• Journal of Embryo Transfer
• /
• v.26 no.4
• /
• pp.287-296
• /
• 2011

Mammalian fertilization is a complex cascade process consisting of sperm migration through the female reproductive tract, physiological changes to sperm such as sperm capacitation and acrosome reaction, and sperm-egg interaction in the oviduct in vivo. On the other hand, in vitro fertilization (IVF) is a process by which egg cells are fertilized by sperm outside the body: in vitro. IVF has been used for a variety of purposes in reproductive biotechnology for human and animals. The discovery of sperm capacitation in 1951 promoted the development of IVF technology. In the initial stage of IVF, sperm capacitation in preincubation medium was shown to be essential to fuse with eggs. Besides, sperms should detour some of the in vivo regulations for IVF. This review introduces a general mammalian fertilization process, including sperm capacitation, removal of cumulus matrix, acrosome reaction, and sperm-egg fusion and focuses on the roles of key biochemical molecules, signal mechanisms, and genes involved during IVF and novel results of sperm-oocyte interaction elucidated in various gene-knockout mice models.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.413-416
• /
• 2005

The study has been performed on the improvement of bonding process and bond strength of HTPB propellant and liner using a polymeric curative. In case of liner using polymeric curative prepared from reaction of HTPB and TDI, migration of curative was decreased at bond interface. So EPDM insulation sanding and Desmodur RE coating process could be omitted in motor case preparation and bond strengths between the HTPB propellant and liner were increased. Also deterioration phenomena of bond strength could not be observed in accelerated aging test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.2
• /
• pp.110-114
• /
• 2006

The study has been performed on the improvement of bonding process and bond strength of HTPB propellant and liner using a polymeric curative. In case of liner using polymeric curative prepared from reaction of HTPB and TDI, migration of curative was decreased at bond interface. So EPDM insulation sanding and Desmodur RE coating process could be omitted in motor case preparation and bond strengths between the HTPB propellant and liner were increased. Also deterioration phenomena of bond strength could not be observed in accelerated aging test.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.588-595
• /
• 2009

The knowledge of grain growth of carbide particles is very important for manufacturing micrograined cemented carbides. In the present study, continuous and discontinuous grain growth in WC-Co and WC-VC-Co cemented carbides is investigated using the Monte Carlo computer simulation technique. The Ostwald ripening process (solution/re-precipitation) and the grain boundary migration process are assumed in the simulation as the grain growth mechanism. The effects of liquid phase fraction, grain boundary energy and implanted coarse grain are examined. At higher liquid phase content, mass transfer via solid/liquid interfaces plays a major role in grain growth. Growth rate of the implanted grain was higher than that of the matrix grains through solution/re-precipitation and coalescence with neighboring grains. The results of these simulations qualitatively agree with experimental ones and suggest that distribution of liquid phase and carbide particle/carbide grain boundary energy as well as contamination by coarse grain are important factors controlling discontinuous grain growth in WC-Co and WC-VC-Co cemented carbides. The contamination by coarse grains must by avoided in the manufacturing process of fine grain cemented carbides, especially with low Co.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1421-1435
• /
• 2004

When various work was given from user, the existing mobile agent model migrated from node to node and process the work at the point that much traffics according to passive routing schedule are happened, until it makes service the work result, time cost of round work process for the distributed nodes are increased. Therefore, the existing agent systems need migration method to solve the problems of agent size increment or a lack of interoperability among agent systems. To solve these problems in this thesis, we design and implement an CORBA-based Mobile Agent Model(CMAM) for the efficient work process into the distributed nodes, when the mobile agents are migrated among the nodes, using an optimal path search by sensing of network traffic.

• International Journal of Human Ecology
• /
• v.4 no.1
• /
• pp.71-86
• /
• 2003

Over the past few decades, changes in patterns of behavior (e.g., diet, smoking, alcohol consumption, and physical activity) have led to major changes in health status, characterized by increases in obesity, Type II diabetes mellitus, cardiovascular disease, and some cancers. This epidemiologic transition is largely the result of rapid increases in immigration to developed countries and rural-urban migration within developing countries, which is usually accompanied by environmental and lifestyle changes. In particular, adoption of “Western” dietary patterns, which tend to be high in fat and low in fruits and vegetables, is of concern since diet is a potent contributor to chronic disease risk. However, until recently, the process by which immigrants and rural-urban migrants adopt the dietary practices predominant in their new environments, known as dietary acculturation, has received very little research attention. Dietary acculturation is multidimensional, dynamic, and complex, and varies considerably depending on a variety of personal, cultural, and environmental characteristics. Therefore, to intervene successfully on the negative aspects of dietary acculturation, it is important to understand the process and identify factors that predispose and enable it to occur. The purpose of this article is to provide a practical model for understanding and investigating the effect of dietary acculturation on food and nutrient intake. Thus, this report 1) gives an overview of acculturation, 2) defines dietary acculturation and presents a model for how it occurs, 3) discusses measurement issues around dietary acculturation,4) reviews the literature on dietary acculturation in Korean Americans; 4) suggests a paradigm for acculturation research; and 5) offers some recommendations for future research in this area.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.1
• /
• pp.24-29
• /
• 2005

