• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.614-622
• /
• 2014

Melons (Cucumis melo L.) are generally grafted onto Cucurbita rootstocks to manage soilborne pathogens such as Monosporascus root rot and v ine decline (MRR/VD) and Fusarium wilt. However, g rafting onto Cucurbita rootstocks reportedly results in the reduction of fruit quality. In this study, the resistance to MRR/VD, yield, and fruit quality of melons grafted onto melon rootstocks were evaluated under greenhouse conditions. Eight melon rootstocks (R1 to R8) were used and the inodorus melon 'Homerunstar' was used as scion. Melon rootstocks R1 to R6 were selected based on resistance to MRR/VD under greenhouse conditions. Non-grafted 'Homerunstar' and plants grafted onto squash interspecific hybrid 'Shintozwa' rootstock (Cucurbita maxima D. ${\times}$ C. moschata D.) served as controls. Grafted melons were cultivated in the greenhouse infested with Monosporascus cannonballus during two growing seasons (summer and autumn). The responses to MRR/VD, yield, and fruit quality differed depending on the rootstocks and growing season. The melons grafted onto 'Shintozwa' exhibited less severe disease symptoms and higher survival rates than non-grafted melons in both seasons. While the melon rootstocks in the summer cultivation did not increase the survival rate compared to non-grafted melons, the melon rootstocks R1 and R2 in the autumn cultivation led to higher survival rates. The melon rootstocks resistant to MRR/VD increased the percentage of marketable fruits and marketable yields. Grafting onto the melon rootstocks caused little or no reduction of fruit quality such as low calcium content, fruit softening, and vitrescence, especially in lower-temperature autumn season. Accordingly, these results suggest that grafting onto the melon rootstocks may increase the tolerance to MRR/VD and the marketable yield without a reduction of fruit quality.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.68-73
• /
• 1995

This study was carried out to investigate the effect of the concentration of nutrient solution on growth of tomato(Lrcopersicon esculentum Mill. cv. seokwang) in substrate culture. The substrates used in the experiment were perlite, vermiculite, and peatmoss. Tomato plants were treated with different concentrations of nutrient solution, viz. 0.5, 1.0, 2.0, 3.0, and 5.0mS/cm at seedling stage and transferred to different treatments, 1.0, 2.0, and 3.0mS/cm after transplanting in each substrate. Total fruit number, total yield, marketable fruit number, and marketable yield were much higher at 2.0-3.0mS/cm than at 1.0mS/cm in all three substrate culture. The percentage of malformed fruit was in order of peatmoss>perlite> vermiculite and Vitamin C content was vermiculite> perlite> peatmoss. In all three substrate culture, high marketable yield was shown when tomato plants grew with concentration of 2.0-5.0mS/cm at seedling stage and 2.0-3.0mS/cm after transplanting. The concentrations of nutrient solution after transplanting as well as at seedling stage had a great influence on total yield, marketable yield, and soluble solids. However total and marketable fruit number were considerably affected by the concentrations of nutrient solution after transplanting.

• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.226-232
• /
• 2004

This experiment was conducted to investigate the effect of night and daytime temperatures on growth and yield of paprika 'Fiesta' and 'Jubilee' under soil culture experiment in the vinyl houses during the 2003 and 2004 season. Total fruit yield was greater in 'Fiesta' than 'Jubilee' Marketable yield was not different between two cultivars, due to lower $\%$ marketable fruits in 'Fiesta'. mean Fruit weight was not different between two cultivars. Difference of yield between cultivars was due to fruit number, harves time and root condition. It was caused by cracked fruits to decrease $\%$ marketable fruits. Total yield was greater in nighttime temperature of $18^{\circ}C\;than\;15^{\circ}C$ and marketable yield was considerably greater because of $\%$ marketable fruits was higher. Mean fruit weight was slightly greater in nighttime temperature of $15^{\circ}C\;than\;18^{\circ}C$. Difference of fruit yield in treatments of nighttime temperature was due to fruit number and harvest time. There was not significant difference of yield between daytime temperature of $28^{\circ}C\;and\;31^{\circ}C$, but in $34^{\circ}C$, total and marketable yields were the least and mean fruit weight was the smallest because of decreased $CO_2$ concentration in the house, accerated vegetative growth, and the least chlorophyll content. There were no significant difference in photosynthetic rate, transpiration rate, maximal photochemical efficiency and antioxidant enzyme activities of all temperature treatments in this experiment. However it was clear that a little difference in error range of these results affects the source of crops in any case. It was not acknowledged that compensation effect by high temperature in daytime to the low temperature treatment in nighttime.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.298-302
• /
• 2013

