• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.15-24
• /
• 2021

In Korea, which is mostly mountainous, the proportion of tunnel and underground space development are increasing. Although the ground is reinforced by applying the ground improvement method during underground space development, accidents still occur frequently in Korea. In the grouting method, a representative ground reinforcement method, the effect was judged by comparing the total amount of injection material with the amount of injection material used during the actual grouting construction. However, it is difficult to determine whether the ground reinforcement is properly performed during construction or within the target ground. In order to solve this problem, it is necessary to study a new method for quality control during or after construction by measuring electrical resistivity after performing grouting by mixing carbon fiber, which is a conductive material, and microcement, which is a grout material. In this study, as a basic study, a cement specimen mix ed with 0%, 3%, 5%, 7% of carbon fiber was prepared to evaluate the performance of the grout material mixed with carbon fiber, which is a conductive material. The prepared specimens were wet curing for 3 days, 7 days, and 28 days under 99% humidity, and then compression wave velocity and shear wave velocity were measured. As a result of the compression wave velocity and shear wave velocity measurement, it showed a tendency to increase with the increase in the compounding ratio of carbon fibers and the number of days of age, and it was confirmed that the elastic modulus and shear modulus, which are the stiffness of the material, also increased.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.693-702
• /
• 2022

The purpose of this study is to present the problems of urban ecosystem imbalance in Seoul and the need to restore housing functions through comparison with Manhattan, New York, which grew earlier than Seoul and has been striving to solve urban problems and restore urban ecosystems. The residential status in urban commercial use areas was investigated through analysis of the total amount of residential space, characteristics of each type of residential building, and distribution of residential buildings. Through this, it can be seen that most of the space in Seoul's historic city center is biased toward commercial roads, and there are significantly insufficient high- and high-density mixed-use buildings suitable for urban dwellings compared to Manhattan's. In addition, it can be seen that the complex building in the historical city center of Seoul is located adjacent to the outskirts of the target site. In conclusion, Seoul's historical city center does not provide an appropriate residential space for creating an urban ecosystem, and it is necessary to come up with measures to restore housing functions.

• Journal of Environmental Health Sciences
• /
• v.49 no.2
• /
• pp.89-98
• /
• 2023

Background: Organophosphorus flame retardants (OPFRs) are a group of chemical substances used in building materials and plastic products to suppress or mitigate the combustion of materials. Although OPFRs are generally used in mixed form, information on their mixture toxicity is quite scarce. Objectives: This study aims to elucidate the toxicity and determine the types of interaction (e.g., synergistic, additive, and antagonistic effect) of OPFRs mixtures. Methods: Nine organophosphorus flame retardants, including TEHP (tris(2-ethylhexyl) phosphate) and TDCPP (tris(1,3-dichloro-2-propyl) phosphate), were selected based on indoor dust measurement data in South Korea. Nine OPFRs were exposed to the luminescent bacteria Aliivibrio fischeri for 30 minutes and the human hepatocyte cell line HepG2 for 48 hours. Chemicals with significant toxicity were only used for mixture toxicity tests in HepG2. In addition, the observed EC_x values were compared with the predicted toxicity values in the CA (concentration addition) prediction model, and the MDR (model deviation ratio) was calculated to determine the type of interaction. Results: Only four chemicals showed significant toxicity in the luminescent bacteria assays. However, EC₅₀ values were derived for seven out of nine OPFRs in the HepG2 assays. In the HepG2 assays, the highest to lowest EC₅₀ were in the order of the molecular weight of the target chemicals. In the further mixture tests, most binary mixtures show additive interactions except for the two combinations that have TPhP (triphenyl phosphate), i.e., TPhP and TDCPP, and TPhP and TBOEP (tris(2-butoxyethyl) phosphate). Conclusions: Our data shows OPFR mixtures usually have additivity; however, more research is needed to find out the reason for the synergistic effect of TPhP. Also, the mixture experimental dataset can be used as a training and validation set for developing the mixture toxicity prediction model as a further step.

