• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.780-785
• /
• 2007

Korean Train Express (KTX) has opened to commercial traffic since 2004 at maximum speed 300km/h, and Korea High-speed Railway (HSR-350x) was developed by Korean government, several institutes, and related companies. HSR-350x is now being investigated its performance and tested at the high speed line. In 2004 December, HSR-350x was run over 350km/h and proved its running performance. These high speed railways have 12 motors to transfer the traction effort or the braking force. In this paper, authors propose the construction the measurement system for monitoring the force transferred to the train from the motor. The system is installed to the tripod shaft which is located between the reduction gears and it measures the mechanical load directly.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.4
• /
• pp.149-161
• /
• 1990

In this study, an optimal shape design was performed on a fillet model which is subject to surface traction through minimizing the maximum stress of the fillet. A 2-dimensional quadratic isoparametirc element with 8 nodes was used in stress analysis for finite element method, and Hooke-Jeeves direct search algorithm was adopted for optimi- zation. From the resulting optimal shape, it was found that the maxium von Mises stress on the boundary of fillet was reduced by 36%, compared to other paper in which the cross sectional area of fillet was minimized. In conclusion, a real optimal fillet shape could be obtained in the viewpoint of yielding, and more pratical fillet design could be accomplished.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.972-973
• /
• 2008

본 논문은 3상 2여자 방식의 출력성능을 개선하기 위한 새로운 통전각 확장방식에 관한 연구이다. 제안된 토크제어 방식은 정격토크 이하에서는 기존의 $120^{\circ}$ 통전 PWM 방식으로 토크를 제어하고, 정격토크 이상에서는 출력 증대를 위해 통전각 확장을 통하여 토크를 제어하는 새로운 토크제어 알고리즘을 제안하였다. 또한 PSIM을 이용한 시뮬레이션을 통하여 제안된 방식의 타당성을 검증하였다.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.418-423
• /
• 2011

This paper presents a simulation model and a parameter identification scheme of an induction motor drive for electric vehicle. The induction motor in automotive applications should operate in very high efficiency and achieve the maximum-torque-per-ampere (MTPA) feature even with saturated magnetic flux under very high torque. The indirect vector control which is typically adopted in traction drive system requires precise information of motor parameters, particularly rotor time constants. This work models an induction motor considering magnetic saturation and proposes an empirical identification method using the current controller in the synchronous reference frame. The proposed method is applied to a 22kW-rated induction motor for electric vehicle.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1112-1114
• /
• 2006

Tilting train has been developed to increase the operational speed of the trains on conventional lines which have many curves. This train are tilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant, so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper show that results of normal capacity calculations of the electrical equipments such as Main transformer, PWM converter, VVVF inverter, traction motor in TTX(tilting train express) with maximum operation speed 180km/h

• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.4
• /
• pp.39-46
• /
• 1988

The purpose of this paper is to apply the boundary element method to predict the crack growth path. The quarter point element with traction singularity at the crack tip is applied to compact tension type specimens and two inclined slit problems under compression load. The maximum stress criterion which was originally derived for the crack initiation is extended to the analysis of the crack propagation. The predicted crack paths with 1/4 crack growth increment of initial crack length agree quite well with experimental results. It is found that the computed crack path of the boundary element analysis is not mainly affected by the crack increment length.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1892-1896
• /
• 2008

Inverter-fed induction motors (IFM) are prevalent in traction vehicles. However, the winding insulation of IFM is substantially more stressed than of line-powered motors by surge voltages. Consequently, the winding insulation of IFM should be estimated by surge voltages. Also, the weakness of coil insulation can be detected by the surge voltage test. This paper described the insulation evaluation of induction motors by application of surge voltages. A surge voltage generator with the maximum voltage of 5 kV and the selectable rise-time in ranges of $50\;ns\;{\sim}\;500\;ns$ was fabricated. In the experiment, we applied surge voltages into induction motors with the magnitude and the risetime according to IEEE 522. By the analysis of applied surge voltage and current waveforms, we could find difference between normal and defection windings.

• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.335-341
• /
• 2009

To predict efficiency of interior permanent magnet synchronous motor (IPMSM) for traction motor and to cope with the risk of demagnetization in the permanent magnets, accurate iron loss analysis and understanding of the characteristic of the iron loss are very important at motor design stage. In this paper, we present the method to estimate the iron loss for the IPMSM considering the driving conditions such as both field weakening control and maximum torque per ampere control.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.502-509
• /
• 1998

The scheme to reduce jerking phenomena in one push-pull type trainset was proposed. To simulate the jerking between coaches, dynamic analysis model was made. This model could analyze longitudinal dynamic behavior between locomotives and coaches caused by spring and damping characteristics of couplers and center pivots; characteristic curves of traction and braking. To validate the analysis results, tests were conducted in the same driving and braking condition. Comparison of longitudinal acceleration between simulation and test results shows a good agreement. To minimize the jerking phenomena, lots of dynamic simulations were conducted with varying driving/braking effort curve. From the results of simulations, an efficient and economic way to reduce jerking phenomena was found to be to reduce slope of tractive effort curve and synchronize braking time between locomotives and coaches. Test results show that this way could reduce the jerking Phenomena. To express jerkins Phenomena quantitatively, maximum peak to peak values of acceleration were used.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.777-784
• /
• 2016

In this paper, the performance design and analysis for an Interior Permanent-Magnet Synchronous Motor (IPMSM) that will be used as a traction motor in the e-4WD system of hybrid SUV(Sports Utility Vehicle) and RV(Recreational Vehicle), are investigated using finite element method. In order to improve the accuracy of design, the tolerances of parts and assemblies as well as the material properties of permanent magnet, stator, rotor and winding etc. are considered under the conditions similar to real driving state of motor. Both no load performance test and maximum load performance test, in which real driving state and cooling condition have been considered, are also implemented via proto sample build to verify the validity of motor's performance design.