• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.450-455
• /
• 2008

Previously, we have shown that green tea extract lowers the intestinal absorption of cholesterol, fat, and other fat-soluble compounds. We conducted this study to determine whether green tea extract affects the rate of $^{14}C$-oleic acid esterification into various lipids in the intestinal mucosa of rats. Male Sprague-Dawley ruts were had free access to a nutritionally adequate AIN-93G diet and deionized water. Initially, the rat's mucosal content of total lipids was measured following 1 mL olive oil administration with (green tea group) or without (control group) 100 mg green tea extract powder. At 1 h and 5 h, intestinal segments were extracted for total lipid analysis. Secondly, to measure mucosal esterification rates of lipids, an abdominal incision was made along the midline, and a 10-cm long jejunal segment of the small intestine was ligated in situ. Then, micellar solutions with or without green tea extract were injected into the ligated jejunal segments and incubated for 10 mill. The micellar solution contained $200.0\;{\mu}$ Ci $^{14}C$-oleic acid, $200.1\;{\mu}mol$ unlabelled oleic acid, $66.7\;{\mu}mol$ 2-monooleoylglycerol, $66.7\;{\mu}mol$ palmitoyl-sn-glycero-3-phosphocholine, 2.2 mmol glucose, $50.0\;{\mu}mol$ albumin, and 16.5 mmol Na-taurocholate per L of phosphate buffered saline (pH, 6.3) with or without 8.87 g green tea extract powder. At 10 min, each rat was sacrificed by cervical dislocation under anesthesia and the segment was removed for lipid analysis. Significant differences were observed in mucosal triglyceride content at 1 h and 5 h in ruts given green tea extract. Significant differences in the rate of $^{14}C$-oleic acid esterification into triglycerides and phospholipids fractions were observed between control and green tea groups. However, There were no significant differences in other lipid fractions. These results indicate that the lowered esterification rates of $^{14}C$-oleic acid into triglycerides and phospholipids fractions is attributable to presence of green tea extract. This may be associated with an inhibitory effect of green tea catechin on the mucosal processes of lipids, leading to the inhibition of intestinal absorption of lipids.

• Clean Technology
• /
• v.24 no.1
• /
• pp.77-84
• /
• 2018

In this study, $Li_4Ti_5O_{12}$ anode materials for lithium ion battery were synthesized by dry ball-mill method. Polyvinyl chloride (PVC) as a carbon source was added to improve electrochemical properties. When the PVC was added after $Li_4Ti_5O_{12}$ formation, the spinel structure was well synthesized and it was confirmed by X-ray diffraction (XRD) experiments. When the carbon material was added before the synthesis and the heat treatment was performed, it was confirmed that a material having a different crystal structure was synthesized even when a small amount of carbon material was added. In the case of $Li_4Ti_5O_{12}$ without the carbon material, the electrical conductivity value was about $10{\mu}S\;m^{-1}$, which was very small and similar to that of the nonconductor. As the carbon was added, the electrical conductivity was greatly improved and increased up to 10,000 times. Electrochemical impedance spectroscopy (EIS) analysis showed that the size of semicircle corresponding to the resistance decreased with the carbon addition. This indicates that the resistance inside the electrode is reduced. According to the Cyclic voltammetry (CV) analysis, the potential difference between the oxidation peak and the reduction peak was reduced with carbon addition. This means that the rate of lithium ion insertion and deinsertion was increased. $Li_4Ti_5O_{12}$ with 9.5 wt% PVC added sample showed the best properties in rate capabilities of $180mA\;h\;g^{-1}$ at 0.2 C-rate, $165mA\;h\;g^{-1}$ at 0.5 C-rate, and $95.8mA\;h\;g^{-1}$ at 5 C-rate.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.269-274
• /
• 1995

