• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.291-296
• /
• 2021

This study examined the effects of the forward head posture on the maximum mouth opening of the jaw joint and the muscle activity and asymmetry of the temporalis and masseter. The craniovertebral angle was measured in 50 subjects (23.10±2.73 years) who met the selection requirements of the study. The maximum mouth opening, muscle activity, and muscle asymmetry were measured by reducing 0%, 10%, and 20%. As the craniovertebral angle decreased, the maximum mouth opening decreased (p<.001), the muscle activity of the right and left temporalis decreased (p<.001), and the muscle activity of the left temporalis also decreased. (p<.01). The asymmetry rate of the added muscles of the left and right temporalis, left and right temporalis, and masseter increased according to the change in condition (p<.01). The results of this study are expected to help establish a treatment strategy and comprehensive diagnosis for the temporomandibular joint and present a theoretical basis of manual therapy and therapeutic exercises used for the treatment of TMD.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.270-277
• /
• 2003

Thermal performance of flip chip bonding with Sn-3.5Ag solder ball was studied. The temperature distribution was measured with IR(InfraRed) camera of 25 urn resolution. The measurement shows that most of the samples had much higher maximum temperature than average temperature. With central heater and 2.5 (W), the difference between maximum and average temperature is over $80^{\circ}C$. The distribution was influenced by the location of heater, the distance from heater to flip chip bonding, and the passivation opening of solder bumps. To reduce the maximum temperature, the bigger passivation opening, the smaller chip size, and the closer location of heater to flip chip bumps are preferrable.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.7
• /
• pp.66-71
• /
• 2021

In this study, the shape design optimization of a refrigerator door hinge stopper was performed to reduce the discrepancy in the opening forces of the left and right doors of a double-door refrigerator. A finite element model was constructed and analyzed by quasi-static analyses to evaluate the structural performance of the door hinge stopper. The reaction moment calculated at the hinge axis was used as a measure of the door opening and closing forces. The design objective is to increase the door opening force by 50% while maintaining the door closing force and the maximum stress calculated in the body of the hinge stopper at the current level. A new design concept with a contacting slot was proposed to decouple the door closing and opening forces. Shape optimization was performed to determine the dimensions of the new design of the hinge stopper, and the rib pattern was determined by topological optimization to further increase the door opening force. It was observed that the new design met all design requirements.

• Physical Therapy Korea
• /
• v.26 no.3
• /
• pp.99-105
• /
• 2019

Background: Although magnetic resonance imaging is accurate, it is expensive to measure the movement of temporomandibular joint. The three-dimensional (3D) motion analysis system is an inexpensive measurement tool. Objects: This study examined the reliability of quantifying the mouth opening and lateral mandibular shift and differences between individuals with and without temporomandibular disorder (TMD) using the hygienic method of surface markers on the skin with 3D ultrasound-based motion analysis. Methods: This study included 24 subjects (12 with and 12 without TMD). Temporomandibular joint motion during mouth opening was recorded using two surface markers with 3D ultrasound-based motion analysis. An intraclass correlation coefficient [ICC (3,k)] was used to confirm the intrarater reliability of quantifying kinematic temporomandibular joint motion, and an independent t-test was used to evaluate differences in maximal mouth opening and lateral mandibular shift between the two groups. Results: Assessment of mouth opening and lateral mandibular shift showed excellent test-retest reliability with low standard error of measurement. The lateral mandibular shift and opening-lateral mandibular shift ratio were significantly increased in the TMD group during maximum mouth opening (p<.05). However, no significant difference in maximal mouth opening was observed between the groups with and without TMD (p>.05). Conclusion: This hygienic and simple surface marker method can be used to quantify the mouth opening and lateral mandibular shift at the end-range of mouth opening. The TMD group showed an increased lateral mandibular shift movement at the end-range of mouth opening. The lateral mandibular shift movement can be regarded as a symptom in the diagnosis and treatment of TMD.

