• Journal of Information Display
• /
• 제7권1호
• /
• pp.25-29
• /
• 2006

By the voltage threshold (Vt) close-curve measurement method, the changes in the discharge characteristics such as a firing voltage and IR emission among the three electrodes were examined relative to the low or high panel temperature ranging from -10 to $80^{\circ}$. The variation in the panel temperature was found significantly influence the surface discharge between the MgO surfaces rather than the plate gap discharge between the MgO and phosphor layers. Based on this experimental observation, a modified reset waveform that alleviates the surface discharge during a ramp-up and -down period was deeloped. By adopting the proposed reset waveform, a stable address discharge could be obtained irrespective of the panel temperature variation.

• Korean Chemical Engineering Research
• /
• 제54권6호
• /
• pp.817-821
• /
• 2016

Levodopa or L-3,4-dihydroxyphenylalanine (L-DOPA) is the direct precursor of the neurotransmitter dopamine. L-DOPA is a well-known neuroprotective agent for the treatment of Parkinson's disease symptoms. L-DOPA was synthesized using the enzyme, tyrosinase, as a biocatalyst for the conversion of L-tyrosine to L-DOPA and an electrochemical method for reducing L-DOPAquinone, the product resulting from enzymatic synthesis, to L-DOPA. In this study, three electrode systems were used: A glassy carbon electrode (GCE) as working electrode, a platinum, and a Ag/AgCl electrode as auxiliary and reference electrodes, respectively. GCE has been modified using electropolymerization of pyrrole to facilitate the electron transfer process and immobilize tyrosinase. Optimum conditions for the electropolymerization modified electrode were a temperature of $30^{\circ}C$ and a pH of 7 producing L-DOPA concentration 0.315 mM. After 40 days, the relative activity of an enzyme for electropolymerization remained 38.6%, respectively.

• 한국대기환경학회지
• /
• 제31권6호
• /
• pp.530-537
• /
• 2015

The wet electrostatic precipitator (wet ESP) is an effective control device which removes submicron particles reentrained in a collection plate and water soluble gas. However, its collection efficiency decreases, as its operation is subject to water-induced distortion of the collection electrode. In order to make up for the limitation, we modified the wet ESP system by installing electrosprayed discharge electrodes. The modified wet ESP system can wash both the collection plate and discharge electrode. As a result, we were able to fabricate a compact wet ESP with a small specific collecting area ($0.18m^2(m^3/min)$) that can accomplish a high collection efficiency of fine particles (97.1%). In addition, the device obtained a relatively low specific corona power of approximately $10W/(m^3/min)$.

• 전기화학회지
• /
• 제16권4호
• /
• pp.217-224
• /
• 2013

본 연구에서는 금 나노입자로 전착된 전극위에 3-MPA로 개질된 자가조립 단층 전극의 순환전위법의 특성을 조사하였다. 또한 전극 주변에서 전자와 이온의 이동현상을 해석하였다. 반무한 확산모델을 채택하여, 물질전달 지배계에 대하여 지배방정식과 경계조건을 유도하였다. 자가조립단층 전극에 대한 순환전위법의 수치해를 구하기 위하여, 양함수 유한차분법을 적용하여 MATLAB 프로그램을 작성하여 해를 구현하였다. 자가조립으로 개질된 전극에 대한 본 CV 용 프로그램은 3-MPA으로 개질된 금 나노입자 SAM 전극의 순환전위법 실험결과를 잘 설명하고 있음을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제11권3호
• /
• pp.200-205
• /
• 1990

Chemically modified electrodes(CMEs), based on 2-imino-1-cyclopentane-dithiocarboxylic acid (icdc) containing carbon paste, have been characterized using cyclic voltammetric techniques. Ag(I) was chemically deposited on the CMEs, and voltammograms were obtained with the electrode in a separate buffer solution. The CME surface can be regenerated with exposure to acid and reused for deposition. In 10 deposition/measurement/regenerate cycles, the linear response have been reproduced up to $1{\times}10^{-6}$ M in linear sweep voltammetry and 1${\times}$10-8 M in differential pulse voltammetry with relative standard deviation of 5.2% and 12.4%, respectiveiy. The sensitivity increased with deposition time and scanning rate, and detection limit was $1{\times}10^{-7}M\;and\;1{\times}10^{-9}M$ at 20 minutes deposition in the linear sweep voltammetry and differential pulse voltammetry, respectively. The presence of some metal ions does not influence the silver ion response. Satisfactory results were obtained for the analysis of the silver ion for a variety of reference materials without interference of Hg ion at the condition of pH = 5-6.

• 한국군사과학기술학회지
• /
• 제27권4호
• /
• pp.528-534
• /
• 2024

In continuous research of detecting highly toxic chemical warfare agents to ensure preparedness for the future battlefield, flexible and wearable sensor platforms with high sensitivity are still demanding. Herein we demonstrate a facile fabrication of polypyrrole-based chemiresistors on cellulose paper for the detection of nerve gas simulants. In order to optimize electrical properties of sensor platform, conducting polymer made of polypyrrole were first synthesized on flexible cellulose paper and interdigitated electrodes were formed thereon. Following confirmation of polypyrrole and/or oxime moiety through FT-IR analyses, electrical characteristics were measured in the various ratio of monomers between simple pyrrole and oxime-modified one. Typically for the optimized chemiresistor(2:8 molar ratio of simple pyrrole and oxime-modified one), eleven species of chemical warfare agents were examined and enhanced conductivity(10⁴~10⁵ order) was observed for three simulants(diethyl cyanophosphonate, diisopropyl fluorophosphonate and diethyl chlorophosphonate), which was mainly attributed to intermolecular hydrogen bonding, while no significant responses was recorded against sixteen common volatile organic chemicals.