Chemical mechanical polishing (CMP) has been widely accepted for the global planarization of multi-layer structures in semiconductor manufacturing. Copper has been the candidate metallization material for ultra-large scale integrated circuits (ULSIs), owing to its excellent electro-migration resistance and low electrical resistance. However, it still has various problems in copper CMP process. Thus, it is important to understand the effect of the process variables such as turntable speed, head speed, down force and back pressure are very important parameters that must be carefully formulated in order to achieve desired the removal rates and non-uniformity. Using a design of experiment (DOE) approach, this study was performed investigating the main effect of the variables and the interaction between the various parameters during CMP. A better understanding of the interaction behavior between the various parameters and the effect on removal rate, non-uniformity and ETC (edge to center) is achieved by using the statistical analysis techniques. In the experimental tests, the optimum parameters which were derived from the statistical analysis could be found for higher removal rate and lower non-uniformity through the above DOE results.

• International Journal of Computer Science & Network Security
• /
• v.22 no.3
• /
• pp.252-258
• /
• 2022

Globalization, development of the information society, intensification of migration processes, and internationalization of education in recent years have significantly affected the international labour market and increased competition between professionals in various fields. Academic, research and teaching staff are currently facing rapid changes and growing demand for quality educational services. Under such conditions, educational institutions around the world pay particular attention to improving the quality of the educational process in order for their graduates to be able to compete in the international labour market. The study of the experience of teachers' professional training in advanced countries opens new opportunities for improving the system of pedagogical training in Ukraine in order to adapt it to the requirements of the European educational space. The progressive achievements of countries demonstrating a high level of teachers' professional training in accordance with international standards, having rich historical educational traditions are of considerable scientific interest; consequently, this contributes to their leadership in science and education at the regional and global levels. The purpose of the present academic paper lies in analysing the latest trends in exploring teaching experience in the European countries and performance review of passing by students and teachers of the program on studying of pedagogical practice and experience of teaching in the countries of Europe. Methodology. Analytical and empirical (questionnaire) methods were used in the research process. Results. According to the obtained results of the research, the advantages, the most common areas of educational programs and the wishes of the participants regarding the practical implementation of the experience were identified.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.79-80
• /
• 2007

Copper has been used as an interconnect material in the fabrication of semiconductor devices, because of its higher electrical conductivity and superior electro-migration resistance. Chemical mechanical polishing (CMP) technique is required to planarize the overburden Cu film in an interconnect process. Various problems such as dishing, erosion, and delamination are caused by the high pressure and chemical effects in the Cu CMP process. But these problems have to be solved for the fabrication of the next generation semiconductor devices. Therefore, new process which is electro-chemical mechanical planarization/polishing (ECMP) or electro-chemical mechanical planarization was introduced to solve the. technical difficulties and problems in CMP process. In the ECMP process, Cu ions are dissolved electrochemically by the applying an anodic potential energy on the Cu surface in an electrolyte. And then, Cu complex layer are mechanically removed by the mechanical effects between pad and abrasive. This paper focuses on the manufacturing of ECMP system and its process. ECMP equipment which has better performance and stability was manufactured for the planarization process.

• Toxicological Research
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2008

Ptdlns(4,5)$P_2$ is a key cellular phosphoinositide that localizes in separate and distinctive pools in subcellular membrane and vesicular compartments. In membranes, Ptdlns(4,5)$P_2$ acts as a precursor to second messengers and is itself a main signaling and targeting molecule. Specific subcellular localization of type I PIP kinases directed by interacting with specific targeting module differentiates Ptdlns(4,5)$P_2$ production in a spatial and temporal manner. Several lines of evidences support the idea that Ptdlns(4,5)$P_2$ is generated in very specific pools in a spatial and temporal manner or by feeding Ptdlns(4,5)$P_2$ directly to effectors. In this concept, the interaction of PIPKI isoforms with a specific targeting module to allow precise subcellular targeting modulates highly specific Ptdlns(4,5)$P_2$ synthesis and channeling overall effectors. For instance, localization of PIPKI${\gamma}$661 to focal adhesions by an interaction with talin results in spatial and temporal production of Ptdlns(4,5)$P_2$, which regulates EGF-stimulated directional cell migration. In addition, Type $I{\gamma}$ PIPK is targeted to E-cadherin in cell adherence junction and plays a role in controlling dynamics of cell adherence junction and endocytosis of E-cadherin. Characterizing how PIP kinase isoforms are regulated by interactions with their targeting modules, as well as the mechanisms by which their product, Ptdlns(4,5)$P_2$, exerts its effects on cellular signaling processes, is crucial to understand the harmonized control of numerous cellular signaling pathways. Thus, in this review the roles of the Ptdlns(4)P(5) kinases and Ptdlns(4,5)$P_2$ were described and critically reviewed in terms of regulation of the E-cadherin trafficking, cell migration, and formation of cell adherence junction which is indispensable and is tightly controlled in epithelial-to-mesenchymal transition process.