• 한국농공학회논문집
• /
• 제60권1호
• /
• pp.59-65
• /
• 2018

The object of this paper was to analyze combined load acting on agricultural reservoir. This study was carried out to 3-D numerical modeling for displacement characteristic and seismic acceleration characteristic. The results of study were analyzed and summarized as follow. It was found that the displacement caused by combined load acting on railway and agricultural reservoir did not reflect the effect of load and the seismic wave consistently. The ground accelerations that occur in railway and dam were amplified because 3-D numerical analysis program interprets ground as an elastic body. Actual ground shows characteristics of elasticity and plasticity, so measured values will show different tendency. As a result of analyzing displacement characteristics, it is considered to be related to stiffness. The Ofunato seismic wave, the displacement (77.1 mm) of the body satisfied the allowable displacement (220 mm), but The Hachinohe seismic wave (282.8 mm) did not. It is considered that displacement caused by combined load is affected not only by acceleration but also by characteristics of materials.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권3호
• /
• pp.779-800
• /
• 2024

Unmanned Aerial Vehicle (UAV) networks, also known as drone networks, have gained significant attention for their potential in various applications, including communication. UAV networks for communication involve using a fleet of drones to establish wireless connectivity and provide communication services in areas where traditional infrastructure is lacking or disrupted. UAV communication networks need to be highly secured to ensure the technology's security and the users' safety. The proposed survey provides a comprehensive overview of the current state-of-the-art UAV network security solutions. In this paper, we analyze the existing literature on UAV security and identify the various types of attacks and the underlying vulnerabilities they exploit. Detailed mitigation techniques and countermeasures for the protection of UAVs are described in this paper. The survey focuses on the implementation of novel technologies like Q-learning, blockchain, IRS, and mmWave. This paper discusses network simulation tools that range in complexity, features, and programming capabilities. Finally, future research directions and challenges are highlighted.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.223-227
• /
• 2006

밀리미터 레이더는 짧은 파장으로 근거리 접촉물을 정밀하게 측정할 수 있기 때문에 미래의 ITS 기술의 안전을 지원하는 핵심기술로써 대두되고 있다. 특히, 차량의 충돌방지용으로 밀리미터 레이더가 대두되며, 사용주파수는 $76\sim77GHz$가 이용되고 있다. 그러나 레이더는 반사에 의한 허상으로 오 신호가 발생할 수 있으며, 시스템간의 상호 간섭을 일으킬 수 있기 때문에 위험을 초래할 수 있다. 그러나 이러한 문제는 전파흡수체를 사용하여 제거할 수 있다. 따라서, 본 논문에서는 차량 충돌방지 레이더용 전파흡수체 개발을 위해 연구가 수행되었으며, 측정된 복소비유전율과 복소 비투자율을 이용하여 시뮬레이션한 결과를 토대로 차량 충돌방지 레이더용 전파흡수체를 제작한 결과 조성비가 Permalloy:CPE=70:30 wt%에서, 두께 1.4mm, $76\sim77$ GHz에서 전파흡수능 18 dB 이상을 획득하였다.

• 대한치과기공학회지
• /
• 제33권2호
• /
• pp.129-136
• /
• 2011

Purpose: The purpose of this study was to investigate the transmittance differences of zirconium core due to thickness within the visible light spectrum. Methods: 36 specimens were divided into 3 groups (0.6mm, 0.8mm, 1.0mm) which have each 12 specimens. The size of specimens was 10mm high and 10mm wide. The transmittance of specimens are measured by spectrophotometer Model Cary 500 that can measure infrared-ray, visible wave and ultraviolet-ray. Results: The results shows that there was no significant difference between specimen's thickness and transmittance. Conclusion: The individual's color perception is personal and there are numerous factors that influence on it. In general, human eye can perceive the color of thing only within visible light spectrum but in this experiment through spectrophotometer there was no big difference between specimen's thickness and transmittance. To sum up, The most important factors were a layed porcelain structure and its thickness rather than core thickness in the porcelain crown.