The basic composition of Mn-Zn ferrite was $Mn_{0.631}Zn_{0.316}Fe_{2.053}O_{4}$(specimen A), $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) and $Mn_{0.538}Zn_{0.308}Fe_{2.154}O_{4}$(specimen C) with additional 0.1 mol % $CaCo_{3}$ and 0.04 mol % $V_{2}O_{5}$. For high per¬meability and acceleration of grain growth, $CaCo_{3}$ and $V_{2}O_{5}$. was added. The mixture of the law materials was calcinated at $950^{\circ}C$ for 3 hours and then milled. The compacts of toroidal type were sintered at different temperature($1250^{\circ}C$, $1300^{\circ}C$, $1350^{\circ}C$) for 2 hours in $N_2$ atmosphere. The effects of the various raw material composition and sintered temperature on the physical properties of Mn-Zn ferrite have been investigated. They turned out to be spinel structure by X-ray diffraction and the size of grain from SEM was from $18\;\mu\textrm{m}\;to\;23\;\mu\textrm{m}$. As the sintering temperature was increased from $1250^{\circ}C$ to $1350^{\circ}C$, the initial permeability and magnetic induction has increased and the both of Q factor and coercive force has decreased. The coercive force and curie temperature were almost the same at each specimen Their values were about 0.45 Oe and $200^{\circ}C$. The frequency of specimen will used in the range from 200 kHz to 2 MHz. The basic composition of $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) sintered at $1300^{\circ}C$ shows the best results at magnetic induction (Br & Bm).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.55-66
• /
• 2018

The cactus habitat in Jeju Island has a phytogeographically specific distribution in the East Asian region, and forms a unique landscape as the only native cactus (Opuntia ficus-indica (L.) Mill.) habitat in Korea. However, there has been no detailed investigation on the distribution of cacti in the habitat and no investigation on the diversity of the mixed composition of plants in the habitats and their correlation with the distribution of cactus populations. This study attempted to investigate the diversity of vascular plants in the Wollyeong-ri cactus habitat and record the actual distribution and trends of cactus distribution. In addition to the distribution characteristics of cacti, we also discuss the characteristics of species reflecting the characteristics of the habitat among the mixed population of plant species, as well as the biological and environmental factors that threaten the maintenance of cactus populations or require management for preservation of cacti. Considering the phenological character, we conducted the field surveys for flora identification six times between June 2015 and September 2017. The Engler classification system was used for the arrangement sequence and names of plants, and the Korean Plant Names Index was adopted for the Korean name of the species. The study results showed that the Wolryung-ri cactus habitat in Jeju Island has the characteristic physiognomy of an area dominated by cactus. For the vascular plants, a total of 125 taxa were identified, including 53 families, 104 genera, 109 species, 15 varieties and 1 forma. Endangered plants specified by the Ministry of Environment were not found. Two species, Cyrtomium falcatum and Asplenium incisum, were identified as the ferns, and no gymnosperms were found. In addition, 123 taxa of angiosperms, 91 taxa of dicotyledones and 32 taxa of monocotyledons were identified. The distributions of cacti were confirmed in 289 meshes corresponding to 59.3% of the total 487 meshes in the cactus protected area, which showed various coverage distributions ranging from 5% to 95%. Most of the meshes where no cacti were found are coastal areas with exposed basalt rocks where the soil depth has not developed or extremely restricted due to repeated waves, or areas where artificial facilities, grasslands, and observation paths have been constructed. On the other hand, there were 71 lattice points in 14.5% of the total area where the cactus showed 70% or higher dominance. Cacti are randomly distributed in these areas. They have adapted to the microhabitat environment and are found to be opportunistically distributed along the growable locations. Considering that the reproduction of cacti in the habitat is mostly dependent on parthenogenesis, the present distribution seems to reflect the potentially distributable regions of cacti in the habitat. Based on the results of field surveys, a management plan for conservation and protection of the protected areas has been proposed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.1
• /
• pp.17-27
• /
• 2013