The experiment was carried out to examine the effect of planting date on the growth and marketable yield on rain shielding vinyl house in Busan area. Okra cultivars were 'Jukokra', 'Greensod', 'Marumichang', 'Betafive' and 'Akamarumichang'. Planting date were June and July. Plant height, stem length and leaf width were significantly different between various cultivars. Plant height and stem length were best at 'Akamarumichang' among all cultivars tested and the 'Betafive' cultivars showed the lowest plant growth of June treatment. There was no significant difference in planting of July treatment. Marketable yield of okra fruit was affected by planting date. In case of June planting date, 'Betafive' cultivars produced the highest marketable yield (4,286 kg/10a) in green fruit. Marketable yield of green okra fruit was increased at 'Betafive' and 'Greensod' cultivars, whereas 'Marumichang' cultivars was lowerd. Therefore, the optimum planting date was considered June planting in rain shielding culture of okra in Busan area.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.194-198
• /
• 2007

This study was performed to determine the optimum concentration of potassium for the foliar application, and its application stage to increase the production of marketable sized tomato. For this purpose, 0.25, 0.5 and 1.0 percent of potassium phosphate $(KH_2PO_4)$ were applied in the leaves of tomatoes by the stage of flowering, fruit setting and fruit development. The control plants were applied with distilled water. The results showed that foliar application with 0.5 percent of potassium phosphate increased the proportion of medium sized fruit of the products by 29.5 percent compared to the controlled plants, which is highest in the treatments. The foliar application of 0.5 percent of potassium phosphate at the fruit setting stage increased the yield of marketable sized fruit by 5.9 percent compared to the controlled plants.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.167-173
• /
• 2007

This study was conducted to improve light environment of oriental melon cultivation in winter season. Three polyolefin foreign films (J-1, J-2, J-3) and three polyethylene domestic films (K-1, K-2, K-3) with different film thickness, ultraviolet ray interception and infrared ray absorption were used. As the result of this experiment, soluble solid of oriental melon fruit in K-3 was $14.3^{\circ}Brix$, those in J-3 and J-2 were higher by 1.3 and $0.8^{\circ}Brix$, respectively. Chromaticity (a value) of pericarp in K-3 was 0.5, those in J-3, J-1 and J-2 were higher by 3.3, 2.3 and 1.9, respectively. Especially, fermented and malformed fruit rates in J-1, J-2 and J-3 were decreased and marketable fruit rates were increased. Marketable yield in K-3 was 1,622 kg per 10a, those in J-1, J-3 and J-2 were increased by 31.2%, 23.8% and 18.5% compare to K-3, respectively. In this study, Polyolefin films (J-1, J-2, J-3) with thickness and infrared ray absorption ratio keeping higher heat conservation, therefore, soluble solid and chromaticity of fruit were increased, fermented fruit rate was decreased, and marketable fruit rate and yield were increased.

• Journal of Bio-Environment Control
• /
• v.24 no.1
• /
• pp.27-33
• /
• 2015

High temperature stress in summer season at plastic house is a limiting factor for tomato fruit set and yield. This study was performed to assess the effects of gibberellic acid ($GA_3$) and 2,4-Dichlophenoxy acetic acid (2,4-D) spray on fruit set, yield, and quality of tomato cv. 'Adoration'(Enza Zaden Co., Ltd.) under the plastic house in Hwacheon, 2011. Four concentrations (0-, 5-, 10- and $15mg{\cdot}L^{-1}$) of $GA_3$, and three concentrations (0-, 5- and $10mg{\cdot}L^{-1}$) 2,4-D were sprayed in early flowering of tomato in the plastic house, and fruit set, yield and quality characters were observed. The results showed that spray of $10mg{\cdot}L^{-1}$ $GA_3$ significantly increased the fruit set by 14.2% than unsprayed. The spray of $GA_3$ significantly increased the marketable fruit number, fruit weight, and yield. The spray of 2,4-D on blossoms significantly affected the fruit set percentage, fruit weight, marketable fruit weight and yield, and the highest fruit set observed as 62.5% in combined spray of $GA_3$ and 2,4-D at each $5mg{\cdot}L^{-1}$. Fruit size and total soluble solids significantly varied with the concentrations of $GA_3$ sprayed. The result indicates that the spray of $10mg{\cdot}L^{-1}$ $GA_3$ and $5mg{\cdot}L^{-1}$ 2,4-D can be more economic and effective to increase the fruit set, and yield in tomato under high temperature condition in plastic house.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.105-111
• /
• 2012

