• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.42-47
• /
• 2007

An analytical method for the free vibration of a flexible rectangular plate in contact with water is developed by the Rayleigh.Ritz method. The plate clamped along the edges is partially contacted with water at both sides. It is assumed that the water bounded by rigid walls is incompressible and inviscid. The wet mode shape of the plate is assumed as a combination of the dry mode shapes of a clamped beam. The liquid motion is described by using the liquid displacement potential and determined by using the compatibility conditions along the liquid interface with the plate. Minimizing the Rayleigh quotient based on the energy conservation gives an eigenvalue problem. It is found that the theoretical results can predict excellently the fluid.coupled natural frequencies comparing with the finite element analysis result.

• Nuclear Engineering and Technology
• /
• 제41권3호
• /
• pp.355-364
• /
• 2009

Circular plates with holes are extensively used in mechanical components. The existence of a hole in a circular plate results in a significant change in the natural frequencies and mode shapes of the structure. Especially if the hole is located eccentrically, the vibration behavior of these structures is expected to deviate significantly from that of a plate with a concentric hole. In addition, if the plate is in contact with or submerged in fluid, the situation is more complex. Therefore, in this study, an analytical method to determine the modal characteristics of a plate submerged in fluid is developed based on the finite Fourier-Bessel series expansion and Rayleigh-Ritz method and is verified by the finite element analysis using a commercial program. Also, the relationship between parameter variations and vibration modes is investigated. These results can be used as guidance for the modal analysis and damage detection of a circular plate with a hole.

• 한국소음진동공학회논문집
• /
• 제18권1호
• /
• pp.123-130
• /
• 2008

An analytical method for the free vibration of a flexible rectangular plate in contact with water is developed by the Rayleigh-Ritz method. The plate clamped along the edges is partially contacted with water at both sides. It is assumed that the contained water is incompressible and inviscid. The wet mode shape of the plate is assumed as a combination of the dry mode shapes of a clamped beam. The liquid motion is described by using the liquid displacement potential and determined by using the compatibility conditions along the liquid interface with the plate. Minimizing the Rayleigh quotient based on the energy conservation gives an eigenvalue problem. It is found that the theoretical results can predict excellently the fluid-coupled natural frequencies comparing with the finite element analysis result.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1759-1766
• /
• 2008

According to the increase of power demand and expansion of downtown, it is necessary to install transformers additionally in operating substations and construct substations in residential area. But the public complaint has been increased due to the transformer noise of the substation. KEPCO has used a vibration preventing pad, various soundproof walls and an encloser to transformers in outdoor substations, and a soundproof door, shutter and wind-path soundproof equipment in indoor substations to block the sound propagation from the transformers. But these noise reduction methods are not satisfied. It should be considered to reduce transformer noise itself. In this paper, we investigated tank noise reduction techniques to develope a low noise transformer. According to the mode analysis of transformer tank, we found out characteristics and locations of noise on the tank, and it's nature vibration was also analysed. On the basis of these analysis, reinforcement equipment was installed around transformer tank, and ellipse shape tank was changed to round shape tank. The effect of noise reduction was evaluated using noise generation source.

• 한국소음진동공학회논문집
• /
• 제11권4호
• /
• pp.43-51
• /
• 2001

An experimental modal analysis is the process to identify structure's dynamic characteristics such as resonant frequencies, damping values and mode shapes. An experimental model was made of stainless steel in the shape of a circular cylindrical shell and installed on the test bed with jigs. For investigating vibrational characteristics of the continuous circular cylindrical shell with intermediate supports, modal testing is performed by using impact hammer, accelerometer and 8-channel FFT analyzer. The frequency response function(FRF) measurements are also made on the experimental model within the frequency range from 0 to 4kHz. Modal parameters are identified from resonant peaks in the FRF's and animated deformation patterns associated with each of the resonances are shown on a computer screen. The experimental results are compared with analytical and FEA results.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.76-85
• /
• 1999

GDI(Gasoline Direct Injection( engine technology is well known as a new technology since it can improve fuel consumption and meet future emission regulations. But the GDI has many difficulties to be solved, such as complexity of injection control mode, unburned hydrocarbon, and restricted power. A 2-D shape combustion chamber was adopted to investigate mixture formation and combustion characteristics of GDI engine. Spray and combustion experiments were performed by changing the injection timing. injection pressure an din-cylinder flow in Rapid Compression and Expansion Machine(RCEM).Through the experiments, the detailed characteristics of fuel spray and combustion was analyzed by visualizing the in-cylinder phenomena according to the change of injection condition, and the optimal fuel injection timing and fuel injection pressure were obtained.