The effects of chlorine dioxide gas ($ClO_2$) treatments between high-concentration-short-time and low-concentration-long-time on maintaining the quality of cherry tomatoes (Lycopersicon esculentum Mill. cv 'unicorn') were investigated. Tomatoes were treated with 5 ppm for 10 min and 10 ppm for 3 min as high-concentration-short-time $ClO_2$ gas treatment conditions and 1 ppm for once a day interval in terms of low-concentration-long-time $ClO_2$ gas treatment condition, respectively. After $ClO_2$ gas treatments, tomatoes were storage at 5 and $23^{\circ}C$ for 7 days. Weight loss, changes in tomato color, firmness, soluble solids content, pH, growth of total microorganism, and decay rate were evaluated. On day 7, tomatoes treated with chlorine dioxide gas showed low values of respiratory rate, total microbial growth, and decay rate compared to those of tomato without chlorine dioxide gas treatment. Additionally, tomatoes treated the chlorine dioxide were kept the values of firmness and soluble solids content during storage. However, chlorine dioxide gas treatment on tomatoes had no direct effect on weight loss, pH, and color. Results showed that both $ClO_2$ concentration and treatment time played the important roles for keeping the quality of tomatoes during storage. Tomatoes with chlorine dioxide gas treatment of low-concentration-long-time had more effective values of firmness, the total microbial growth, and decay rate than those with two chlorine dioxide gas treatments of high-concentration-short-time. Results suggest the potential use of chlorine dioxide gas treatment of low-concentration-long-time as an highly effective method for keeping the freshness of cherry tomato.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.21-28
• /
• 2011

Hibiscus cannabinus L is a plant in the Malvaceae family. Kenaf was seeded at June 1st in 2010 and harvested at November 18th and dried and evaluated worth as a bulking agent for livestock composting. Harvested and dried Kenaf was divided into the bast, core and leaf. All materials were grinded by hammer mill and the moisture absorption, moisture evaporation, pH, volume weight and C/N ratio were measured. Kenaf was higher water absorption and evaporation ability than those of sawdust and chaff. The pH values of Kenaf were pH $2.8{\pm}0.01$ - $4.34{\pm}0.02$, which is lower pH value than those of sawdust (pH $5.28{\pm}0.01$) and chaff (pH $6.3{\pm}0.02$). The C/N ratio of Kenaf showed 649 of core, 204 of bast and 70 of leaf, which were lower than sawdust (789.1) but higher than chaff (132). In volume weight test, the materials were divided by particle size of Kenaf, named as group A(${\geq}4cm$), B(${\leq}4cm$, ${\geq}0.25cm$) and C(${\leq}0.25cm$). The volume of weight of group A and B for core, bast and leaf showed similar, but group C showed higher than those of sawdust and chaff. Especially, the volume weight of group C for leaf was 5 times higher than those of sawdust and chaff. This study suggested the possibility of using Kenaf as a bulk agent for composting of livestock manure. This is considered that strengthen the competitiveness of farmers through reducing the cost, prevention of environmental pollution caused by livestock manure and environmentally friendly processing of livestock manure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.339-344
• /
• 2006

A lot of organic wastes have been produced from diverse industries, they must be tested by the regulation of fertilizer control act if reuse the organic wastes for agricultural utilization. The regulation has had only two criteria; the content of organic matter and 8 heavy metals. This study was conducted to evaluation trace element (boron, cobalt, molybdenum, and selenium) and distribution of organic compounds with different classification for complement the regulation in 16 organic waste materials(62 samples) collected from different regions and industries. Contents of boron(leather industry sludge, $154.2mg\;kg^{-1}$; food company sludge, $57.1mg\;kg^{-1}$), cobalt(industrial area sewage sludge, $95.2mg\;kg^{-1}$; metropolitan sewage sludge, $22.9mg\;kg^{-1}$), molybdenum(metropolitan sewage sludge, $40.1mg\;kg^{-1}$; food company sludge, $16.8mg\;kg^{-1}$), selenium (fiber industry sludge, $28.1mg\;kg^{-1}$; leather industry sludge, $16.9mg\;kg^{-1}$; food company sludge, $15.9mg\;kg^{-1}$) were highest compare to the other organic wastes. Total PAHs contents were the highest in paper-mill manufacture($3,462ug\;kg^{-1}$), and among the 16 PAHs, naphthalene, phenanthrene, pyrene, fluoroanthene, Anthracene and acenaphthene were detected more clearly than others in all kinds of organic resources.

• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.479-487
• /
• 2018

The purpose of this study is to analyze photochemical activity of nursery seedlings under drought stress, using chlorophyll fluorescence reaction analysis. Young nursery seedlings of tomato (Lycopersicon esculentum Mill.) and cucumber (Cucumis sativa L.), were grown under drought stress for 8 days. Analysis of chlorophyll fluorescence reaction (OJIP) and parameters, were performed to evaluate photochemical fluctuation in nursery seedlings under drought stress. Chlorophyll fluorescence reaction analysis showed maximal recorded fluorescence (P) decreased from the 5 day after treatment in tomato seedlings, while an amount of chlorophyll fluorescence increased at the J-I step. Thus, physiological activity was reduced. In cucumber seedlings, maximal recorded fluorescence (P) and maximal variable fluorescence ($F_V$) lowered from the 4 day after treatment, and chlorophyll fluorescence intensity of J-I step increased. Chlorophyll fluorescence parameter analysis showed electron transfer efficiency of PSII and PSI were significantly inhibited with decreasing $ET2_O/RC$ and $RE1_O/RC$ from the 5 day after treatment, in tomato seedlings and from the 4 day after treatment, in cucumber seedlings. $ET2_O/RC$ and $PI_{ABS}$ significantly changed. In conclusion, 6 indices such as $F_V/F_M$, $DI_O/RC$, $ET2_O/RC$, $RE1_O/RC$, $PI_{ABS}$ and $PI_{TOTAL}ABS$ were selected for determining drought stress in nursery seedlings. Drought stress factor index (DFI) was used to evaluate whether the crop was healthy or not, under drought stress. Cucumber seedlings were less resistant to drought stress than tomato seedlings, in the process of drought stress.

• Journal of the Daesoon Academy of Sciences
• /
• v.27
• /
• pp.283-317
• /
• 2016

This research is an attempt to detail the multi-layered ethical characteristics of 'mutual beneficence', shown in the principle of 'guarding against self-deception' in Daesoon Thought while focusing on its major differences as well as the similarities with Kantian and Utilitarian ethical views. In these Western ethical perspectives, the concept of self-deception has received a considerable amount of attention, centering on the context of natural rights and contract theory. Meanwhile, in Daesoon Thought, 'guarding against self-deception' is presented as one of the principal objectives as well as the method or deontological ground for practice. It further encompasses the features of virtue ethics oriented toward the perfection of Dao. Here, the deontological aspect is interlinked with the concept of cultivation and the pursuit of ethics and morals. Hence this makes it a necessary condition for achieving the perfection of Dao, and likewise renders the practice of 'guarding against self-deception' more active through facilitating mutual relations based on the expansion model wherein human nature is characterized as possessing innate goodness. With regard to the tenet of 'resolution of grievances for mutual beneficence,' this concept is presented as a positive ground for practicing virtues toward others without forming grudges. Furthermore, as long as it reveals the great principle of humanity built on conscience, it will come to harmonize practitioners with others and spirits in an expression of beneficence. Moreover, originating in the Dao of Deities, guarding against self-deception is expressed as a form of life ethics and can be suggested as a new alternative for the model of virtue ethics proposed by Nussbaum. All in all, there is a natural causal relationship by which 'guarding against self-deception' in accord one's own conscience and the principle of humanity as a pursuit of perfect virtues in Dao result in the fulfillment of mutual beneficence. This readily akin to how gravity causes water to flow from high ground to low ground. Consequently, these relational features of mutual beneficence can serve an effective alternative to the Western ethical views which also address the need to overcome the egoistic mind which is liable to self-interest and alienation.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.1
• /
• pp.3-44
• /
• 1986