• 센서학회지
• /
• 제23권1호
• /
• pp.46-50
• /
• 2014

In this paper, we report a novel algorithm based on phase displacement, which supplements conventional TOF methods for distance measurement using an ultrasonic wave. The proposed algorithm roughly measures the distance between the transmission part and the receiving part by using the initial TOF. Thereafter, the precise distance is determined by measuring the phase displacement value between the synchronizing transmission signal and the signal obtained at the receiving end. A distance measurement experiment using a micrometer was performed to verify the accuracy of the ultrasonic wave sensor system. We found that the mean errors from the one adopting the distance measurement algorithm based on phase displacement varied from a minimum of 0.03 mm to a maximum of 0.09 mm. In addition, the standard deviation varied from a minimum of 0.04 mm to a maximum of 0.07 mm, thus giving a precision of ${\pm}0.1$ mm.

• 한국인터넷방송통신학회논문지
• /
• 제18권5호
• /
• pp.103-109
• /
• 2018

5G 목표 중 하나는 기차와 같이 고속으로 이동하는 사용자에 대해 고속의 데이터 속도를 제공하는 것이다. 따라서, High speed train (HST) 시나리오와 같은 높은 이동성 시나리오는 5세대 통신 시스템의 전형적인 시나리오가 될 것으로 예상된다. HST가 급속하게 발전함에 따라 열차 승객에게 무선 통신 데이터를 전송 해야하며, 이용자들의 요구하는 통신 속도는 점차 증가하고 있다. HST 사용자는 현재 HST 통신 시스템의 기능을 벗어나는 위치 또는 속도에 관계없이 높은 네트워크 용량과 안정적인 통신 서비스를 요구한다. 따라서, 5세대 이동통신으로 사용될 mm대역에서 5G 이동통신 시스템에 맞춰 전송 frame을 구성하고 HST 통신 시스템을 구현하고 HST 시나리오에서 광대역 비 정지 MIMO HST 채널에 대한 성능을 분석한다.

• 설비공학논문집
• /
• 제11권4호
• /
• pp.484-491
• /
• 1999

Air side heat transfer and pressure drop for ø9.52 fin-tube heat exchanger with various types of slit and louver fins were measured, and compared with wave-slit fin. Longitudinal and transverse tube spacings of the heat exchangers are 21.65mm and 25mm respectively. Actual heat exchanger was tested using water, and the tests were performed for 2 row heat exchangers with 3 different fin spacings, 1.3, 1.5 and 1.7mm. The overall performance of the enhanced fins was evaluated by comparing heat transfer coefficient with respect to fan power.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.647-650
• /
• 2002

A thermoacoustic refrigerator, using a resonant standing acoustic wave, has been built. It employs a loudspeaker to sustain a standing wave in a resonance tube. The stack of plates is 0.075mm-thick plastic sheet(Mylar), spirally wound to make a 40mm-diameter assembly 80mm long. and two heat exchanger are installed. The refrigerant is Helium gas. The description of thermoacoustic refrigerator are presented. The directly measured performance of the resonator. Tc/Th ( temperature ratio ) and $COP/COP_{c}$, (normalized by carnot's COP ) are plotted versus the thermal load Q applied to the cold end, for various speaker power.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.570-572
• /
• 2012

In this paper, a three-dimensional (3-D) low-loss and wide-band BPF based on low-temperature co-fired ceramic (LTCC) has been presented for mm-wave wireless communication applications. The proposed BPF is designed in a 6-layer LTCC substrate. The double patch resonators are fully integrated into the LTCC dielectrics and vertical via and planar CPW transitions are designed for interconnection between embedded resonators and in/output ports and MMICs, respectively. The designed BPF was fabricated in a 6-layer LTCC dielectric. The fabricated BPF shows a centre frequency (fc) of 53.23 GHz and a 3dB bandwidth of 14.01 % from 49.5 to 56.9 GHz (7.46 GHz). An insertion loss of -1.56 dB at fc and return losses below -10 dB are achieved. Its whole size is $4.7{\times}1.7{\times}0.684mm^3$.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권2호
• /
• pp.29-38
• /
• 2000

Air side heat transfer and pressure drop for f 9.52 fin-tube heat exchanger with various types of slit and louver fins were measured, and compared with wave-slit fin. Longitudinal and transverse tube spacings of the heat exchangers are 21.65 mm and 25mm respectively. Actual heat exchanger was tested using water, and the tests were performed for 2 row heat exchangers with 3 different fin spacings, 1.3, 1.5 and 1.7 mm. The overall performance of the enhanced fins was evaluated by comparing heat transfer coefficient with respect to fan power