• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.245-248
• /
• 2005

During manufacturing thick composite cylinders, large thermal residual stresses are developed and induce catastrophic interlaminar failures. Since the residual stresses are dependent on many process parameters, such as temperature distribution during cure, cure shrinkage, winding tension, and migration of fibers, calculation of the residual stresses is very difficult. Therefore a radial-cut method have been used to measure the residual stresses in the composite cylinders. But the conventional radial-cut method needs to know numerous material properties which are not only troublesome to obtain but also vary with change of fiber arrangement during consolidation. In this paper, a new radial-cut method with cut-cylinder-bending test was proposed and the measured residual stresses were compared with calculated thermal residual stresses. It was found that the new radial-cut method which does not need to know any of material properties gave better estimation of residual stresses regardless of radial variation of material properties. Additionally, interlaminar tensile strength could be obtained by the cut-cylinder-bending test.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.659-662
• /
• 2009

본 연구는 건축자재로 널리 사용되는 PVC 바닥상재 표면의 오염성 및 정전기로부터 보호하기 위하여 기존에 사용하는 광경화형 우레탄-아크릴 수지에 내오염/대전성을 향상시킨 광경화형 내오염 코팅액 개발에 관한 것이다. PVC 바닥상재용으로 사용되는 내오염성이 없는 우레탄-아크릴 수지에 4가 암모늄을 사용한 수용성 대전방지제와 아크릴용 대전방지제, 폴리우리탄용 대전방지제를 수지의 양 대비 함량(wt%) 5~20%로 변화하여 첨가한 후 1000rpm에서 30분간 고속 배합하여 수지의 내오염/대전성을 향상시킨 내오염 코팅액을 제조하였다. 제조한 내오염 코팅액은 코팅 층의 두께조절이 가능한 코팅(Bar-coating)을 사용하여 PVC 바닥상재에 코팅 한 후 내오염성, 대전성, 부착력, 코팅두께 등의 코팅 층 표면물성을 평가하였다. 연구결과, 수지에 수용성대전방지제 15%를 혼합하여 제조한 코팅액을 Bar-coater No.12로 코팅한 코팅표면이 전기저항($3.24{\times}10^9{\Omega}/cm^2$), 내오염도(매직 Test, 먼지부착 Test) 및 부착력(100%) 모두 가장 좋은 물성을 보였으며, 전반적으로 함량이 많을수록 전기저항과 오염도에서 우수한 것으로 나타났다. 그러나 대전방지제가 과량으로 들어간 경우 migration 현상이 보이는 것을 알 수 있었다.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.47-53
• /
• 2015

By the trends of electronic package to be more integrative, the fine Cu trace pitch of organic PCB is required to be a robust design. In this study, the short circuit failure mechanism of PCB with a Cl element under the Temperature humidity bias test ($85^{\circ}C$/85%RH/3.5V) was examined by micro-structural study. A focused ion beam (FIB) and an electron probe micro analysis (EPMA) were used to polish the cross sections to reveal details of the microstructure of the failure mode. It is found that $CuCl_x$ were formed and grown on Cu trace during the $170^{\circ}C$/3hrs and that $CuCl_x$ was decomposed into Cu dendrite and $Cl_2$ gas during the $85^{\circ}C$/85%RH/3.5V. It is suggested that Cu dendrites formed on Cu trace lead to a short circuit failure between a pair of Cu traces.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.331-337
• /
• 2016

Purpose: The purpose of this study is the analysis of the failure mechanisms effect of circuit design characteristics of the ballast for LED Lamp Methods: Recently, electronic circuit of ballasts for LED lamp are being occurred on various failure mechanisms (whiskers, ion migration, heat dissipation problem, switching element damage) because electronic ballast circuit design characteristics are becoming more and more diverse. Results: we analysis failure mechanisms that occurs in accordance with the circuit design characteristics The ballast for LED lamp were divided into three different types (Type A, Type B, Type C) considering circuit design characteristics (thermal design, PCB patten spacing, element material) and it was experimented in the acceleration test conditions ($85^{\circ}C$, 85% R.H). Conclusion: We confirmed that failure mechanism of the ballast for LED Lamp had occurred differently in accordance with the circuit design characteristics.