• Analytical Science and Technology
• /
• v.21 no.5
• /
• pp.412-423
• /
• 2008

A procedure based on solid-phase extraction (SPE) followed by liquid chromatography-tandem mass spectrometry has been developed for the simultaneous analysis of 55 basic drugs in equine urine. The test scope covers diversified classes of drugs including some ${\beta}$-blockers, ${\beta}$-agonists, antihypotensives, CNS stimulants, sedatives, tranquilizers, antidepressants, antihypertensives and so on. LC-MS/MS separation and quantification was carried out in positive electrospray ionization and multiple reaction monitoring (MRM) mode. Four different brands of mixed mode cation exchange SPE sorbents; UCT XTRACT$^{(R)}$ XRDAH, Supelco DSC-MCAX$^{(R)}$, Varian Bond Elut Certify$^{(R)}$ and Waters Oasis$^{(R)}$ MCX were compared. The UCT XTRACT$^{(R)}$ XRDAH sorbent provided the best results in the preconcentration of samples, yielding relative recoveries higher than 80% except for terbutaline (41.3%), salbutamol (71.5%), heptaminol (70.7%), phenylpropanolamine (66.3%). Detection limits of the target drugs provided by the proposed analytical procedure were between 0.2~8.3 ng/mL.

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.463-472
• /
• 2023

The amount of damage and the area of damage to forest fires are increasing globally, and the effectiveness analysis of the restoration method after the damage is performed insufficient. This study calculated the area of forest fire damage was calculated using Sentinel-2B satellite images and stack map and the intensity of forest fire damage is analyzed according to the forest type. In addition, the vegetation index was calculated using various wavelength bands. Based on the results, the vegetation resilience by the restoration method was quantitatively. As results, areas with a high proportion of coniferous forests suffered high intensity forest fire damage, and areas with a relatively high ratio of mixed and broad-leaved forests tended to have low forest fire damage. Also, artificial forests showed a recovery of about 92.7% compared to before forest fires and natural forests showed a recovery of about 99.6% from the result of analyzing vegetation resilience in artificial and natural forests after forest fires. Accordingly, it was confirmed that natural forests after forest fire damage had superior vegetation resilience compared to artificial forests. It can be proposed that this study is meaningful in providing important information for efficiently restoring the affected target site and the selection criteria for trees to reduce forest fire damage through the evaluation of vegetation resilience by the intensity of forest fire damage and restoration methods.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.2
• /
• pp.66-72
• /
• 2024

In this study, the applicability of CCMs (Carbondioxide conversion capture materials) manufactured by reacting carbon dioxide gas with DG (Desulfurization gypsum) as a cement substitute for secondary concrete products were evaluated and the basic physical properties of CCMs-mixed mortar and concrete specimens were measured to derive the optimal mixing ratio. The main chemical oxides of CCMs were CaO and SO₃, and the main crystalline phases were CaSO₄·2H₂O, Ca(OH)₂, CaCO₃, and CaSO₄. In addition, by the results of particle size analysis and heavy metal measurement, the applicability of CCMs as a cement substitute for secondary concrete products was confirmed. As a result of measuring the strength behavior using mortar and concrete specimens with CCMs, the compressive and flexural strength decreased as the mix ratio of CCMs increased, but requirements by the standards for interlocking blocks and retaining wall blocks, which are target products in this study, were satisfied up to the optimal mixing ratio of 10 wt.% substitution. Therefore, its applicability as a cement substitute for secondary concrete products was confirmed.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.1-8
• /
• 2024

For measuring the performance of passive sonars, we usually consider the maximum Detection Range (DR) under the environment and system parameters in operation. In shallow water, where sound waves inevitably interacts with sea surface or bottom, detection generally maintains up to the maximum range. In deep water, however, sound waves may not interact with sea surface or/and bottom, and thus there may exist shadow zones where sound waves can hardly reach. In this situation, DR alone may not completely define the performance of each sonar. For complete description of sonar performance, we employ the concept 'Robustness Of Detection (ROD)'. In the coastal region of the East Sea, the spatial variations of water masses have close relations with DR and ROD, where the two parameters show reverse spatial variations in general. The spatial and temporal analysis of the temperature by employing the Empirical Orthogonal Function (EOF) shows that the 1-st mode represents typical pattern of seasonal variation and the 2-nd mode represents strength variations of mixed layers and currents. The two modes are estimated to explain about 92 % of the variations. Assuming two types of targets located at the depths of 5 m (shallow) and 100 m (deep), the passive sonar performance (DR) gives high negative correlations (about -0.9) with the first two modes. Most of temporal variations of temperature occur from the surface up to 200 m in the water column so that when we assume a target at 100 m, we can expect detection performance of little seasonal variations with passive sonars below 100 m.

