A Study on the Determination of Instantaneous Centre of Rotation in the Mandibular Movement

하악골 운동의 순간회전 중심결정에 관한 연구

  • Kang, Keun-Su (Department of Prosthodontics, College of Dentistry Chosun University) ;
  • Yoon, Chang-Keun (Department of Prosthodontics, College of Dentistry Chosun University)
  • 강근수 (조선대학교 치과대학 보철학교실) ;
  • 윤창근 (조선대학교 치과대학 보철학교실)
  • Published : 1987.12.01

Abstract

For the determination of instantaneous centre of rotation in the mandibular movement, the habitual opening path was recorded on the sagittal tracing plate by a Gnathorecorder attached on the lower anterior teeth which was designed for this study. The opening path was demonstrated mathematically and the instantaneous centre of rotation in the opening path were calculated and plotted by computer programs, and then a computer graphic movement of the mandible was obtained according to the opening path. The hinge path of posterior border movement was graphied by the Gnathorecorder as well and demonstated mathematically. This hinge path was compared with the same obtained by Visitrainer to prove a reliability of the Gnathorecorder. The results obtained from this study were as follows. 1. The habitual opening path and hinge path obtained from the Gnathorecorder movement were expressed mathematically as follows: $y=0.11x^2-0.66x+3.09$ (equation of opening path), $y=0.04x^2+0.21x+3.71$ (equation of hinge path), and a kinematic hinge axis was not shown in the equation of kings path. 2. The early habitual opening movement of the mandible demonstrated almost a straight opening path or an arc motion with the larger radius and it's centre of rotation moved parallelly in the more rear and lower position than a kinematic hinge axis. 3. Instantaneous centre of rotation occured along with the translation of the condyle, and mandible was rotated around an axis in the close to the maximum opening and then moved toward the forward and upward position. 4. There were some similarities between the articular eminence and the movement pattern of a special point which was the kinematic hinge axis.

Keywords