• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.156-160
• /
• 1999

The ignition of methane-oxygen mixtures highly diluted with argon was examined in the temperature range of 1516-1937 K behind a reflected shock wave. The ignition delay times were measured by monitoring pressure profiles and the total emissions at 5.0 cm from the end wall. It was found that the experimental result was correlated by the temperature and the concentrations of the gases. To complement the experiment, computer modeling study of methane oxidation was carried out using a GRI 1.2 mechanism.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.990-998
• /
• 2004

There have been lots of efforts to analyze the dynamic characteristics of mechanical systems. However, it is difficult the know the dynamic characteristics of mechanical systems composed of many parts with joints. Specially, in case of a bolted Joint structure, no effective modeling method has been defined to acquire dynamic characteristics of the structure using the finite element (FE) analysis. In this research, a linear dynamic model is developed for bolted feints and large interfaces using con frusta method and linear spring elements, respectively. The developed modeling method for bolted joints is verified based on the experimental result.

• Korean Management Science Review
• /
• v.28 no.1
• /
• pp.91-105
• /
• 2011

Among various types of creativity, team creativity has been always receiving attention from both practitioners and researchers because most of works are done in a team format in organizations. Therefore, it would be the best way for corporate performance to increase when team creativity is managed carefully to increase in a steadfast way. Though there are lots of ways to grow team creativity, this study explores the issue of increasing the team creativity by adopting CMC (computer-mediated communication) and exploration and exploitation, which were studied separately, but never analyzed together in the same research framework. Experiments to prove the validity of the research questions are based on ABM (Agent-Based Modeling) simulation. Netlogo language was adopted to build a prototype engine for the simulation engine. Experiment results revealed that in the short-term, both broad CMC mode with high exploration and exploitation, and local CMC mode with high exploration and exploitation result in higher team creativity than other types of combination. However, in the long run, broad CMC mode yields higher team creativity level than local CMC mode.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.628-634
• /
• 2004

The soft switching is applied to the multi-level inverter to enhance the characteristics of HID(High Intensity Discharge) Ballast in headlight of vehicle. The electrical properties are investigated. The available modeling of the ballast in steady-state is calculated using mathematical method and the result is used in analyzing the power characteristics and design of the system. Finally the designed system md modeling is confirmed by the experiment.

• Journal of the Korean earth science society
• /
• v.33 no.5
• /
• pp.401-407
• /
• 2012

The OGS model is configured and used for simulation of the LASGIT project. The modeling conditions and the simulation results from the previous work by Walsh and Calder (2009) are analyzed to see if the simulation configuration is done correctly and to apply for the LASGIT project. Except for the unrealistic modeling conditions used previously, the simulation results successfully demonstrated helium propagation that is typical for the two-phase flow. The results indicated that the relations of capillary pressure and the relative permeability against water saturation used previously should be updated. An elaborated simulation with more realistic parameters should be used to improve the weak points of preliminary work.

• Korea-Australia Rheology Journal
• /
• v.16 no.4
• /
• pp.227-233
• /
• 2004

Simplified model of slide-fed curtain coating flow has been developed and tested in this study. It rests on the sheet profile equations for curtain thickness in curtain flow and its trajectory derived by the integral momentum balance approach of Higgins and Scriven (1979) and Kistler (1983). It also draws on the film profile equation of film thickness variation in flow down a slide. The equations have been solved in finite difference approximation by Newton iteration with continuation. The results show that how inertia (Rey­nolds number), surface tension (capillary number), inclination angle of the slide, and air pressure difference across the curtain affect sheet trajectory and thickness profile. It has been revealed that approximate models can be useful to easily analyze coating flow dynamics without complex computations, giving qualitative agreement with full theory and with experiment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.645-650
• /
• 2004

There have been lots of efforts to analyze the dynamic characteristics of mechanical systems. However, it is difficult to know the dynamic characteristics of mechanical systems composed of many parts with joints. Specially, in case of a bolted joint structure, no effective modeling method has been defined to acquire dynamic characteristics of the structure, using the finite element (FE) analysis. In this research, a linear dynamic model is developed for bolted joints and large interfaces using con frusta method and linear spring elements, respectively. The developed modeling method for bolted joints is verified based on the experimental result.

• Journal of KIISE
• /
• v.42 no.7
• /
• pp.901-909
• /
• 2015

In this paper, to build a parallel corpus between Korean and English in Wikipedia. We proposed a method to find similar sentences based on language resources and topic modeling. We first applied language resources(Wiki-dictionary, numbers, and online dictionary in Daum) to match word sequentially. We construct the Wiki-dictionary using titles in Wikipedia. In order to take advantages of the Wikipedia, we used translation probability in the Wiki-dictionary for word matching. In addition, we improved the accuracy of sentence similarity measuring method by using word distribution based on topic modeling. In the experiment, a previous study showed 48.4% of F1-score with only language resources based on linear combination and 51.6% with the topic modeling considering entire word distributions additionally. However, our proposed methods with sequential matching added translation probability to language resources and achieved 9.9% (58.3%) better result than the previous study. When using the proposed sequential matching method of language resources and topic modeling after considering important word distributions, the proposed system achieved 7.5%(59.1%) better than the previous study.

• Journal of Surface Science and Engineering
• /
• v.37 no.5
• /
• pp.279-288
• /
• 2004

This paper describes a three-dimensional transient finite element model for a laser cladding process. In the model, an adaptive finite element technique is used for dilution control. Using the proposed finite element model, the effects of process parameters such as scanning speed, laser's power, and preheating on the dilution of clad layer, the shape of melting pool, and the temperature distribution are calculated. It is also shown that the optimal process parameters for the required dilution can be determined from the proposed finite element model. An experiment is performed to validate the proposed model. The numerical results are compared with experimental ones.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.108-110
• /
• 2006

A prediction model of charge concentration of silicon nitride (SiN) thin films was constructed by using neural network and genetic algorithm. SIN films were deposited by plasma enhanced chemical vapor deposition and the deposition process was characterized by means of $2^{6-1}$ fractional factorial experiment. Effect of five training factors on the model prediction performance was optimized by using genetic algorithm. This was examined as a function of the learring rate. The root mean squared error of optimized model was 0.975, which is much smaller than statistical regression model by about 45%. The constructed model can facilitate a Qualitative analysis of parameter effects on the charge concentration.