수출을 적극 추진 중이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.338-342
• /
• 2003

Hybrid machine is based on hardware technologies of machine tool and software technologies of open architecture controller. In machining technology, combination technology of turning, milling, and grinding and in machining energy technology. combination of mechanical, electrical, and chemical technology are developed. This paper describes hybrid machine technology for combination of machining, on-machine measurement, on-machine CAM, and on-machine remote monitoring and control in open architecture controller environment. For on-machine measurement, non-contact measurement technology based on CAD information is developed. For on-machine CAM, interactive CAM program for automatic NC program generation and tool path simulation is developed. For generation on-machine remote monitoring and control, suitable interface method between web program and CNC is proposed. The developed hybrid machine technology is implemented in 3 axes milling machine for evaluation of operablity.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.46-55
• /
• 2008

In this paper, we designed the bay control unit that is based on the microprocessors and integrates with the new technology of electrical, electronic, and mechanical fields. Nowadays the customers have required much more integrated multi-protection relay, monitoring, control devices and power management for better and easier maintenance, performance, electrical system analysis and communication according to new trend of switchboard This bay controller supplies those requirements of customers with easy handling and operation. This bay controller provides a graphic display with rear-lit liquid crystal LCD and push buttons as kinds of HMI(Human Machine Interface). This bay controller provides the parameter setting program, control setting program, various editors and fault recording and analysis program on Windows/95/98/NT/2000/XP for HMI. In addition, this bay controller can be set manually and this manual setting function helps user to interface easily.

• 한국항행학회논문지
• /
• 제12권2호
• /
• pp.91-99
• /
• 2008

본 논문에서는 글로벌스타 위성 모뎀을 이용한 무선 원격제어 및 감시 시스템을 구축하였다. 시스템은 C8051F023 마이크로컨트롤러를 이용한 글로벌스타 위성 시스템 단말장비와 WGIS(Web-based GIS)를 이용한 사용자 프로그램으로 구성된다. 이를 통해서 단말장비와 사용자 프로그램 사이의 무선 원격제어 및 감시를 실험하였다. 사용자는 WGIS 프로그램를 사용한 Main 및 Control 다이얼로그를 통하여 용이하게 단말장비를 제어 및 감시 할 수 있으며 또한 위치정보를 확인 할 수 있었다. 단말장비 및 사용자 프로그램의 데이터 통신을 위해서 글로벌스타 위성 모뎀을 위한 PPP 및 TCP/IP 프로토콜을 구현하여 데이터 통신을 원활하게 수행할 수 있도록 하였다. GIS(Geographic Information System) 도구는 ESRI사의 ArcView와 MapObject로 구성되며 GIS를 통하여 사용자에게 시각적으로 다양한 정보를 제공할 수 있었다.