• Molecules and Cells
• /
• v.46 no.11
• /
• pp.688-699
• /
• 2023

We set up this study to understand the underlying mechanisms of reduced ceramides on immune cells in acute rejection (AR). The concentrations of ceramides and sphingomyelins were measured in the sera from hepatic transplant patients, skin graft mice and hepatocyte transplant mice by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). Serum concentrations of C24 ceramide, C24:1 ceramide, C16:0 sphingomyelin, and C18:1 sphingomyelin were lower in liver transplantation (LT) recipients with than without AR. Comparisons with the results of LT patients with infection and cardiac transplant patients with cardiac allograft vasculopathy in humans and in mouse skin graft and hepatocyte transplant models suggested that the reduced C24 and C24:1 ceramides were specifically involved in AR. A ceramide synthase inhibitor, fumonisin B₁ exacerbated allogeneic immune responses in vitro and in vivo, and reduced tolerogenic dendritic cells (tDCs), while increased P3-like plasmacytoid DCs (pDCs) in the draining lymph nodes from allogeneic skin graft mice. The results of mixed lymphocyte reactions with ceranib-2, an inhibitor of ceramidase, and C24 ceramide also support that increasing ceramide concentrations could benefit transplant recipients with AR. The results suggest increasing ceramides as novel therapeutic target for AR, where reduced ceramides were associated with the changes in DC subsets, in particular tDCs.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.467-474
• /
• 2014

Preliminary design in chemical process furnishes economic feasibility through calculation of both mass balance and energy balance and makes it possible to produce a desired product under the given conditions. Through this design stage, the process possesses unchangeable characteristics, since the materials, reactions, unit configuration, and operating conditions were determined. Unique characteristics could be very economic, but it also implies various potential risk factors as well. Therefore, it becomes extremely important to design process considering both economics and safety by integrating process simulation and quantitative risk analysis during preliminary design stage. The target of this study is LNG liquefaction process. By the simulation using Aspen HYSYS and quantitative risk analysis, the design variables of the process were determined in the way to minimize the inherent explosion risks and operating cost. Instead of the optimization tool of Aspen HYSYS, the optimization was performed by using stochastic optimization algorithm (Covariance Matrix Adaptation-Evolution Strategy, CMA-ES) which was implemented through automation between Aspen HYSYS and Matlab. The research obtained that the important variable to enhance inherent safety was the operation pressure of mixed refrigerant. The inherent risk was able to be reduced about 4~18% by increasing the operating cost about 0.5~10%. As the operating cost increases, the absolute value of risk was decreased as expected, but cost-effectiveness of risk reduction had decreased. Integration of process simulation and quantitative risk analysis made it possible to design inherently safe process, and it is expected to be useful in designing the less risky process since risk factors in the process can be numerically monitored during preliminary process design stage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.1
• /
• pp.126-136
• /
• 2016

This study was performed to investigate menu preferences of adult customers for Korean food made from Korean traditional sauces. A total of 962 valid responses were used for data analysis. Statistical analyses were conducted using the SPSS package program (ver 20.0). The results of this study are summarized as follows: overall preferences were highest for braised spareribs, followed by braised short ribs, grilled beef ribs, and bulgogi. On the other hand, overall preferences were lowest in eggplant namul, followed by squid and radish soup, and grazed lotus roots and burdock. Female's overall preferences were significantly higher than male's for nine menu items, including japchae and seasoned acorn starch curd with vegetables, whereas male's overall preferences were significantly higher than female's for 19 menu items, including grilled deodeok and frozen pollack stew. Moreover, the menu item that was most significantly preferred was soybean sprouts soup in subjects aged under 20 years and Korean meatballs in subjects in their twenties. Subjects in their forties showed significantly higher preferences for 15 menu items, including braised hairtail, grilled deodeok, and seasoned and grilled yellow corvina compared to other age groups. Furthermore, menu preferences of production service workers were significantly higher than other groups for frozen pollack stew, loach stew, grilled dried pollack, steamed dry pollack, dried pollack soup, eggplant namul, and seasoned and grilled yellow corvina, whereas menu preferences of official professional workers and students were significantly higher than those of production service workers for braised short ribs, grilled beef ribs, seasoned and simmered chicken, mixed noodles, Korean meatballs, stir-fried rice pasta with vegetables, spicy soft bean curd stew, japchae, mung bean jelly mixed with vegetables and beef, bibimbap, and stir-fried squid. The results show that menu preferences of adults customers differed depending on gender, age, and occupation. In conclusion, the results of this study should provide foodservice managers with information about menu planning for target customers of commercial or non-commercial foodservice cafeterias and recipe development of low-sodium Korean foods.