• Journal of Oral Medicine and Pain
• /
• v.22 no.1
• /
• pp.95-109
• /
• 1997

The purpose of this research is to investigate the influence on mandibular movements and TMJ sounds with changes of head and neck posture. For the research, twenty patients who had complained of TMJ sounds without any other symptoms of cranio-mandibular disorders, were selected as subjects for measurements of TMJ sounds, and radiographs on transcranial view of TMJ were taken on ten of the subjects. From NHP, UHP, DHP and FHP, aspects of mandibular movement and TMJ sound were investigated from each posture. Aspects of mandibular movement and TMJ sound were observed by measuring total vibration energy(Integral), peak amplitude, maximum amound of mouth opening, and TMJ sound-emitting point using Sonopak for windows (version 1.33) and Bio-EGN(Bioresearch Inc. WI. U.S.A.). Head and neck movement-measuring instrument, CROM(perfomance attainment Inc. U.S.A.) was to maintain even head posture. Degrees of inclination of UHP and DHP were determined at 30' and distance of FHP was 4cm. The results obtained were as follows. 1. Total vibration energy and peak amplitude of TMJ sounds were decreased more on UHP and on UHP and increased more on DHP and FHP than that on NHP. 2. At the maximum mouth opening, distance of TMJ sound-emitting point were decreased more on UHP and increased more on DHP and FHP than that on NHP. 3. The amounts of the maximum mouth opening were increased more on UHP and decreased more on DHP and FHP than that on NHP. 4. For the changes of the head posture with mouth opening observed in radiograph, condylar head was positioned more lower-anteriorly on UHP, and more upper-posteriorly on DHP and FHP than that on NHP. From the results obtained as above, considering positive influence of the change of head and neck posture, avoiding down-head and forward-head posture, and recommending upper- head posture can prevent the progress of temporomandibular disorder and lead to successful treatment for the patients with temporomandibular joint sounds.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.2
• /
• pp.127-134
• /
• 2020

Purpose: The aims of this study were (1) to investigate the relationship between the characteristics of allogenic bone block and the compressive strength of an allogenic bone block measured by biomechanical experiments, and (2) to compare the maximum pressure load of allogenic bone block with the gap pressure measured at the high tibial opening osteotomy. Materials and Methods: Ten patients who provided informed consent for gap pressure measurements during opening wedge high tibial osteotomy (OWHTO) were included. The gap pressures were measured at 1 mm intervals while opening the osteotomy site from 8 mm to 14 mm. Seventeen U-shaped allogenous wedge bone blocks were made from the femur, tibia, and humerus. The height, width, cross-sectional area, and cortex thickness of the bone blocks were measured, along with the maximum compressive load just before breakage. The relationship between these characteristics and the maximum pressure load of the bone blocks was evaluated. The gap pressures measured in OWHTO were compared with the maximum pressure loads of the allogenous wedge bone blocks to evaluate the possibility of inserting allogenous wedge bone blocks into the osteotomy site without a distractor in OWHTO. Results: The OWHTO gap pressure increased with increasing osteotomy site opening. The mean gap pressure, which occurred at a 14-mm opening, was 282±93 N; the maximum pressure was 427 N. The maximum pressure load of the allografts was 13,379±6,469 N (minimum, 5,868; maximum, 29,130 N) and was correlated significantly with the cortical bone thickness (correlation coefficient=0.693, p=0.002) and cross-sectional area (correlation coefficient=0.826, p<0.001). Depending on the sterilization method, the maximum pressure loads for the bone blocks were 13,406±5,928 N for freeze-dried and 13,348±7,449 N for fresh frozen. The maximum compressive load of the allogenous wedge bone blocks was 13.7-times greater than that in OWHTO opened to 14 mm (5,868 N vs. 427 N). Conclusion: The compressive strength of allogenous wedge bone blocks was sufficiently greater than the gap pressure in OWHTO. Therefore, allogenous wedge bone blocks can be inserted safely into the osteotomy site without a distractor.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.955-962
• /
• 2006

This paper has the objects of deciding dynamic instability regions of thick plates on Pasternak foundation by finite element method and providing kinematic design data for mats and slabs of building structures. In this paper, dynamic stability analysis of tapered opening thick plate is done by use of Serendipity finite element with 8 nodes considering shearing strain of plate. To verify this finite element method, buckling stress and natural frequencies of thick pate with or without in-plane stress are compared with existing solutions. The results are as follow that this finite element solutions with 4x4 meshes are shown the error of maximum 0.56% about existing solutions, and obtained dynamic instability graph according with variation of opening positions.

