• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.243-250
• /
• 2010

Purpose: This study evaluated the effect of different screw tightening sequences and methods on detorque values in a well-fitting implant superstructure. Materials and methods: A fully edentulous mandibular master model and a metal framework directly connected to four parallel implants (Astra Tech) with a passive fit to each other were fabricated. Six stone casts were made with a splinted impression technique to represent a 'well-fitting' situation with the metal framework. Detorque values were measured twice after screw tightening using 20 Ncm. Detorque values and minimum detorque values for three screw tightening sequences (1-2-3-4, 2-4-3-1, and 2-3-1-4) and for two tightening methods (two-step and one-step) were analyzed using multi-way analysis of variance and two-way analysis of variance, respectively, at a .05 level of significance. Results: The mean detorque values for screw tightening sequences ranged from 12.8 Ncm (2-4-3-1) to 13.1 Ncm (2-3-1-4), and for screw tightening methods were 13.1 Ncm (two-step) and 11.8 Ncm (one-step). The mean of mimimum detorque values for screw tightening sequences were 11.1 Ncm (1-2-3-4) and 11.2 Ncm (2-4-3-1 and 2-3-1-4), and for screw tightening methods were 11.2 Ncm (two-step) and 9.9 Ncm (one-step). No statistically significant differences among three screw tightening sequences were found for detorque values and for mimimum detorque values. But, statistically significant differences between two screw tightening methods were found for two values. Two-step screw tightening method showed higher detorque value (P = .0003) and higher minimum detorque value (P = .0035) than one-step method. Conclusion: Within the limitations of this study, the screw tightening sequence was not a critical factor for the detorque values in a well-fitting implant superstructure by the splinted impression technique. But, two-step screw tightening method showed greater detorque values than one-step method.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.31-42
• /
• 2009

Purpose: As the number of domestic medical institutions installing PET/CT is increasing rapidly, the transfer of PET/CT images among medical institutions is also increasing. Thus, it is necessary to collect the comparative SUV data from several medical institutions' PET/CT systems through a phantom study which semi-quantitatively compares the SUV on one bed, the change scale of the SUV on the slices, and the time of measuring. The phantom study to find differences among the SUVs from various PET/CT offers the opportunity to obtain the reliability of the SUV in PET/CT images. Materials and Methods: Ten PET/CT systems from medical institutions in Korea were used. To obtain the accurate data, the study has been using the radiation detector of Korea Research Institute of Standards and Science to verify. The internal structures of NEMA $phantom^{TM}$ were removed and Six thousand milliliters of distilled water which has 1mCi of $^{18}F$-FDG put into the phantom. The water was properly integrated with $^{18}F$-FDG using magnetic stirrer. The images were acquired at 60, 70, 80, 90, 100, 110 and 120-minutes for 3 minute each. Two hundred square centimeters of region of interests were placed and analyzed. To confirm the usefulness, the correction-table came out from patients' data. Results: The coefficient of variability of the SUV from -11.0 to 9.90 % fell into the range of international standards(${\pm}10%$) along with the SUV on a bed, the change scale of the SUV on the slices, and the time of measuring, except one PET/CT system. Using the data of the differences among the SUVs, we came to withdraw the correction-table ranging from 0.803 to 1.246. The correction-table was confirmed its usefulness through Linear Regression Analysis which was applied to normal cases. Conclusions: Although studies have been made on the variation of the SUV, there is little attention on the standardization of the SUV. Based on this study of the quantitatively comparable data about the SUV accommodating the correction-table, it would help to have more corrective diagnosis.