• Geotechnical Engineering
• /
• v.13 no.2
• /
• pp.9-16
• /
• 1997

Cut-off methods of controlling leachate migration from waste landfills and contaminated sites are studied. Permeability and chemical compatibility tests are prrforlned on slurry wall materials including soil-bentonite, cement-bentonite, cement / fly ash-bentonite, plastic concrete. Hydraulic conductivity of soil-bentonite mixture is the lowest of these four bacuill materials. The leachate from municipal solid waste has little influence on the permeability of the backfill materials. The bentonite slurry becomes flocculated and aggregated when exposed to the leachate. The results of the permeability test showed that the hydraulic conductivities of the backfill materials are in the order soil-beiltonite, Plastic concrete, cement-bentonite. And the result c: the compatibility test showed increase in permeability due to the effects of leachate. Thus, in designing the slurry wall it is essential to check the behaviour of the bentonite slurry and backfill materials on the compatibility with the contaminants.

• Journal of Chest Surgery
• /
• v.46 no.3
• /
• pp.237-239
• /
• 2013

An ectopic thyroid is caused by abnormalities in migration of the thyroid during development and rarely occurs in the thoracic cavity or the abdominal cavity. We report the case of a 64-year-old female who had abnormal findings from a thyroid hormone test during follow-up after thyroid cancer surgery. Based on the radioisotope diagnostic test, an ectopic thyroid inside the thoracic cavity was suspected. Through surgical treatment, the patient was diagnosed with ectopic intrapulmonary thyroid. Ectopic intrapulmonary thyroid is reported to be very rare and the case is described along with a literature review.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.63-67
• /
• 2003

Electromigration characteristics of $SnAg_3Cu_{0.7}$ and eutectic SnPb solder were studied using thin stripe-type test structures. Significant changes in the microstructure of two solders were observed after electromigration test, in which the temperature and the current density were varied from 90 to $110^{\circ}C$ and from $4.0\times10^4\;A/cm^2\;to\;9.2\times10^4\;A/cm^2$. In SnAgCu solders, hillocks were main]y observed near the anode end. From resistance measurements, it was calculated that the activation energy of the SnAgCu solder for electromigration was 1.04 eV And in eutectic SnPb without the effect of pads, while depleted region was found near cathode end, Sn-rich hillocks were observed near the anode end. During eutectic SnPb electromigration, it were observed that electromigration behavior had two migration modes.

• Korean Journal of Animal Reproduction
• /
• v.3 no.1
• /
• pp.41-47
• /
• 1979

This experiment was carried out to clarify the methods of the F-body test in human and the B-body test in buil and hog. The effect of pH and albumin concentration on the migration of X- and Y- sperm was also investigated. The results obtained were summarized as follows: 1. In the human semen, the frequency of sperm in which an F-body is visible was different by the fluorochrome. Namely, in case of quinacrine mustard, the F-body frequency was 48.8∼43.4 percent (average 49.6%), and in case of quinacrine dihydrochloride, that was 40.7∼50.8 percent (average 42.0%). 2. The frequency of a, pp.rance of B-body was 43.4${\pm}$1.3 percent in bull semen, and 45.5${\pm}$0.7 percent in hog semen. 3. A, pp.arance of B-body in bovine semen was increased due to duration of time after washing till 12 hours. 4. Separation of X- and Y- spermatozoa using diluents with different hydrogen ion concentration was impossible. 5. A, pp.arance of B-body separated in medium with 6, 10 and 20% ovalbumin was 51.1${\pm}$2.4, 50.6${\pm}$2.5 and 58.2${\pm}$3.0 percent, respectively, and those values were significiantly higher (p<0.01) than corresponding control values.

• Geotechnical Engineering
• /
• v.13 no.4
• /
• pp.75-84
• /
• 1997

In this paper, the retardation capacity of marine clay and weathered soil of seashore waste landfill is analyzed by using a laboratory column apparatus for organic and inorganic components which can represent the components of the leachate of municipal waste landfill. The results show that sorption capacity marine clay for potassium is larger than that of weathered soil. Lead and cadmium are adsorbed completely at concentrations higher than the real concentrations developed in the landfill. The bottom soils of seashore landfill can also retard some nondegradable components of organics although their sorption capacities for organics were less than those for inorganics.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.4
• /
• pp.183-186
• /
• 2015

This research investigates the impact of charge spreading on the data retention of three-dimensional (3D) silicon-oxide-nitride-oxide-silicon (SONOS) flash memory where the charge trapping layer is shared along the cell string. In order to do so, this study conducts an electrical analysis of the planar SONOS test pattern where the silicon nitride charge storage layer is not isolated but extends beyond the gate electrode. Experimental results from the test pattern show larger retention loss in the devices with extended storage layers compared to isolated devices. This retention degradation is thought to be the result of an additional charge spreading through the extended silicon nitride layer along the width of the memory cell, which should be improved for the successful 3-D application of SONOS flash devices.