• Tunnel and Underground Space
• /
• v.28 no.4
• /
• pp.358-371
• /
• 2018

The stability of openings in the underground mine is major concern in the operation of mines that must ensure productivity and safety. Among many rock conditions affecting cavities stability, the width and height of the opening is an important design factor. In this paper, we consider to determine the maximum unsupported span of a opening in a limestone mine by using the Q system among several rock classification schemes. In order to determine the span of the unsupported opening in the limestone mine, rock mass classifications were carried out at over 200 sites in the underground limestone mines. The relationships by using the Q system and the stability graph proposed by Mathews to determine the maximum span of the unsupported opening were derived and compared. We propose a new classification method that combines GSI and RMR rock classification systems to make it easy to use in a field.

• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.67-88
• /
• 1992

The purpose of this study was to investigate the changes of mandibular movement and muscle activity following orthognathic surgery in patients with mandibular prognathism. Lateral cephalogram, M.K.G., E.M.G. recordings were obtained immediately before surgery, and 2 months and 8 months after surgery. Among the patients who received orthognathic surgery, 19(13 men, 6 women) were selected for this study. Statistical analysis for each time interval differences were performed with the SPSS package. The results were as follows: 1. Compared with the pre-operative group (opening 349.7mm/sec, closing 313.1mm/sec), the mean values of the maximum opening and closing velocity in the skeletal Class III surgery group were significantly decreased in the 2 months post-operative (opening 232.9mm/sec, closing 206.9mm/sec), but the values tended to increase in the 8 months post-operative group (opening 280.9 mm/sec, closing 319.1mm/sec). 2. Compared with the pre-operative group (61.7 mm/sec), the maximum velocity of the terminal tooth contact increased in the 2 months (72mm/sec) and 8 months (105.7mm/sec) postoperative groups. 3. In the mean value of vertical freeway space, there was significant difference between the normal group and the pre-operative group, but not between the normal group and the 8 months post-operative group. 4. In the mean values of the maximum opening, the maximum anterio-posterior movement from centric-occlusion, and the lateral deviation from centric occlusion, there was no significant difference between the normal group and the surgery group (the pre-operative and the 8 months post-operative groups). 5. The mature swallowing pattern was 58% in the pre-operative group, but 90% in the 2 months post-operative group, and 63% in the 8 months post-operative group. 6. In the comparison of muscle activity, there was no significant difference between the normal group and the surgery group during the rest position. However, during cotton roll clenching, there was significant difference between the normal group and the pre-operative group, but not between the normal group and the 8 months post-operative group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.119-135
• /
• 1987

For the determination of instantaneous centre of rotation in the mandibular movement, the habitual opening path was recorded on the sagittal tracing plate by a Gnathorecorder attached on the lower anterior teeth which was designed for this study. The opening path was demonstrated mathematically and the instantaneous centre of rotation in the opening path were calculated and plotted by computer programs, and then a computer graphic movement of the mandible was obtained according to the opening path. The hinge path of posterior border movement was graphied by the Gnathorecorder as well and demonstated mathematically. This hinge path was compared with the same obtained by Visitrainer to prove a reliability of the Gnathorecorder. The results obtained from this study were as follows. 1. The habitual opening path and hinge path obtained from the Gnathorecorder movement were expressed mathematically as follows: $y=0.11x^2-0.66x+3.09$ (equation of opening path), $y=0.04x^2+0.21x+3.71$ (equation of hinge path), and a kinematic hinge axis was not shown in the equation of kings path. 2. The early habitual opening movement of the mandible demonstrated almost a straight opening path or an arc motion with the larger radius and it's centre of rotation moved parallelly in the more rear and lower position than a kinematic hinge axis. 3. Instantaneous centre of rotation occured along with the translation of the condyle, and mandible was rotated around an axis in the close to the maximum opening and then moved toward the forward and upward position. 4. There were some similarities between the articular eminence and the movement pattern of a special point which was the kinematic hinge axis.