• Archives of design research
• /
• v.15 no.4
• /
• pp.67-76
• /
• 2002

This study is mainly based on the introduction process of formative art education method of Korean Bauhaus which was brought in this CQuntry through Japan. The introduction routes into Korea of Bauhaus education method by way of the United States through Germany have been disclosed since 1945, including Korean students studying in the United States as well as Scandinavian countries. Those introduction of Bauhaus method by Korean students into Korea had influenced the domestic university education. However, it was worth notice that Park Hui-rak pointed out through his writing that Bauhaus education method had already existed in the CQuntry before 1945 when korea was liberated from 35 years of Japanese colonial rule. Park hinted in his book of "Korean Design History,199B" that the curriculum of primary school, then affiliated with Taegu Education College had been possibly influenced from Composition Education" idealogy led by Japanese Kawakita Rensichiro. In Japan, Bauhaus education method had been independently introduced by civilians like primary school teachers of Kawakita. However, the possible introduction of the informative art education in the country by way of Japan leaves a lot of things to be considered. Because, the introduction was carried out by Choson governor-General which took charge of colonial rule of korea. Accordingly, the purpose of this study is to make full explanation on the introduction of formative art education and on the types. For that purpose, examinations on various materials and information released by many educational institutes as well as by choson Governor-General were included. As the result, it was possible to find out a trace of "Composition Education : Japanese Bauhaus Formative Art Education" in 1937, one year earlier pointed out. And it was remarkable that two interested books were found out, which mainly dealt with Spanung of Composition and Dynamic sense. Finally, through examinations in many aspects, five drawing education books written in 1930s, such as Drawing Guide Details and indication, were proved to be equal to Bauhaus Composition Education in terms of terminology and contents. Moreover, it has been made clear that Composition education Choson was made mostly under the control and management of Choson Governor-General in the of books on education systems in then education college.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.85-94
• /
• 2006

In the 2000s, character animation technique is used at domestic TV character animation ads of diverse items displaying new character patterns and expression techniques of a high level. This study intends to identify the characteristics of TV character animation ads based ell character aesthetic theory and advertising rhetoric theory, and based on these findings, analyze trend and stream of expression in TV character animation ads by examining and classifying advertisements released in the past four years by items, character patterns and expression techniques. The results showed that TV character animation ads have been concentrated on confectionery, beverages and foods in the past, but the items have been diversified through the years. With reference to character patterns, personal and animal characters had made the main pattern, but recently product, virtual and composite characters are on the increase. In expression techniques, cell animation technique was found to be the most frequently used technique, which was followed by full-3D, cell and live action, cell and 3D and the clay animation technique. A trend like this suggests that TV character animation advertising items will continue to increase in line with the participation level of targets. In the meantime, personal and animal characters will continue to make the leading character pattern, while virtual and composite character patterns emerge in new forms. In expression techniques, live action combined with 30 technique and techniques using new expression materials will appear with cell animation technique as a central figure. As a whole, Korean character animation advertisement is expected to keep on growing to a new dimension in the aspect of items, character patterns and expression technique.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.17-30
• /
• 2006

The early Joseon Dynasty is very important period of studying about Korean history of ceramics because various kinds of porcelain were produced like celadon, brown porcelain, white porcelain, inlaid white porcelain, blue porcelain etc, $\ulcorner$sejongsilrok$\lrcorner$ $\ulcorner$Jiriji$\lrcorner$ was published and Saongwon established its branch. Moreover, there also had a sudden political change to Joseon Dynasty, so ceramic industry in Gangjin was closed and artisans in Gangjin scattered to find safer place. One of these place was Imiwueri and Chuhyunri, Joongmohyun in Sangju.(the name of the place in that times, now Modongmyun) Also, Sangju in Gyeongsangbuk-Do is one of the places where can get materials for producing white porcelain, so artisans in Gangjin could migrate to the place during change of regime to Joseon Dynasty which based on Sung Confucianism. In $\ulcorner$Tejongsilrok$\lrcorner$, it mentioned specific areas like Joongmo, Hwaryeong in Sangju, Gyeongsang-Do and we can find out about situations of ceramic production in the early 15 centuries with producing dishes for a Royal family. $\ulcorner$Sejongsilrok$\lrcorner$ $\ulcorner$Jiriji$\lrcorner$ mentioned Imiwueri and Chuhyunri and Sangju produced the half of porcelains. In $\ulcorner$Gyeongsangdojiriji$\lrcorner$, Sangju takes charge of 8 spots which is one third of ceramic production. $\ulcorner$Gyeongsangdojiriji$\lrcorner$ and $\ulcorner$Sejongsilrok$\lrcorner$ $\ulcorner$Jiriji$\lrcorner$ were published with same goals at the same year. In $\ulcorner$Gyeongsangdosokchanjiriji$\lrcorner$, there was deleted nine spots which included high, middle, low level compared with $\ulcorner$Seiongsilrok$\lrcorner$ $\ulcorner$Jiriji$\lrcorner$, and in $\ulcorner$Donggukyeojiseungram$\lrcorner$ there was entirely deleted the locations of porcelain spots and potteries.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.167-174
• /
• 2005