• 한국터널지하공간학회 논문집
• /
• 제20권6호
• /
• pp.1147-1159
• /
• 2018

본 연구는 팽창구조체를 이용한 급속차폐 자동화 시스템 검증에 중점을 두었다. 팽창구조체는 해저터널의 침수사고 발생시 막대한 인적 및 물적 피해가 발생하는데 이를 대비한 자동 급속차폐시스템이다. 특히 해저터널의 시공 및 운영에 있어 필수적이라고 할 수 있다. 본 연구는 이러한 문제에 대하여 고안된 팽창구조체를 이용한 급속차폐 자동화 시스템을 실험적으로 검증하였다. 이러한 검증을 하기 위해 모형터널을 40:1 축소율을 적용한 실내모형을 제작하여 0.1 bar, 0.15 bar의 공기압을 주입하여 10 sec, 20 sec로 팽창속도에 따라 나누어 4 case로 실험을 진행하여 누수량, 수압 등을 분석하였다. 연구 결과에 의하면 팽창구조체의 팽창 시 0.1 bar 보다 0.15 bar일 때 차폐효율이 좋았으며 팽창구조체의 공기압 주입 시간에 따른 차폐효율 및 유입수 제어효율의 차이도 나타났다. 본 연구 진행 결과 팽창구조체가 완벽하게 팽창한다는 가정조건에서는 팽창구조체의 내부공기압이 높고 팽창속도가 빠를수록 더욱 효과적으로 나타났다. 본 연구 결과로 향후 추가적인 팽창구조체의 보관방법, 형상과 팽창유도체 및 차폐시 팽창구조체의 이동억제와 유입수 제어에 도움이 되는 쐐기형 구조물에 대한 추가적인 연구가 필요하다.

• 한국전산구조공학회논문집
• /
• 제27권2호
• /
• pp.63-70
• /
• 2014

본 논문에서는 압전 수정진동자의 설계민감도 해석 및 위상 최적설계 기법을 개발하였다. 압전 수정진동자는 가해지는 전하에 의해 두께방향 전단 변형하게 되거나, 혹은 그 반대방향으로 기계 변형에 의해 전기적 신호를 검출하게 된다. 엄밀한 두께방향 전단해석을 위해 두께방향으로 고차 보간을 하는 고차 민들린(Mindlin) 판 이론을 도입하였다. 압전 수정진동자에서 수정판은 부도체이기 때문에 전기적 신호를 검출하거나 전기적 신호에 의해 수정판을 기계적으로 진동시키기 위해 수정판의 상/하 표면에 얇은 전극경을 도포한다. 비록 전극경이 매우 얇기는 하지만 그 무게와 형상에 따라 진동자의 거동이 달라지기 때문에, 설계민감도 해석 및 위상 최적설계를 위한 설계변수는 전극경의 질량 밀도와 관계된다. 따라서 위상 최적설계 문제는 두께방향 전단 변형에너지를 최대화하는 최적의 전극경 분포를 구하도록 구성한다. 또한 보다 의미있는 설계안을 얻기 위해 전극경의 재료량과 면적에 제약조건을 부여한다. 두께방향 전단 주파수(고유치)와 상응하는 모드형상(고유벡터)에 대한 설계구배는 고유벡터 확장법을 이용한 해석적 설계민감도 해석법을 통해 매우 효율적이고 정확하게 계산될 수 있다. 수치예제를 통해 제안된 해석적 설계민감도가 유한차분 설계민감도와 비교하여 매우 효율적이고 정확하게 계산됨을 확인하였다. 또한 위상 최적설계를 통해 도출된 최적 전극경 설계가 모드형상과 두께방향 전단 변형에너지를 개선시킴을 확인하였다.

• 한국농공학회지
• /
• 제31권2호
• /
• pp.125-134
• /
• 1989

This study was conducted to investigate the flexural behaviour of sandwich constructions with cement concrete core and polymer concrete facings. Six different cross-sectional shapes using epoxy based polymer concrete facings were investigated. Some of the results from the static tests are given including the load-deflection responses, load-strain relationships, ultimate moment, and mode of failure. From the. results the following conclusions can be made. 1. The various strengths of polymer concrete were very high compared to the strengths for portland cement concrete, while modulus of elasticity assumed an aspect of contrast. 2. The thickness of core and facing exerted a great influence on the deflection and ultimate strenght of polymer concrete sandwich constructions. 3. The variation shape of deflection and strain depend on loading were a very close approximation to the straight line. The ultimate strain of polymer concrete at the end of tensile side were ranged from 625x10-6 to 766x10-6 and these values increased in proportion to the decrease of thickness of core and facings. 4. The ultimate moments of polymer sandwich constructions were 3 to 4 times that of cement concrete constructions which was transformed same section. It should he noted that polymer concrete have an effect on the reinforcement of weak constructions. 5. Further tests are neede to investigate the shear strain of constructions, and thermal expansion, shrinkage and creep of cement and polymer concrete which were composite materials of sandwich constructions.

• Computers and Concrete
• /
• 제21권4호
• /
• pp.441-449
• /
• 2018

FE models for complex or large-scaled structures that need detailed modeling of structural components are usually constructed using commercial analysis softwares. Updating of such FE model by conventional sensitivity-based methods is difficult since repeated computation for perturbed parameters and manual calculations are needed to obtain sensitivity matrix in each iteration. In this study, an FE model updating procedure avoiding such difficulties by using response surface (RS) method and a Pareto-based multiobjective optimization (MOO) was formulated and applied to FE models constructed with a commercial analysis package. The test building is a low-rise reinforced concrete building that has been seismically retrofitted. Dynamic properties of the building were extracted from vibration tests performed before and after the seismic retrofits, respectively. The elastic modulus of concrete and masonry, and spring constants for the expansion joint were updated. Two RS functions representing the errors in the natural frequencies and mode shape, respectively, were obtained and used as the objective functions for MOO. Among the Pareto solutions, the best compromise solution was determined using the TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) procedure. A similar task was performed for retrofitted building by taking the updating parameters as the stiffness of modified or added members. Obtained parameters of the existing building were reasonably comparable with the current code provisions. However, the stiffness of added concrete shear walls and steel section jacketed members were considerably lower than expectation. Such low values are seemingly because the bond between new and existing concrete was not as good as the monolithically casted members, even though they were connected by the anchoring bars.