• 마이크로전자및패키징학회지
• /
• 제31권2호
• /
• pp.78-84
• /
• 2024

이산화탄소 (CO₂)의 전기화학적 환원은 CO₂를 고부가가치 탄소화합물로 변환하는 효과적인 방법으로 주목받고 있다. 본 논문에서는 e-beam 증착법과 양극 산화법을 이용하여 전기화학적 CO₂ 환원용 g-C₃N₄가 도입된 다공성 Au(pAu) 전극을 합성하는 손쉬운 방법과 그 특성에 대해 보고한다. 제작된 pAu@g-C₃N₄ 전극 (@ -0.9 VRHE)은 pAu 전극대비 더 우수한 전기화학적 성능을 보였다. CO₂ 환원 성능을 확인해 보았을 때, 두 전극 모두 CO 생성물에 대해 100%의 패러데이 효율 (FE)을 기록하였으며, pAu@g-C₃N₄ 전극은 최대 9.94 mg/s의 CO 생산량을 나타내어 pAu 전극에 비해 최대 2.2배 많은 CO를 생산하였다. 본 연구는 CO₂ 배출로 인한 기후 변화에 대응하는 경제적이며 지속 가능한 방법을 제공할 뿐만 아니라, 전기화학적 CO₂ 환원용 전극 개발에 크게 기여할 것으로 예상된다.

• Journal of Microbiology and Biotechnology
• /
• 제14권6호
• /
• pp.1120-1128
• /
• 2004

The SCBFC was composed of bilayered cathode, the outside of which was modified with $Fe^{3+}$ (graphite-Fe(III) cathode) and the inside of which was porcelain membrane, and of an anode which was modified with $Mn^{4+}$ (graphite­Mn(lV) anode). The graphite-Fe(III), graphite-Mn(IV), and porcelain membrane were designed to have micropores. The outside of the cathode was exposed to the atmosphere and the inside was contacted with porcelain membrane. In all SCBFCS the graphite-Fe(III) was used as a cathode, and graphite-Mn(IV) and normal graphite were used as anodes, for comparison of the function between normal graphite and graphite-Mn(IV) anode. The potential difference between graphite-Mn(IV) anode and graphite-Fe(III) cathode was about 0.3 volt, which is the source for the electron driving force from anode to cathode. In chemical fuel cells composed of the graphite-Mn(IV) anode and graphite-Fe(III) cathode, a current of maximal 13 mA was produced coupled to oxidation of NADH to $NAD^{+}$ the current was not produced in SCBFC with normal graphite anode. When growing and resting cells of E. coli were applied to the SCBFC with graphite-Mn(IV) anode, the electricity production and substrate consumption were 6 to 7 times higher than in the SCBFC with normal graphite anode, and when we applied anaerobic sewage sludge to SCBFC with graphite-Mn(IV) anode, the electricity production and substrate consumption were 3 to 5 times higher than in the SCBFC with normal graphite anode. These results suggest that useful electric energy might possibly be produced from SCBFC without electron mediators, electrode-active bacteria, and extra energy consumption for the aeration of catholyte, but with wastewater as a fuel.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2266-2270
• /
• 2007

Electron transfer of a redox protein at a bare gold electrode is too slow to observe the redox peaks. A novel Nafion-riboflavin functional membrane was constructed during this study and electron transfer of cytochrome c, superoxide dismutase, and hemoglobin were carried out on the functional membrane-modified gold electrode with good stability and repeatability. The immobilized protein-modified electrodes showed quasireversible electrochemical redox behaviors with formal potentials of 0.150, 0.175, and 0.202 V versus Ag/AgCl for the cytochrome c, superoxide dismutase and hemoglobin, respectively. Whole experiment was carried out in the 50 mM MOPS buffer solution with pH 6.0 at 25 oC. For the immobilized protein, the cathodic transfer coefficients were 0.67, 0.68 and 0.67 and electron transfer-rate constants were evaluated to be 2.25, 2.23 and 2.5 s?1, respectively. Hydrogen peroxide concentration was measured by the peroxidase activity of hemoglobin and our experiment revealed that the enzyme was fully functional while immobilized on the Nafion-riboflavin membrane.

• Journal of Electrochemical Science and Technology
• /
• 제8권1호
• /
• pp.43-52
• /
• 2017

In this paper, for the first time, the electroanalytical study of Triethylenediamine, TEDA was done on a typically graphene modified carbon paste electrode (Gr/CPE) in pH=10.5 of phosphate buffer solutions (PBS). The surface morphology of the bare and modified electrodes was characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electro-oxidation of TEDA was investigated at the surface of modified electrode. The results revealed that the oxidation peak current of TEDA at the surface of Gr/CPE is 2.70 times than that shown at bare-CPE. A linear calibration plot was observed in the range of 1.0 to 202.0 ppm. In this way, the detection limit was found to be 0.18 ppm. The method was then successfully applied to determination of TEDA in aqueous samples obtained from two kinds of activated carbon from the masks of war. On the other hand, density functional theory (DFT) method at B3LYP/6-311++G** level of theory and a conductor-like Polarizable Continuum Model (CPCM) was used to calculate the $pK_a$ values of TEDA. The energies of lowest unoccupied molecular orbital ($E_{LUMO}$) and highest occupied molecular orbital ($E_{HOMO}$), gap energy (${\Delta}E$) and some thermodynamic parameters such as Gibbs free energy of TEDA and its conjugate acid ($HT^+$) were calculated. The results of calculated $pK_a$ were found to be in good agreement with the experimental values.