• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2419-2425
• /
• 2017

In this paper, a system for the precise detection of arcs is proposed for a rigid catenary using a spectrometer. For this purpose, a miniature rigid catenary contact-loss simulator was used. Experiments were performed by varying the amplitude of the excitation frequency with which a real arc can occur using a simulator in the range of 5 to 15 mm. The range of the radiated wavelength of the copper, which is a material in the rigid catenary, and the irradiance were measured using a spectrometer according to the generated contact loss. In addition, the amount was monitored over time and its characteristics were analyzed. The voltage and current of the load were analyzed when the arc occurred due to contact loss. The analytical results will be applied to detect rigid catenary arcs and used as a monitoring system for real vehicles developed in the future. This will prevent abrasion and disconnection in rigid catenary systems.

• 한국전자통신학회논문지
• /
• 제11권4호
• /
• pp.387-394
• /
• 2016

현재 운영되고 있는 제철소의 열연 공장은 24시간 상시 운전을 하고 있다. 각 공정별 주요 기능을 살펴보면 가열로, 조압연, 사상압연 및 권취 등으로 구성되어있으며, 여기에서 두께 및 폭 압연을 하고 이를 위한 소재의 온도를 조절하는데 큰 기능이 있다. 여기에는 작업의 특성상 고장 및 불량 요소가 상당히 많다. 또한 제품의 출하 이후에도 클레임이 발생하면 조사가 필요한 실정이다. 기존의 각 공정별 두께계, 폭계, 온도계에서의 독립적인 데이터 취득 및 모니터링에 의한 운전은 조업자로 하여금 많은 피로감을 준다. 이를 보완하고자 각 공정의 데이터를 통합해서 기능별로 모니터링하고 향후 작업 결과도 확인할 수 있는 통합 모니터링 시스템의 필요성이 대두되었다. 이에 압연공정 품질모니터링 시스템을 개발함으로서 보다 효율적인 운영이 가능하게 될 것으로 기대한다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.256-261
• /
• 2012

Recently, many photovoltaic systems (PV systems) including solar parks and PV farms have been built to prepare for the post fossil fuel era. To investigate the degradation process of the PV systems and thus, efficiently operate PV systems, there is a need to visually monitor PV systems in the range of infrared ray through the Internet. For efficient visual monitoring, this paper explores a multithreaded implementation of a recently developed HEVC standard whose compression efficiency is almost two times higher than H.264. For an efficient parallel implementation under a meshbased 64 multicore system, this work takes into account various design choices which can solve potential problems of a two-dimensional interconnects-based 64 multicore system. These problems may have not occurred in a small-scale multicore system based on a simple bus network. Through extensive evaluation, this paper shows that, for an efficient multithreaded implementation of HEVC intra prediction in a mesh-based multicore system, much effort needs to be made to optimize communications among processing cores. Thus, this work provides three design choices regarding communications, i.e., main thread core location, cache home policy, and maximum coding unit size. These design choices are shown to improve the overall parallel performance of the HEVC intra prediction algorithm by up to 42%, achieving a 7 times higher speed-up.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.543-544
• /
• 2007

This paper introduce methods and analysis of a simple wireless sensor concept for detecting and locating faults as well as for load monitoring are presented. The concept is based on distributed wireless sensors that are attached to the incoming and outgoing power lines of secondary substations. A sensor measures only phase current characteristics of the wire it is attached to, is not synchronized to other sensors and does not need configuration of triggering levels. The main novelty of the concept is in detecting and locating faults by combining power distribution network characteristics on system level with low power sampling methods for individual sensors. This concept enables the sensor design to be simple, energy efficient and thus applicable in new installations and for retrofit purposes in both overhead and underground electrical distribution systems.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.160-164
• /
• 2022

In this paper, through the development of a smart panel (LCD kiosk) controller, contents to develop a system that can be operate in a desired environment by operating the window control and ventilation facilities according to the automatic controller operation based on the set values such as temperature, humidity, sunlight, and rainfall. In particular, the MQTT protocol-based sensor module can be directly manufactured and applied at any time based on various communication and power sources such as wireless, wired, and PLC (power line communication) to obtain the desired data, as well as fire, power failure, and intrusion in the house. It is also a system that enables operation and monitoring from a remote location based on the cloud environment by connecting sensors. Kiosks are currently being used in many places, and the demand for them is on the rise, and an active influx of young people can be expected through environmental improvement. It is expected to increase interest and understanding for improvement.