This study was conducted to evaluate the influence of fruit setting order by flower cluster on the fruit weight and the soluble solids content for the strawberry of 'Seolhyang' cultivar. The first flower cluster had higher fruit number, fruit weight, soluble solids content and ratio of large fruit compared to the second and third flower cluster. The fruit set on the upper position fruit in the same flower cluster had higher fruit weight and the soluble solids compared to the fruit set on the lower position fruit in the flower cluster. The fruit weight was highly positive correlated with the soluble solids content. The result indicated that the number of fruit set for marketable yield seemed to be 9-10 per the first flower cluster, 6 per the second flower cluster, 4 per the third flower cluster and 3 per the fourth flower cluster in 'Seolhyang' cultivar.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.205-211
• /
• 2014

This study aimed to examine the effect of different fruit-loads on fruit yield, quality, and plant growth of 'Seolhyang' strawberry. Fruit loads were adjusted from the first to the fourth flower cluster so that the number of fruits became 20, 25, and 30, and non-flower thinning of some was made. The more the number of fruits per plant was, the greater the total yield obtained, but marketable yield decreased and non-marketable yield increased. Compared to the treatment whose fruit load was adjusted, the control with non-flower thinning had more fruit yield in the first and second flower clusters but tended to have less fruit yield in the third and fourth flower clusters. The lower the fruit load was, the more soluble solids content of fruits increased. The lower the fruit load of a flower cluster was, the faster its harvest time reached. Harvest of fruit load of 20 was faster by 10 days in the second and fourth flower clusters relative to the control. On November 24, 2012, flowering thinning of the first flower cluster was made. On March 7, 2013, fruit dry weight of the second flower cluster was most heavy in the control. Dry weight of roots decreased in the control and the fruit load of 30 compared to November 24. On April 9, fruit dry weight of the third flower cluster did not have significant difference according to fruit load, however the more the fruit load was, the smaller dry weight of leaf, root, and crown became, which were vegetative organs. On May 12, the more the fruit load, the smaller leaf area and dry weight of vegetative organs and differences from varying fruit-loads became considerable in later period of growth. Appropriate fruit load of 'Seolhyang' strawberry were from 20 to 25. Maintaining balance between vegetative and fruit growth by adjusting fruit load is very important for stable fruit production.

• Journal of Bio-Environment Control
• /
• v.12 no.1
• /
• pp.17-21
• /
• 2003

This experiment was conducted to find out the method of preventing decrease in the marketable yield of oriental melon (Cucumis melo L. var. makuwa MAKINO) under low light intensity. By maintaining low light of 400 $\mu$mol$.$m$^{[-10]}$ 2$.$S$^{-1}$ from 10 days after fruit set to fruit enlargement period, the photosynthetic rate and chlorophyll contents of leaf were reduced. Leaves which had no urea application showed largely decreased photosynthetic rate The content of soluble solids was lower$.$ in the low light than natural light treatment. Regardless of foliar application of urea, % fermentation fruits was under 4% in the natural light treatment and over 10% in the low light treatment. The less the fruit thinning, the greater was % fermentation fruits under low light condition. The % fermentation fruits were 39% and 40% in no fruit thinning treatment. The harvest was delayed under low light condition regardless of foliar fertilization. As the number of thinned fruits was decreased, the harvest time was delayed more. Marketable yield per plant sharply decreased under low light intensity. Compared with natural light, the yield under low light treatment was 16∼34%. The treatment fertilized with 0.5% urea on leaf had 34% greater harvest index of marketable yield than other treatments. In conclusion, when the long low light condition from 10th day after fruiting was forecasted, thinning two fruits out of six fruits and two times foliar fertilization with 0.5% urea should be applied.