• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.744-749
• /
• 2011

Silicon oil in viscous fluid damper has a viscoelastic feature that show stiffness besides damping. These properties depend on frequency and are non-linear. A lot of research has been conducted in order to identify viscoelastic damper with mathematical model. Fractional Derivative Maxwell Model has been widely used, but this model did not explain the effect of damper size change on the damper performance. In this paper, the experimental study was conducted to validate damper's dynamic behaviors when total damper's size is changed while maintaining same aspect ratio and orifice size.

• 소음진동
• /
• 제7권2호
• /
• pp.261-272
• /
• 1997

Recently washing machines are to be in lower vibration and lower sound because of better environment. Vibration problems in washing machines occur in both washing mode and spinning mode, but vibration in spinning mode becomes main problem because of its high rotating speed and continuity. Vibration while spinning is mainly due to rigid body motion of total washing system which includes suspending rods, washing bath, spinning bath, and gear sets. In this study, some researches were done in order to analyze the rigid body motion of washing system and flexible vibration of spinning bath. A basic mathematical model was established, and the effect of position of salt water and shape change of salt water case were considered. And the effect of lengths of suspending rods, attaching angles, vertical and horizontal position, stiffness of spring on the change of vibration were also considered. To identify the effect of salt water on vibration, some measurements were done. When salt water was positioned at upper part, the effect was most and this coincides with the tendency of simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.386-388
• /
• 2001

The change of the electricity charge from cost base to price base due to the introduction of the electricity market competition causes consumer to choose a variety of charge schemes and a portion of loads to be affected by this change. Besides, it is required the index that consolidate the price volatility experienced on the power exchange with gaming and strategic bidding by suppliers to increase profits. Therefore, in order to find a mathematical model of the sensitively-responding-to-price loads, the price-sensitive load model is needed. And the development of state-of-the-art technologies affects the electricity price, so the diffusion of high-efficient end-uses and these price affect load patterns. This paper shows the analysis on learning curves algorithms which is used to investigate the correlation of the end-uses' price and load patterns.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.435-437
• /
• 2001

The change of the electricity charge from cost base to price base due to the introduction of the electricity market competition causes consumer to choose a variety of charge schemes and a portion of loads to be affected by this change. Besides, it is required the index that consolidate the price volatility experienced on the power exchange with gaming and strategic bidding by suppliers to increase profits. Therefore, in order to find a mathematical model of the sensitively-responding-to-price loads, the price-sensitive load model is needed. And the development of state-of-the-art technologies affects the electricity price, so the diffusion of high-efficient end-uses and these price affect load patterns. This paper shows the analysis on learning curves algorithms which is used to investigate the correlation of the end-uses' price and load patterns.

• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.21-23
• /
• 2011

Uniformity of plasma etching processes critically depends on the wafer temperature and its distribution. The wafer temperature is affected by plasma, chucking force, He back side pressure and the surface temperature of ESC(electrostatic chuck). In this work, 3D mathematical modeling is used to investigate the influence of the geometry of coolant path and the temperature distribution of the ESC surface. The model that has the coolant path with less change of the cross-sectional area and the curvature shows low standard deviation of the ESC surface temperature distribution than the model with the coolant path of the larger surface area and more geometric change.

• 동력기계공학회지
• /
• 제18권2호
• /
• pp.77-82
• /
• 2014

The air spring is widely used in various fields such as a suspension system and an anti-vibration system because the natural frequency is kept constant regardless of the change in the load, spring constant is easy to change, and, vibration and shock isolation performance are excellent. The purpose of this study is to derive a nonlinear governing equation of an air spring, to analyze the effect of the various parameters on the dynamic stiffness of the air spring, and, to suggest a more efficient design method of an air spring system. In order to do so, this study investigates the impact of all the parameters that could affect the dynamic stiffness of the air spring while changing the excitation amplitude and the frequency with a developed governing equation.

• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.153-160
• /
• 2010

In this paper, effects of information sharing in multi-level supply chain management have been studied through simulation. The simulation model consists of a manufacturing company as a center, three suppliers, two logistic centers, and three different retail supply lines of each logistics centers. The mathematical model and the simulation were developed when real-time information sharing occurs and does not occur in supply chain under the assumption that each company applies (s, S) inventory policies. In addition, this paper analyzed the effects of the change of variables related to total costs, which compose of total ordering cost, total transportation cost, total carrying cost and shortage cost that are caused by the change of demand of three different patterns with the way of information sharing.

• 한국지능시스템학회논문지
• /
• 제11권8호
• /
• pp.736-741
• /
• 2001

변형된 영상을 다시금 최적영상을 복원하는 것은 여러 영상변환의 복합적인 변환, 그 것의 역변환과 많은 다중 해의 계산을 요구하게 된다. 본 연구에서는 가공기의 운전 전이나 운전 중에 가공기의 외란-진동, 이동, 기계적 특성-에 능동적으로 대치하고 동시에 복잡한 수학적인 수식전개를 피하고, 인공지능인 기법인 퍼지논리(Fuzzy Logic)를 적용하여 전문가적인 경험지식을 바탕으로 보정이 가능함을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.502-508
• /
• 2000

The amount of container freight is continuously increasing recently, but freight congestion problem frequently occurs at ports due to low efficiency of container crane in transportation and cargo handling. In this paper, a method for designing a fuzzy controller of the container crane system is presented. In this scheme a mathematical model for the system is obtained in state space representation. The response of the proposed fuzzy controller is compared with that of the optimal controller at the same condition. Through the simulation results, the performance of the fuzzy controller was observed better than that of optimal controller in respect of reference change, disturbances and parameter change. The fuzzy controller was also more stable and robust than the optimal controller.

• Kyungpook Mathematical Journal
• /
• 제46권1호
• /
• pp.145-152
• /
• 2006

In this paper, we study a class of strongly nonlinear implicit complementarity problems in the setting of Hilbert spaces H (not necessarily Hilbert lattices). By using the property of the projection and a suitable change of variables, we establish the equivalence between the strongly nonlinear implicit complementarity problem and the fixed point problem in H. Moreover, we use this equivalence and the fixed point theorem of Boyd and Wong to prove the existence and uniqueness of solutions for the strongly nonlinear implicit complementarity problem in H.