The Journal of the Korea institute of electronic communication sciences (한국전자통신학회논문지)

Korea Institute of Electronic Communication Science (한국전자통신학회)
권호 표지
DOI QR코드

DOI QR Code

Development of quality monitoring system using thickness gauge, width gauge, themometer for a rolling operation in hot rolling mill plant

열연공장의 압연공정 두께계 폭계 온도계를 이용한 품질모니터링 시스템 개발

  • 주종율 (순천대학교 컴퓨터과학과) ;
  • 오재철 (순천대학교 컴퓨터공학과)
  • Received : 2016.02.26
  • Accepted : 2016.04.24
  • Published : 2016.04.28
Download PDF
⟨ Previous Next ⟩

Abstract

Today, hot rolled mill plant are currently operating 24 hours a day. The main processes of hot-rolled steel mill are Reheating Furnace, Roughing Mill, Fishing Mill and the Down Coiler. In the process checking over the thickness and width of rolled material, temperature control is an important factor. It is quite often the cause of the work breakdown and find a bad elements for product. After the shipping out the product, when a claim occurs requires an investigation. In each process of the conventional thickness gauge, width, and thermometer. Operation by an independent data acquisition and this monitoring is problematic and straining of the operator. The monitoring process the data of each function and incorporate monitoring results can also check future work. The installation of this system will improve our efficiency and productivity. In the rolling process by developing more efficient operating quality monitoring system, this will be made possible.

현재 운영되고 있는 제철소의 열연 공장은 24시간 상시 운전을 하고 있다. 각 공정별 주요 기능을 살펴보면 가열로, 조압연, 사상압연 및 권취 등으로 구성되어있으며, 여기에서 두께 및 폭 압연을 하고 이를 위한 소재의 온도를 조절하는데 큰 기능이 있다. 여기에는 작업의 특성상 고장 및 불량 요소가 상당히 많다. 또한 제품의 출하 이후에도 클레임이 발생하면 조사가 필요한 실정이다. 기존의 각 공정별 두께계, 폭계, 온도계에서의 독립적인 데이터 취득 및 모니터링에 의한 운전은 조업자로 하여금 많은 피로감을 준다. 이를 보완하고자 각 공정의 데이터를 통합해서 기능별로 모니터링하고 향후 작업 결과도 확인할 수 있는 통합 모니터링 시스템의 필요성이 대두되었다. 이에 압연공정 품질모니터링 시스템을 개발함으로서 보다 효율적인 운영이 가능하게 될 것으로 기대한다.

Keywords

References

  1. Y. Park, "A study of Water Level Control System," J. of the Korea Institute of Electronic Communication Sciences, vol. 5, no. 5, 2010, pp. 504-508.
  2. Y. Bae, "Development of Monitoring System for Safety Operation of Crane," J. of the Korea Institute of Electronic Communication Sciences, vol. 9, no. 11, 2014, pp. 1305-1310. https://doi.org/10.13067/JKIECS.2014.9.11.1305
  3. H. Kim, "Internal communication as CCTV Automatic Climate Control System Development," J. of the Korea Institute of Electronic Communication Sciences, vol. 10, no. 4, 2015, pp. 433-439. https://doi.org/10.13067/JKIECS.2015.10.4.433
  4. G. Yeom and C. Jeong, "A Design of Policy-Based Composite Web Services QoS Monitoring System," J. of the Korea Society of Computer and Information, vol. 14, no. 10, 2009, pp. 189-197.
  5. M. Chun, J. Cheong, I. An, and Y. Moon, "Finite Element Analysis of Slab Deformation under the Width Reduction in Hot Strip Mill," Trans. of Materials Processing, vol. 12, no. 7, 2003, pp. 668-674. https://doi.org/10.5228/KSPP.2003.12.7.668
  6. J. Jeong, K. Lee, S. Lee, I. Lee, S. Lee, H. Kim, K. Lee, and B. Kim, "Prediction of Plastic Deformation Behavior of the Side Surface of Slab during Hot Rough Rolling," Trans. of Materials Processing, vol. 23, no. 7, 2014, pp. 425-430. https://doi.org/10.5228/KSTP.2014.23.7.425
  7. B. Koo, W. Gon, and S. Won, "Fault detection observer and fault tolerant control for steering control system in hot rolling finishing mill," 2015 30th Institute of Control, Robotics and Systems Annual Conference, Daejeon, Korea, May, 2015, pp. 277-278.
  8. H. Park, H. Kim, and G. Song, "Introduction of Heat Transfer in Hot-rolling Process," Proc. of the The Korean Federation of Mechanical Engineers Socitis 2002 Joint Symposium, Seoul, Korea, Nov, 2002, pp. 1459-1464.
  9. C. Park and K. Yoon, "LBCC of Transient State for High Strength Steel in Hot Strip Mills," J. of Institute of Control, Robotics and Systems, vol. 17, no. 4, 2011, pp. 382-387. https://doi.org/10.5302/J.ICROS.2011.17.4.382
  10. S. Lee, H. Park, and C. Park, "Design of LTBC Controller for Tension Control in Down Coiler Process of Hot Strip Mills," J. of Institute of Control, Robotics and Systems, vol. 21, no. 4, 2015, pp. 301-308. https://doi.org/10.5302/J.ICROS.2015.14.8037