• Transactions on Electrical and Electronic Materials
• /
• 제7권5호
• /
• pp.247-251
• /
• 2006

The traction DC feeder cable is one of the key devices for the safety operation of subway system, but for low voltage DC feeder cable (<3000 V) for subway, little attention has been paid by investigators on its online monitoring technology. With an introduction of cable laying and operation environment for the cable, this paper investigated the on-line monitoring technology of 1500 V DC feeder cable of subway. Firstly, in the text, the fault model of 1500 V DC cable was proposed based on the analysis of the fault type of the DC feeder cable, and then put forward synthetically on-line monitoring discharge signal and DC leakage current signal to assess DC feeder cable insulating state. The results of laboratory experiment prove that the proposed methods are feasible and can be implemented on-line monitor on DC feeder cable of subway.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.826-831
• /
• 1991

Automated Storage and Retrieval System (AS/RS), which is an element of Computer Integrated Manufacturing (CIM), is a widely used material handling equipment with conveyors and Automatic Guided Vehicles (AGVs). Until now the evaluation of operational policies of AS/RS and control algorithms is done theoretically or by computer simulations. In this study, a real-time control and monitoring software of an AS/RS is also developed by making actually moving AS/RS miniature. A PC-based real-time monitoring program can control the AS/RS directly through the communication port. The monitoring program has additional functions such as storage/retrieval management, inventory management, and statistics management. The program can not only collect the necessary statistics but monitor the current action of the AS/RS concurrently.

• 센서학회지
• /
• 제19권2호
• /
• pp.124-129
• /
• 2010

For the industrial printing applications, the stability of the piezo-driven inkjet printhead is a major requirement. In this paper, we focused on the failure modes of the inkjet printhead and realized a method to detect and repair them at high speed. The printhead monitoring is performed by detecting the residual vibration of the actuating plate using the self- sensing capability of the piezoelectric material. To measure the channel acoustics and to identify the malfunctioning nozzle, we devised the bridge sensing circuitry and failure detection algorithm. The residual vibration signals can be affected by the boundary conditions of the channel acoustics, so it is possible to identify the failure causes by analyzing the monitoring signals. Therefore it is also possible to apply a proper restoring process to the defective printhead. The experimental results show that this method is effective in improving the reliability of the industrial printing.

• 폴리머
• /
• 제38권3호
• /
• pp.272-277
• /
• 2014

고온용 초음파 측정 시스템을 장착한 이축압출기를 이용하여 고에너지 물질 시뮬란트의 분산도를 실시간으로 모니터링하는 연구를 하였다. 결합제 수지 및 충전제로 ethylene vinyl acetate(EVA)와 Dechlorane plus 25를 각각 사용하여 고에너지 물질 시뮬란트 현탁계를 구성하였다. 충전 부피분율이 증가함에 따라 현탁계의 초음파 속도는 전혀 변화를 보이지 않았으나 초음파 감쇠는 선형적으로 감소하였는 바 고르게 분산된 현탁계를 대상으로 초음파 감쇠를 측정하면 충전함량을 추정할 수 있음을 확인하였다. 또한 60 v% 이상으로 충전된 고농축 현탁계에서는 반복 압출실험을 수행한 결과 초음파 감쇠의 편차가 감소하여 직선값에 접근하는 경향을 보이는 바 분산도의 증가하는 것을 알 수 있었다. 따라서 on-line 및 in-line으로 측정된 초음파 감쇠와 off-line으로 SEM 및 Image Analyzer 그리고 열중량분석을 병행함으로써 분산도 및 충전 함량을 평가할 수 있을 것으로 사료된다.

• 한국항행학회논문지
• /
• 제22권2호
• /
• pp.168-172
• /
• 2018

HACCP이란 식품의 원재료부터 제조, 가공, 보존, 유통, 조리단계를 거쳐 최종소비자가 섭취하기 전까지의 각 단계에서 발생할 우려가 있는 위해요소를 규명하고, 이를 중점적으로 관리하기 위한 중요관리점을 결정하여 자율적이며 체계적이고 효율적인 관리로 식품의 안전성을 확보하기 위한 과학적인 위생관리체계라고 할 수 있다. 본 논문에서는 HACCP의 체계적이고 효율적인 관리를 위해 식품의 유통 단계인 운송과정에서의 온도 및 습도를 측정하고, 이 정보를 통신망을 이용하여 주기적으로 서버에 전송하는 모니터링 단말기 및 이를 구현하는 firmware를 설계하였다. Sub-net에서 측정된 정보를 포함하여 단말기에서 전송된 데이터가 서버에 잘 저장되었으며 서버에서 보낸 응답도 단말기에 잘 수신됨을 확인하였다. 향후 이를 이용하여 식품의 이력관리 및 데이터 추적, 통계자료로 활용할 수 있을 것으로 기대된다. 또한 본 시스템은 학교나 직장 등 단체 급식소, 원재료나 식품 보관 등의 물류창고 등에서도 응용할 수 있는 시스템이 될 것으로 사료된다.