In order to obtain the basic physical and mechanical properties of steel wire reinforced particleboard, particleboards were formed with large particles through 2.11 mm (12 meshes) and retained on 1.27mm (20 meshes) sieves and small particles through 1.27mm (20 meshes) and retained on 0.42mm (60 meshes) sieves from the plywood mill wastes of meranti (Shorea spp.) in the form of pallmanchips, applying urea-formaldehyde resin as an adhesive on the particle surface in 10 percent on the oven dried weight of particles, and arranging steel wires of 1mm in diameter 5,10,15,20, and 25mm in longitudinal and transverse direction with crossing in the mid of the board depth in single layer boards, 10mm in longitudinal or transverse direction without crossing in two layers and 10mm in longitudinal and transverse directions with and without crossing in three steel wire layers boards. The stepwise 9-minutes-multi-pressing schedule in 5 minutes at 35 kgf/$cm^2$, 2.5 minutes at 25 kgf/$cm^2$. and 1.5 minutes at 15 kgf/$cm^2$ was applied for $300{\times}200{\times}13$mm board at the temperature of 160$^{\circ}C$ in a hot press. Specific gravity, thickness swelling, bending properties of modulus of rupture (MOR), modulus of elasticity(MOE), work to proportional limit, and work to ultimate load, internal bond (IB), and screw holding power(SHP) of the reinforced boards were analyzed on the wire openings and wire layers. The results obtained are summarized as follows; 1) In specific gravity, particleboards with large particles and small particles had higher value with more steel wire placements and more steel layers composition, 2) Particleboards with large particles in accordance with more steel wire liners composition gave very poor thickness swelling. 3) The mechanical properties of particleboards formed with large or small particles were reinforced with more steel wire layers. Therefore, bending strength was improved in modulus of rupture, modulus of elasticity, and work to ultimate load. Especiallv, particleboards with two or three steel wire layers showed the tension lamination effect when the steels in lower steel wire layer were oriented parallel to the board length. 4) The modulus of rupture, modulus of elasticity, and work to ultimate load in bending varied with opening area, distance of lengthwise wires multipled by distance of transverse wires. Particleboards formed with large particles resulted in higher value in modulus of rupture with 1.5-3 $cm^2$ opening area, 1-2cm distance between transverse wires, and 1.5-2.5cm distance between lengthwise wires. Particle boards formed with small particles showed higher value with 0.5-1.5$cm^2$ or 3.75-6.25 $cm^2$ opening area, 0.5 or 2.5cm distance between transverse wires. 5) In modulus of elasticity, particleboards formed with large particles with one steel wire layer suggested higher value with 5-3$cm^2$ opening area, 1-2.5cm distance between transverse wires and also 1-2.5 cm distance between lengthwise wires. Particleboards formed with small particles showed higher value with 0.75-1.25$cm^2$ or 3-6.25$cm^2$ opening area and 0.5 or 2.5cm distance between transverse wires. 6) Particleboards formed with large particles gaved higher value in work to ultimate load with 1-3$cm^2$ opening area. Particleboards formed with small particles showed increasing tendancy with decreasing opening area. 7) In internal bond and screw holding power, particleboards formed with large particles had increasing value in two and three steel wire layers compositions, but particleboards formed with small particles showed no difference. Particleboards formed with large particles containing one steel wire layer showed no difference in internal bond and screw holding power, and particleboards formed with small panicles containing one steel wire layer resulted in increasing value in internal bond and decreasing value in screw holding power in accordance with increase in opening area.