This study is to objectively support the emotional and intuitional decision making of the designer by means of developing the supporting models and tools of color coordination. Based on the color grouping system and representative vocabularies suggested in the precedent 'Study on the Grouping System of Fabric Color,' this study suggested the manufacture of the supporting model of color coordination that could be used practically through the design of coloring group. The results of this study can be summarized as below. Firstly, 687 colors in total have been collected from the four world famous collections, the street fashion of 2002 F/W 2003 S/S Season and the representative brands in each group for five years from 1999 to 2003 in order to single out the basic colors for the purpose of composing the color groups. Secondly, 687 collected colors have been grouped into 144 colors in total through the three-step process for the extraction of coloring groups. Thirdly, the final extracted colors have been divided into , , , group by the grouping system specified in the precedent study and the said four large groups have been again subdivided into 12 small groups. Fourthly, the suggested colors in each group have established a color coordination system by introducing the concept of the crossover coordination that could be matched with other groups as well as the coordination within the group. Fifthly, we have dyed 144 colors in total that have consisted of the coloring system of four representative groups (twelve subgroups) in each methodical tone as in the above in cotton yarn, one of the representative materials in fabric fashion design industry. Besides, we have specified the symbol of the Pantone Color Book and CMYK values in each color that has consisted of the system considering the industrial characteristics of fashion as a global business and the compatibility with the related design industry. Sixthly, we have packed the completed yam made of fabrics in the designed container for the easy use of cross-coordination and have completed a color coordination system that could be easily utilized for the fashion-related working-level staffs.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.67-85
• /
• 2007

A three-dimensional hydrodynamic model with the fine grid is applied to simulate the barotropic tides, tidal currents, residual currents and salinity dispersions in the Yellow Sea and the East China Sea. Data inputs include seasonal hydrography, mean wind and river input, and oceanic tides. Computed tidal distributions of four major tides($M_2,\;S_2,\;K_1$ and $O_1$) are presented and results are in good agreement with the observations in the domain. The model reproduces well the tidal charts. The tidal residual current is relatively strong around west coast of Korea including the Cheju Island and southern coast of China. The current by $M_2$ has a maximum speed of 10 cm/s in the vicinity of Cheju Island with a anti-clockwise circulation in the Yellow Sea. General tendency of the current, however, is to flow eastward in the South Sea. Surface residual current simulated with $M_2$ and with $M_2+S_2+K_1+O_1$ tidal forcing shows slightly different patterns in the East China Sea. The model shows that the southerly wind reduces the southward current created by freshwater discharge. In summer during high runoff(mean discharge about $50,000\;m^3/s$ of Yangtze), low salinity plume-like structure(with S < 30.0 psu) extending some 160 km toward the northeast and Changjiang Diluted Water(CDW), below salinity 26 psu, was found within about 95 km. The offshore dispersion of the Changjiang outflow water is enhanced by the prevailing southerly wind. It is estimated that the inertia of the river discharge cannot exclusively reach the around sea of Cheju Island. It is noted that spatial and temporal distribution of salinity and the other materials are controlled by mixture of Changjiang discharge, prevailing wind, advection by flowing warm current and tidal current.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.197-203
• /
• 2012

Purpose: In this study, we considerate our radiation therapy process for the breast cancer patient implanted a pacemaker applying the machine movement surgery, shielding, beam selection. Materials and Methods: We perform radiation therapy to a 54 years old, breast cancer patient implanted a pacemaker. The patient underwent a surgery to move the position of a pacemaker to right side breast after consultation with cardiology department. Prescribed dose was 5,040 cGy and daily dose 180 cGy for 28 fractions. The 10 MV photon energy, field size 0/$9.5{\times}20$ cm, half beam and opposing portal irradiation are used. To find out appropriate thickness of shielding board, we carried out an experiment using a solid water phantom ($30{\times}30{\times}7$ cm), a Farmer-type chamber (TN30013, PTW, Germany) and a shielding board (Pb $28{\times}27{\times}0.1$ cm). We calculated expected absorbed dose to te pacemaker with absorb ratio and shielding ratio. In the PTP system (Eclipse, Varian, USA), we figured out how much radiation would be absorbed to the machine with and without shielding. First day of the radiation therapy, we measured head scatter to the pacemaker with MOSFET Dose Verification System (TN-RD-70-W, Medical Canada Ltd., Canada). Results: In the phantom measurement, we found out appropriate thickness was 2 mm of shielding board. In the RTP, when using 2 mm shielding the pacemaker will be absorbed 11.5~38.2 cGy and DVH is 77.3 cGy. In the first day of the therapy, 4.3 cGy was measured so 120.4 cGy was calculated during total therapy. The patient was free from any side effects, and the machine also normally functioned. Conclusion: As the report of association which have public confidence became superannuated, there is lack of data about new machine. We believe that radiation therapy to thiese kind of patients could be done successfully with co-operation, patient-suitable planning, accurate QA, frequent in-vivo dosimetry and monitoring.

• Journal of the Korean Society of Food Culture
• /
• v.1 no.3
• /
• pp.267-278
• /
• 1986

The evolution of Korean fish fermentation technology was reviewed from the old literatures and the on-going processes were surveyed. The principles involved in the traditional fermentation methods were explained by the recent scientific findings. The fish fermentation technology be classified into two groups; jeot-kal process, where. salt is the only material added to the fish for fermentation, and sik-hae process, where cooked cereals, garlic and red pepper powder are added to the salted fish. A total of 46 kinds of jeot-kal was identified in a survey, depending on the raw materials used. The characteristic feature of Korean jeot-kal process is to produce fermented products which still has original shape after 2-3 months of fermentation to be used for side-dishes of rice meal, as well as fish sauce by keeping these products for longer time (over 6 months) for severe ansymematic hydrolysis to be used for the subingredient of Kimchi (Korean fermented vegetable food). The taste of jeot-kal is formed by the protein hydrolymates due to the action of salt-tolerant Pediococcus, Bacillus, Halobacterlum etc. When the taste of jeot-kal deteriorates, yeasts appear to dominate. In ski-hae fermentation, the safety of preserved fish is kept by the rapid decrease in pH resulting from the acid fermentation of added cereals. The roles of cid forming bacteria and proteloytic bacteria are important. The fermentation is completed in 2 weeks and the excess production of acid during prolonged storage limits the taste acceptability. The fish fermentation technology in Korea stands at important position in Korean food science and technology. since the processes of jeot-kal and soysauce have same root in the principle of microbial proteolysis and the processes of sik-hae and Kimchi in the microbial acid production principles.

• 대한공업교육학회지
• /
• v.36 no.2
• /
• pp.131-150
• /
• 2011

The purpose of this study vocational courses in general high schools in each city in order to operate efficiently. Provinces operating status and the general high school vocational courses through the regular high school vocational courses siltae analysis to identify operational problems, and that is to derive ways to improve. Operating in the desired direction, the typical high school vocational courses ilbango select students that meet the purpose of operating as one that students admit you need the correct promotion and career guidance and vocational courses ilbango teachers of vocational courses is operating correctly recognize the purpose and students with career guidance and vocational courses so that you can operate effectively at: Provincial Office-wide need to conduct a systematic study. Vocational courses also target students ilbango sosokgyo (wonjeokgyo) to be completed in the course stated in the plan for the school and the need to practice, and professional students ilbango by configuring a separate class is most preferable to operate. If the person is prime target, with each region run by creating a class needs to definitely consider. Entrusted to the agency's key performance improvements in order to improve the employment rate in the direction of promotional materials for the students selected to take advantage of college enrollment than the employment data for the students and their parents ilbango vocational courses for the purpose and intent is necessary to provide accurate information In addition, the employment rate is relatively low industrial (information) to install the school department employment, and employment representatives (industry-academia co-coordinator), and by placing career paths and industries to ensure the needs of industry, including working conditions and students who wish adjusting to the role, and industrial college (2 years), industrial (information) through the school's agreement to the aggressive promotional schemes seonchwieop hujinhak. Getting the need to encourage. Vocational courses ilbango in the new and the abolition, rather than the case of some popular course when you are away from work and there, so if the course-changing industry, new or repealed to reflect the demands of social work and careful review of how to connect carefully to decide by. Commissioned a systematic quality management in education, in terms of industry (information) schools and public vocational training institutions or private vocational school is better than school. However, 16 cities across the country. Also only five of the major cities around the school has industry information. Ilbango vocational courses at the expected continued demand. Degrees, the operation in terms of comparative advantage in many ways the school's new industry information is necessary to consider.